AED2,799.00
TheĀ Sennheiser EW 100 G4-Ci1Ā is an easy-to-set-up rackmount wireless system that brings reliable high-quality, wireless sound to guitar and bass players performing in small to medium-sized venues including concert stages, houses-of-worship, theaters, and clubs.
The EW 100 G4-Ci1 features a true diversity, half-rack receiver housed in a rugged, full-metal chassis. The receiver’s auto-scan function searches a wide 46 MHz UHF tuning range with 1840 selectable frequencies available, seeking out a clean, interference-free channel for your audio transmission. The onboard guitar tuner is an added convenience for musicians.
This system includes a Ci 1 cable that connects your instrument to the lightweight bodypack transmitter. The transmitter provides up to 8 hours of operation on two AA batteries, with a fixed 30mW RF power output and a transmission range up to 330′. Up to 12 wireless channels can operate simultaneously in the same space, with the receivers linked together for fast, multi-channel frequency setup.
The EW 100 G4-Ci1 is backward-compatible with previous evolution systems. You can mix and match G4/G3/G2/G1 receivers or bodypack, handheld, and plug-on transmitters. It is also compatible with EW 300/500 systems.
The rugged, all-metal transmitter features a programmable mute function and can be locked out to prevent accidental changes during a performance. A backlit LCD displays essential information and provides fast menu access. The transmitter syncs to the receiver via infrared with a quick press on the Sync button.
The SK 100 G4 is powered via two AA batteries or a rechargeable BA 2015 Accupack battery (available separately). Side contacts allow for recharging the Accupack without removing it from the transmitterārequires the L 2015 quick-charging unit (available separately).
To prevent interference, the EM 100 receiver’s true-diversity reception compares incoming signals on two independent receiver circuits to ensure optimal RF quality. To ensure crystal clear audio, Sennheiser’s proprietary HDX compander technology maximizes the microphone’s signal-to-noise ratio, while avoiding RF noise.
The built-in equalizer enables you to change the frequency response of the output signal; you can reduce the bass range and boost the treble range. The receiver also offers an adjustable output level range of 48 dB to match the audio input of your mixing board or PA system.
The back panel houses a balanced XLR output as well as an unbalanced 1/4″ output. A kit is included for rackmount installation. The unit comes with a universal power supply and EU, US, UK, Korea, Australia, and China adapters.
ThisĀ Senal OLM-2 Lavalier MicrophoneĀ is a high-performance lavalier microphone with a locking 3.5mm connector for Sennheiser EW and Senal AWS-2000 wireless transmitters. Its miniature, lightweight design allows for discrete placement without compromising sound quality. This versatile workhorse microphone is ideal for broadcast, video, and stage applications.
Utilizing a broadcast-quality electret condenser element, it features a smooth frequency response and a wide dynamic range. Its omnidirectional polar pattern enables 360Ā° sound pickup, capturing a natural blend of voice and ambiance with low sensitivity to wind and handling noise, as well as to vocal plosives. In addition to being designed to connect to a Sennheiser or Senal bodypack transmitter, the OLM-2 can be combined with the Senal PS-48B Power Supply (sold separately) to operate on phantom or battery power, enabling it to plug into any XLR microphone input.
| Wireless Transmission | Analog UHF |
| Number of RF Channels | 1840 |
| Included Transmitters | 1 xĀ Bodypack |
| Diversity | True Diversity |
| RF Frequency Band | A1: 470 to 516 MHz |
| RF Bandwidth | 46 MHz |
| Frequency Step Size | 25 kHz |
| Max Operating Range | 330′ / 100.6Ā m (Line of Sight) |
| Max Systems per Setup | 20 |
| Deviation | Ā±24 kHz (Peak) |
| Modulation | Wideband FM |
| Form Factor | Tabletop |
| Mounting Options | Rackmount (with Included Hardware) |
| Rackmount Size | 1 RU (1/2 Rack) |
| Antenna | 2 xĀ Rod, Detachable (Rear-Mount) |
| Number of Audio Channels | 1 |
| Audio I/O | 1 xĀ XLR 3-Pin Male Balanced Output 1 xĀ 1/4″ TRS Female Unbalanced Output |
| Gain Range | 48 dB (3 dB Steps) |
| Audio Output Level | XLR Output: +18 dBu (Balanced) 1/4″ Output: +12 dBu (Unbalanced) |
| Network I/O | 2 xĀ RJ10 |
| Network Protocols | Manual IP |
| Approximate RF Sensitivity | 2.5 ĀµV |
| Squelch | Adjustable, 5 to 25 dBĪ¼V |
| Adjacent Channel Isolation | >65 dB |
| Power Requirements | AC/DC Power Adapter |
| AC/DC Power Adapter | 12 VDC at 300 mA (Included) |
| AC Input Power | 100 to 240 VAC, 50 / 60 Hz at 0.2 A |
| Display & Indicators | 1 xĀ Backlit LCD (AF Level, Channel, Frequency, Mute, RF Level, Transmitter Battery Status) |
| Housing | Metal |
| Operating Temperature | 14 to 131Ā°F / -10 to 55Ā°C |
| Dimensions | 8.3 x 1.7 x 7.5″ / 212 x 43 x 190Ā mm |
| Weight | 2.2Ā lb / 980Ā g |
| Form Factor | Bodypack |
| RF Output Power | 30 mW |
| Audio I/O | 1 xĀ 1/8″ / 3.5 mm TRS Female Input (Lockable) |
| Included Cable Connector | 1/4″ TS |
| Muting | Mute Switch |
| Audio Input Level | 3 V RMS |
| Gain Range | 60 dB (3 dB Steps) |
| Frequency Response | 80 Hz to 18 kHz (Mic) 25 Hz to 18 kHz (Line) |
| Sync Method | IR |
| Antenna | 1 xĀ Flexible Whip, Fixed (Beltpack) |
| Power Requirements | Battery |
| Battery Type | 2 xĀ AA (Included) 1 xĀ Sennheiser Accupack (Not Included, Replaceable) |
| Approx. Battery Life | 8 Hours (Alkaline) |
| Display & Indicators | 1 xĀ Backlit LCD (Audio Level, Battery Status, Channel, Group, Mute, Signal Strength) |
| Housing | Metal |
| Operating Temperature | 14 to 131Ā°F / -10 to 55Ā°C |
| Dimensions | 2.5 x 3.2 x 0.9″ / 64 x 82 x 24Ā mm |
| Weight | 5.6Ā oz / 160Ā g (with Batteries) |
| Package Weight | 5.99 lb |
| Box Dimensions (LxWxH) | 16.1 x 12.7 x 3.45″ |
| Transducer | Electret condenser |
| Polar Pattern | Omnidirectional |
| Frequency Response | 50 Hz to 20 kHz |
| Sensitivity | -63 dB Ā±3 dB (0 dB = 1 v/microbar @ 1 kHz) |
| Impedance | 15,000 Ī© Ā±30% @ 1 kHz |
| Operating Voltage | 1 – 10 VDC |
| Connector | Gold-plated 1/8″ (3.5 mm) locking connector jack |
| Cable Length | 5.3′ (1.6 m) |
| Head Diameter | 0.3″ (6.5 mm) |
| Head Length | 0.6″ (16.3 mm) |
| Total Weight | 1 oz (28.3 g) |
| Package Weight | 0.3 lb |
| Box Dimensions (LxWxH) | 10.4 x 4 x 1.25″ |
Belkin Network PCI Card 10/100 
Cisco SPA112 2 Port VoIP Telephone Adapter/ SIP ATA with 2-FXS/ VOIP Ports 
04 3550600
052 7036860
There are no reviews yet.