Samsung HS08RHF / W534M 80GB 3.6K 1.8″ Ultra Mobile SATA

Capacity: 80GB
Spindle Speed: 3,600RPM
Interface Type: SATA (1.8″) Micro for ultra mobile applications
Disk Size: 1.8″x5mm
Sustained Throughput (MBps): 
Average Seek Time (read/write ms): 14
Electrical Interface Speed: SATA 300 – 3.0Gbps
On-Board Cache: 16MB

Samsung SPINPOINT N3C HS08RHF / W534M 80GB 3.6K 1.8″ Ultra Mobile SATA Hard Drive 

• Formatted capacity : 80GB
• High Speed Digital Signal Processor Based Architecture
• Low Power HDC
• Advanced Power Management Control
• Fluid Dynamic Bearing Spindle Motor Technology
• SATA S.M.A.R.T Compliant
• SATA 48-bit Address Feature Set
• Multi-Burst On-The-Fly Error Correction
• SilentSeek™
• Free Fall Sensor (optional)

• Drive Configurations
  Capacity *	80 GB
  Interface	SATA 300
  Buffer DRAM Size	16 MB
  Byte per Sector	1K
  Rotational Speed	3600 RPM class

   

  Performance Specifications
  Average Seek time(typical)	15.0 ms
  Average Latency	8.3 ms
  Drive Ready Time(typical)	300 Mb/s

   

  Reliability Specifications
  Non-recoverable Read Error	1 sector in 10^13 bits

   

  Acoustics
  Idle	2.2 Bel
  Performance Seek	2.4 Bel

   

  Environmental Specifications
  Temperature / Operating	0 ~ 60 ℃
  Temperature / Non-operating	-40 ~ 85 ℃
  Humidity(non-condensing) / Operating	8 ~ 90 ％
  Humidity(non-condensing) / Non-operating	8 ~ 90 ％
  Liner Shock(1/2 sine pulse) / Operating	600 G
  Liner Shock(1/2 sine pulse) / Non-operating	1500 G
  Vibration / Operating	0.67 Grms
  Altitude(relative to sea level) / Operating	-300 to 3.000 m
  Altitude(relative to sea level) / Non-operating	-400 to 15,000 m

   

  Power Requirements
  Voltage	+3.3V ±5%
  Spin-up Current (Max.)	540 mA
  Seek (typical)	1.30 W
  Read/Write (typical)	1.50 W
  Idle (typical)	0.40 W
  Standby (typical)	0.12 W
  Sleep (typical)	0.10 W

   

  Physical Dimension
  Height (Max.)	5.0 mm
  Width	71.0 mm
  Length	54.0 mm
  Weight (avg.)	48 g