Seagate ST39173LW SCSI Hard Drive

Capacity: 9GB
Spindle Speed: 7,200RPM
Interface Type: SCSI 68pin / HD68 Female
Disk Size: 3.5″x1.0″ (LFF Hard Drive)
Sustained Throughput (MBps): 
Average Seek Time (read/write ms): 7.4 / 8.2
Electrical Interface Speed: SCSI LVD U80 – 80MBps 16-bit
On-Board Cache: 1MB

FORMATTED CAPACITY (GB) __________________9.10 
ACTUATOR TYPE ____________________________ROTARY VOICE COIL
CYLINDERS ________________________________7,501 user
HEADS ______PHYSICAL______________________10
DISCS (3 in) _____________________________5
MEDIA TYPE _______________________________THIN FILM/MR
RECORDING METHOD _________________________PRML 8/9 PR4
INTERNAL TRANSFER RATE (mbits/sec)________152 to 231
EXTERNAL TRANSFER RATE (mbyte/sec) _______40 Sync
Low Voltage Differential(LVD) _______80 Sync
SPINDLE SPEED (RPM) ______________________7,200
AVERAGE LATENCY (mSEC) ___________________4.17
BUFFER (/optional)________________________1024/4096 KByte
Read Look-Ahead, Adaptive,
Multi-Segmented Cache
INTERFACE ________________________________Ultra2 SCSI

AVERAGE ACCESS (ms read/write)____________7.4/8.2
Drive level with controller overhead
SINGLE TRACK SEEK (ms read/write) ________1.1/1.4
MAX FULL SEEK (ms read/write) _________<__16/18
MTBF (power-on hours) ____________________1,000,000
SHOCK (G’s, 11/2 ms):
operating (Read/Write) __________2
abnormal ________________________10
nonoperating ____________________75/140
ACOUSTICS (Bels typical, sound power) ____4.4
POWER DISSIPATION (watts/BTUs) Active ____13.8/47
Idle ______11.2/38
POWER REQUIREMENTS: +12V START-UP (amps) _1.7
+12V TYPICAL (amps) __0.60 idle
+5V START-UP (amps) __0.96
+5V TYPICAL (amps) ___0.80 idle
IDLE (watts) _________12
LANDING ZONE (cyl) _______________________AUTO PARK
IBM AT DRIVE TYPE ________________________0 or NONE

Physical:
Height (inches/mm): 1.0/25.4
Width (inches/mm): 4.00/101.6
Depth (inches/mm): 5.75/146
Weight (lbs/kg): 1.3/0.589