S2350-28TP-PWR-EI-AC Huawei S2300 Series Switch


Model: S2350-28TP-PWR-EI-AC Huawei S2300 Series Switch
Detail:
S2350-28TP-PWR-EI-AC(24 Ethernet 10/100 PoE+ ports,2 Gig SFP and 2 dual-purpose 10/100/1000 or SFP,AC 110/220V)

AED6,499.00

Huawei S2300 Series Switch S2350-28TP-PWR-EI-AC 24 Ethernet 10/100 PoE+ ports, 2 Gig SFP and 2 dual-purpose 10/100/1000 or SFP,AC 110/220V,QoS, comprehensive Layer 2 Feature.

Quick Specs

Table 1 shows the Quick Specs.

Product Code S2350-28TP-PWR-EI-AC
Ports 28
Maximum stack bandwidth (bidirectional) 10 Gbit/s
Transmission Rate 10/100/1000Mbps
Memory (RAM) 256 MB
Flash 200 MB
Mean time between failures (MTBF) 78.29 years
Stack port Two uplink 1000BASE-X optical ports
Noise under normal temperature (27°C, sound power) less than 52 dBA
PoE Yes
Dimensions (W x D x H) 442.0 mm x 310.0 mm x 43.6 mm
Weight ≤ 5 kg

 

Note:

ā‘  Twenty-four PoE+ 10/100BASE-TX electrical ports 2 Two 1000BASE-X optical ports
ā‘” Two 1000BASE-X optical ports

Applicable modules and cables:

Ā·GE optical module l GE-CWDM optical module
Ā·GE-DWDM optical module l GE SFP copper module
Ā·Stack optical module l 1 m, 10 m SFP+ copper cables
Ā·3 m, 10 m AOC cables

ā‘¢ Two combo ports (10/100/1000BASE-T + 100/1000BASE-X) Modules applicable to combo optical ports: l FE optical module

Ā·GE optical module l GE-CWDM optical module
Ā·GE-DWDM optical module

ā‘£ One console port

 

Note:

ā‘  Ground screw NOTE It is used with a ground cable.
ā‘” Jack reserved for AC terminal locking latch

NOTE:Ā The AC terminal locking latch is not delivered with the switch.

ā‘¢ AC power socket

NOTE:Ā It is used with an AC power cable

 

S2350-28TP-PWR-EI-AC Specifications

Technical Specifications

Item Description
Memory (RAM) 256 MB
Flash 200 MB
Mean time between failures (MTBF) 78.29 years
Mean time to repair (MTTR) 2 hours
Availability > 0.99999
Service port surge protection Common mode: ±6 kV
Power supply surge protection ±6 kV in differential mode, ±6 kV in common mode
Dimensions (W x D x H) 442.0 mm x 310.0 mm x 43.6 mm (17.4 in. x 12.2 in. x 1.72 in.)
Weight ≤ 5 kg (11.02 lb)
Stack ports Two uplink 1000Base-X optical ports
RPS Not supported
PoE Supported
Rated voltage range 100 V AC to 240 V AC, 50/60 Hz
Maximum voltage range 90 V AC to 264 V AC, 47 Hz to 63 Hz
Maximum power consumption (100% throughput, 100% PoE loads, full speed of fans) 445 W (system power consumption: 75 W, PoE: 370 W)
Operating temperature -5°C to +50°C (23°F to 122°F) at an altitude of 0-1800 m (0-5096 ft.)

NOTE:

When the altitude is between 1800 m (5096 ft.) and 5000 m (16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).

Storage temperature -40°C to +70°C (-40°F to +158°F)
Noise under normal temperature (27°C, sound power) < 52 dBA
Relative humidity 5% to 95%, noncondensing
Operating altitude 0-5000 m (0-16404 ft.)
Certification Ā·EMC certification

Ā·Safety certification

Ā·Manufacturing certification

Performance Specifications

Ethernet MAC:16K

VLAN:4K

Maximum number of Eth-Trunks:8

Maximum number of dynamic ARP entries in the system:256

QoS Maximum number of outbound QoS queues on an interface:8

CAR:8 Kbit/s

ACL ACLv4: Supports a maximum of 500 inbound and outbound ACLv4 entries.

ACLv6: Supports a maximum of 500 inbound and outbound ACLv6 entries.

IP unicast IPv4 Route capacity:32

IPv6 Route capacity:16

Multicast Number of multicast groups on the switch:1K
Reliability RRPP:

Ā·Maximum number of RRPP instances: 64

Ā·Maximum number of RRPP rings: 16

Ā·Maximum number of RRPP domains: 8

Smart Link:

Ā· Maximum number of instances: 64

Ā· Maximum number of Smart Link groups: 16

MSTP:

Ā· Maximum number of MSTIs: 64

VBST:

Ā·Number of protected VLANs: 128

SEP:

Ā·Maximum number of segments: 16

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “S2350-28TP-PWR-EI-AC Huawei S2300 Series Switch”

There are no reviews yet.