RDL RACK-UP 4×1 Remote-Controlled Stereo Audio Switcher with VCA


  • 4 Stereo Inputs / 1 Stereo Output
  • Balanced/Unbalanced Inputs & Output
  • Rear-Panel Detachable Terminal Blocks
  • Remote Switching & Level Control
  • 96 dB Attenuation Range in 0.5 dB Steps
  • Noiseless Zero-Crossing Adjustment
  • Precise Level Tracking on Each Channel
  • Gain Trim on Each Source
  • Open-Collector Output for Selected Input
  • Various Remote Control Options

2,999.00 د.إ

TheĀ RU-ASX4DR 4×1 Remote-Controlled Stereo Audio Switcher with VCAĀ fromĀ RDLĀ is a four-channel stereo audio selector with input gain adjustment, output level metering, and an internal stereo VCA for setting the output level. Source selection and level adjustment are done remotely, from one or multiple locations. The unit is equipped with rear-panel terminals that provide flexible control options using a variety of optional remote controls from RDL or other brands. The inputs and output are on rear-panel detachable terminal blocks.

Each of the four stereo line-level inputs accepts either a balanced or an unbalanced signal and is equipped with a rear-panel screwdriver-adjustable input gain trimmer. Input signal levels between -15 dBV and 8 dBu may be set to the proper operating level as indicated by a stereo dual-LED VU meter, ensuring ample headroom at all normal operating levels. The module is equipped with two identical sets of stereo dual-LED VU meters, one on the front panel and one on the rear panel. The maximum input level is +25 dBu.

The audio output level is controlled by a remote 10-kilohm linear taper pot or by 0 to 10 VDC. A single remote control location is possible using a remote 10-kilohm potentiometer. The RU-ASX4DR is compatible with RDL D SERIES-RLC10 rotary remote controls that provide user adjustment at single or multiple locations. Audio levels are controlled in 0.5 dB steps using noiseless zero-crossing digital attenuators for reliability and precise tracking. The output is stereo line-level and each output channel may be connected balanced or unbalanced.

Remote-controlled switching and level control
Multiple switching control points
Four stereo inputs to one stereo output
Line-level audio switching
External level control using an optional 10-kilohm potentiometer
External level control using 0 to 10 VDC
96 dB attenuation range in 0.5 dB steps
Noiseless, zero-crossing adjustment steps
Precise level tracking on each channel
Balanced/unbalanced inputs and output
Gain trim on each source
Open-collector output for selected input
Controllable using various separately available RDL remote controls (options include sequential remote control, momentary remote control, and external open-collector momentary closure to ground)
Silent operation using only solid-state switching circuitry
Each VU meter, left and right, is calibrated to 4 dBu
Front-panel LED indicates selected source (only one source may be selected at a time)
Very low distortion
Crosstalk isolation
Wide, flat-frequency response
Low noise and high commmon-mode signal rejection
Runs on 24 VDC connected via rear-panel detachable terminal block
SKU: RU-ASX4DR Category: Tag:
Input
Audio Inputs
4x Block 5-Pin Female Balanced/Unbalanced Line
Output
Audio Outputs
1x Block 5-Pin Female Balanced/Unbalanced Line
Audio Performance
Max Input Level
Line Input:Ā +25 dBu
I/O Impedance
Input:
20 Kilohms (Balanced)
10 Kilohms (Unbalanced)
Frequency Response
10 Hz to 20 kHz ±0.2 dB
SNR
<85 dB
THD+N
<0.01%
Wi-Fi
No
Bluetooth
No
Power
Power I/O
1x Proprietary (24 VDC ) Input
Environmental
Operating Temperature
32 to 87°F / 0 to 55°C
General
Certifications
CE
Dimensions
5.3 x 3.4 x 1.6″ / 13.46 x 8.64 x 4.06Ā cm
Weight
1.22Ā lb / 553Ā g
Packaging Info
Package Weight
1.58 lb
Box Dimensions (LxWxH)
7.1 x 6.2 x 2.8″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “RDL RACK-UP 4×1 Remote-Controlled Stereo Audio Switcher with VCA”

There are no reviews yet.