Seagate Barracuda 250GB IDE Hard Drive ST3250820A
Capacity: 250GB
Spindle Speed: 7,200RPM
Interface Type: IDE / ATA (3.5″)
Disk Size: 3.5″x1.0″ (LFF Hard Drive)
Sustained Throughput (MBps): 65
Average Seek Time (read/write ms): 8 / 9
Electrical Interface Speed: EIDE / Ultra ATA/100 – 100MBps
On-Board Cache: 8MB
Key Features and Benefits
- Broad range of capacities, from 200 GB to 750 GB, the highest in the INDUSTRY
- Available interfaces: SATA 3Gb/s, SATA 1.5Gb/s or Parallel ATA/100
- Perpendicular recording TECHNOLOGY
for maximum drive capacity and reliability
- 8- and 16-MB cache buffer options
- Ultra-fast performance
- Superb reliability
- Whisper-quiet operation
- Enhanced G-Force Protection against handling damage
- 78 MB/s maximum sustained data transfer rate
- Clean Sweep calibration and Directed Offline scan diagnostics
- RoHS (restriction of hazardous substances) compliant
- 5-year warranty
Applications
- Gaming PCs
- Workstations
- High-end PCs
- Desktop RAID
- Mainstream PCs
- xATA servers
- USB/FireWire/eSATA external storage
-
Drive specification
ST3300820A
ST3300620A
ST3250820A
Formatted Gbytes (512 bytes/SECTOR
)*
300
250
Guaranteed SECTORS
586,072,368
488397168
Bytes per SECTOR
512
Default SECTORS
per track
63
Default read/write heads
16
Default cylinders
16,383
Internal data transfer rate (Mbytes/sec max)
95
I/O data transfer rate (Mbytes/sec max)
150
ATA data-transfer modes supported
PIO modes 0–4Multiword DMA modes 0–2Ultra DMA modes 0–6
SATA data-transfer modes supported
1.5 Gbits/sec
Cache buffer
8 Mbytes
16 Mbytes
8 Mbytes
Height (max)
26.11 mm (1.028 inches)
Width (max)
101.85 mm (4.010 inches)
Length (max)
146.99 mm (5.787 inches)
Weight (max) grams / lb.
635 / 1.39
Average latency (msec)
4.16
Power-on to ready (typical)
10 sec
Standby to ready (typical)
10 sec
Track-to-track seek time (msec typical)
0.8 (read), 1.0 (write)
Average seek, read (msec typical)
8.0
Average seek, write (msec typical)
9.0
Startup current (typical) 12V (peak)
2.8 amps
Seek power (typical) watts
9.9
Operating power (typical) watts
9.2
Idle mode (typical) watts
7.2
Standby mode (typical) watts
1.2
Sleep mode
1.2
Voltage tolerance
(including noise)
5V ± 5%
12V ± 10%
Ambient temperature
0° to 60°C (op.)
–40° to 70°C (nonop.)
Temperature gradient
(°C per hour max)
20°C (operating)
30°C (nonoperating)
Relative humidity
5% to 90% (operating)
5% to 95% (nonoperating)
Relative humidity gradient
30% per hour max
Wet bulb temperature(°C max)
37.7 (operating)
40.0 (nonoperating)
Altitude, operating
–60.96 m to 3,048 m
(–200 ft to 10,000+ ft)
Altitude, nonoperating (meters below mean sea level, max)
–60.96 m to 12,192 m
(–200 ft to 40,000+ ft)
Shock, operating (max at 2 msec)
63 Gs
Shock, nonoperating (max at 2 msec)
300 Gs
Vibration, operating
5–22 Hz: Limited displacement
23–350 Hz: 0.5 G acceleration
Vibration, nonoperating
5–22 Hz: Limited displacement
23–350 Hz: 5 Gs acceleration
Drive acoustics, sound power (bels)
Idle**
2.8 (typical)
3.4 (max)
Performance seek
3.7 (typical)3.9 (max)
Nonrecoverable read errors
1 per 1014 bits read
Annualized Failure Rate (AFR)
0.34%
Service life
5 Years
Contact start-stop cycles(25°C, 50% relative humidity)
50,000
Supports Hotplug operation per SATA II specification
Yes
a
There are no reviews yet.