SanDisk SD7UB2Q-010T 1TB SATA Solid State Drive


Capacity:Ā 1TB

Speed:Ā Solid State Memory

Interface Types:Ā SATA

Form Factor:Ā 2.5inx7mm Fits All laptops

Encryption/SED Supported

Sector Size:Ā 512 / 512e

Electrical Interface:Ā SATA 600 – 6.0Gbps

SSD Type:Ā MLC

SSD Endurance DWPD:Ā Consumer / Value

د.إ2,799.00

SanDisk SD7UB2Q-010T X300s 1TB 2.5in 6Gbps MLC SED SATA SSD – Brand New

SanDisk SD7UB2Q-010T X300s 1TB 2.5″ 6.0 Gbps, Multi-Level Cell, Self-Encrypting, Serial ATA Solid State Drive – Brand New

Security Without Sacrificing Performance
Ideal for corporate PCs and notebooks, the X300s features industry-standard security support and a Device Sleep (DEVSLP) low-power mode. Experience greater productivity with an increase in useable hours per battery charge, and rest easy knowing your data is secure while on the go.

  • Self-encrypting SSD using AES 256-bit encryption
  • Support for TCG Opal 2.0 and MicrosoftĀ® Encrypted Hard Drives
  • Compatible with WindowsĀ® 8 InstantGo
  • Advanced flash management
  • Thermal throttling
  • Tiered caching—volatile and non-volatile cache
  • Includes WaveĀ® ESC Encryption Software

 

Security
The X300s supports the TCG Opal 2.0 and Microsoft Encrypted Hard Drive industry security standards and is supported by a broad ISV ecosystem.

Security Management Software
SanDisk’s broad ecosystem of independent software vendors (ISVs) for security management delivers easier data protection management in today’s multiplatform environments, as well as cloud-based manageability of SE-SSDs, making them a viable option for businesses with a wide range of IT requirements and budgets. This ecosystem also allows corporations to meet many of the regulatory standards for encryption of protected employee data such as those mandated by HIPAA, Sarbanes-Oxley, PCI-DSS, and many state and local privacy laws. Corporations can easily deploy Data Loss Prevention methods to protect corporate IP, meet compliance laws, and reduce overall TCO.

Advanced Power Management
The drive utilizes a SATA DEVSLP low-power mode, compatible with WindowsĀ® 8 InstantGo, to minimize its power consumption during idle periods. DEVSLP enables the SSD to completely shut off its SATA PHY, resulting in much lower power consumption compared to SATA Slumber. This increases the amount of usable hours per battery charge5, which is essential for modern mobile devices.


Compatibility:

This drive is compatible with any server that accepts 2.5in x 7mm SATA drives.

SPECIFICATIONS
Model Number SD7UB2Q-010T
Form Factor 7mm 2.5 inch Cased
Capacity 1TB/1000GB
Interface SATA Revision 3.2 (6 Gb/s) backward compatible to SATA Revision 2.0 (3 Gb/s) and SATA Revision 1.0 (1.5 Gb/s)
Sequential Read/Write Up to 520/460MB/s
Latency Read/Write 55/65μs
Active Power (W) 0.12
Operating Temperature 0°C to 70°C
Non-operating Temperature -55°C to 85°C
Operating Vibration 5.0 gRMS, 10 – 2000 Hz
Non-operating Vibration 4.9 gRMS, 7 – 800 Hz
Operating/Non-operating Shock 1,500 G @ 0.5 msec half sine
Certifications FCC, CE, UL, ULc, TUV, KC, BSMI, ACA, VCCI

 


Weight:Ā 0.5Ā lb

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “SanDisk SD7UB2Q-010T 1TB SATA Solid State Drive”

There are no reviews yet.