The Server TechnologyĀ® PRO2 Switched POPS PDU provides control of outlet power and local LED input current monitoring, allowing IT personnel to determine safe levels of loading on a per-phase basis while installing equipment into the rack/cabinet. The integral PIPSĀ® and POPSĀ® technology provides billing-grade accurate measurement of current, voltage, active power, apparent power, power factor, crest factor, and accumulated energy at the input and at each output. These power data points, along with temperature and humidity measurements (provided via optional probes), are accessible through the built-in Web and CLI interfaces as well as through SNMP. The PRO2 Switched POPS “Primary” PDU can be connected to as many as three (with optional module) PRO2 Switched POPS “Link” PDUs to extend the network access to the redundant or secondary power feed without the risks of a daisy chain linking configuration.
Power distribution unit
Server Technology Switched Master PRO2 Pops Pips, 2U, 24 Hdot Outlets (18XC13,6XCX), Input Amp Meters
- HDOT Cx Outlets
- Cx is the future-ready UL tested hybrid of a C13 and C19 outlet accommodating both C14 and C20 plugs.
- Network Monitoring
- Gain access to valuable data through connections including HTTP(S)
- Hot-Swap Network Card
- Network access is ensured when power is lost to the Primary unit with backup power provided by the Linked unit.
- Star Multi-Linking
- PRO2 provides the ability to link up to four power circuits using one IP address. Primary Expansion PDU provides backup power to network card.
- Temperature/Humidity Monitoring
- Primary and Expansion (select products) units each support two external 10′ (3m) T/H probes. Receive SNMP-based alerts and email notifications.
AED16,599.00
Category | Attribute | Value |
---|
General Information | Product Name | Switched Master PRO2 Pops Pips, 2U, 24 Hdot Outlets (18xC13, 6xCX), Input Amp Meters |
Product Series | PRO2 |
Product Model | C2WG24SN-YBLN5D6 |
Product Type | PDU |
Technical Information | PDU Type | Switched |
Phase | Three Phase |
Plug / Connector Type | NEMA L21-20P |
Receptacle Type | IEC 60320 C13, CX |
Receptacle Detail | 18 x IEC 60320 C13, 6 x CX |
Protection Type | Branch Circuit, Double Pole |
Circuit Protection | Yes |
Environmental Sensors | Temperature/Humidity |
Interfaces/Ports | Network (RJ-45) | Yes |
Power Description | Input Voltage | 230 V AC |
Output Voltage | 208 V AC |
Power Rating (Watt) | 5700 W |
Input Current | 20 A |
Physical Characteristics | Mount Type | Rack-mountable, Cabinet-mountable |
Form Factor | Hot-swappable |
Height | 3.5″ / 88.9 mm |
Width | 17.2″ / 436.88 mm |
Depth | 17.5″ / 444.5 mm |
There are no reviews yet.