Senal MXGN-18C 18″ Gooseneck Condenser Microphone with Integrated Base & Silent Touch Pad


999.00 د.إ

Key Features
  • Cardioid Back-Electret Condenser Capsule
  • Tailored for Clear & Intelligible Speech
  • For Lectures, Conferences & Meetings
  • 18″ Dual Gooseneck
  • Programmable Silent Touch Pad
  • LED Talk/Mute Indicator
  • 100 Hz Low-Cut Filter
  • Balanced XLR Output, Phantom Powered
  • Supports Interchangeable Capsules
  • Includes Windscreen

With a slim, unobtrusive profile, theĀ Senal MXGN-18CĀ is a 18″ gooseneck condenser microphone with an integrated base designed to provide clear and intelligible speech reproduction for lectures, video conferences, meetings, and more, without obscuring or visually distracting from the speaker. The back-electret condenser capsule features a cardioid polar pattern that clearly captures the voice in front of the mic, while reducing unwanted off-axis ambient sound often present in noisy and acoustically untreated rooms. It supports interchangeable omnidirectional and supercardioid capsules (available separately), which install and remove without tools in seconds.

The MXGN-18C’s shaft features upper and lower gooseneck sections that enable you to precisely position the capsule in front of the speaker for optimal sound. A low-cut filter attenuates rumble by 20 dB at 100 Hz, allowing crisp voice quality devoid of problematic bass tones. Effortlessly activate or mute the mic signal via the programmable silent touch pad on the integrated base. Talk/mute status is clearly indicated by the LED ring below the mic capsule.

The MXGN-18C is operated via 12 to 48 VDC phantom power, and utilizes a balanced XLR output to ensure noise-free signal transmission over long cable runs. The microphone’s rugged metal construction ensures long-lasting performance and dependability, even under demanding conditions. A slip-on foam windscreen is included to minimize pops, plosives, and breath noise.

Cardioid Mic Capsule

The back-electret condenser capsule offers high sensitivity compared to traditional dynamic designs, and requires less gain for a strong output level. Its cardioid polar pattern clearly captures the voice in front of the mic, while reducing unwanted off-axis sound and noise. Operated via 12 to 48 VDC phantom power, the MXGN-18C is compatible with a variety of mixers, mic preamps, PA systems, and audio interfaces.

Interchangeable Mic Capsules

Once positioned, leave the MXGN-18C in place and easily swap its cardioid capsule for the separately available omnidirectional or supercardioid capsules. No tools are necessary; they screw off/on in a matter of seconds.

Accurate Sound Reproduction

Tailored for accurate and intelligible voice reproduction, the MXGN-18C features a frequency response of 50 Hz to 18 kHz. A selectable low-cut filter attenuates 20 dB at 100 Hz to impede bass build-up and low-frequency rumble from HVAC systems.

Silent Touch Pad

Quickly and silently mute/open the mic signal by gently tapping the touch pad. Being programmable, it can operate in one of three modes to accommodate different preferences such as tap-to-talk, tap-to-mute, and more.

LED Ring Indicator

Just below the mic capsule, an LED ring indicator displays the talk/mute status of the MXGN-18C. Get a clear assessment of whether microphones are active or muted at a glance.

RF/EM Interference Rejection

Conference spaces and meeting rooms are common sources of Wi-Fi and cellular activity, noise from lights, and unintended radio-frequency paths. The MXGN-18C utilizes a balanced XLR output to inhibit such RF and EM interference over short and long cable runs.

Slip-On Windscreen

Slip on the supplied foam windscreen to reduce the inevitable vocal plosives from “P” and “B” sounds. Additionally, the windscreen guards the mic capsule against mouth-born moisture, which can corrode microphone components and degrade signal quality over time.

Dual Gooseneck Sections

Upper and lower gooseneck sections on the microphone shaft enable you to position the mic precisely in front of the subject.

Sturdy Construction

All-metal construction enables long-lasting performance and dependability; it won’t warp or crack under pressure or temperature-related stress.

Integrated Nonslip Padding

Thanks to the MXGN-18C’s nonslip padding, the microphone can remain stationary and stable on a table or podium.

Unobtrusive Appearance

The slim profile of the MXGN-18C doesn’t obscure or distract from the speaker, and its matte black finish won’t cause distracting reflections or glare.

Senal MXGN-18CĀ Specs

Microphone
Sound Field Mono
Operating Principle Pressure Gradient
Capsule Electret Condenser
Polar Pattern Cardioid
Circuitry Solid-State
Pad None
Tone Adjustment Low Cut:
-20 dB at 100 Hz
Performance
Frequency Range 50 Hz to 18 kHz
Maximum SPL 120 dB SPL
Impedance 100 Ohms
Sensitivity -38 dB
Connectivity
Output Connectors (Analog) 1 xĀ XLR 3-Pin
Power
Operating Voltage 12 to 48 V
Physical
Dimensions H: 1.3 x W: 3.4 x L: 5.6″ / H: 3.3 x W: 8.64 x L: 14.22Ā cm (Base)
L: 18″ / L: 45.72Ā cm (Gooseneck)
Weight 1.73Ā lb / 784.7Ā g
Packaging Info
Package Weight 2.76 lb
Box Dimensions (LxWxH) 21.5 x 5.75 x 3.75″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Senal MXGN-18C 18″ Gooseneck Condenser Microphone with Integrated Base & Silent Touch Pad”

There are no reviews yet.