04 3550600
052 7036860
Silicom PEG4I 4-Port Gigabit Ethernet PCI Express Server Adapter
AED1,999.00
Silicom’s Gigabit Ethernet PCI Express Server adapters are PCI-Express Server Adapters cards that contain Multiple / Single Gigabit ports/ on a PCI-Express adapter.
Silicom’s Gigabit Ethernet PCI Express Server adapters are designed for Servers and high-end appliances. The performance is optimized so that system I/O is not the bottleneck in high-performance networking applications.
Silicom’s Gigabit Ethernet PCI Express Server adapters enable fault-tolerant via teaming. Traffic from the failed port is routed through other members of the team.
Silicom’s Gigabit Ethernet PCI-Express Server adapters have an integrated hardware acceleration that performs TCP/UDP/IP checksum offload and TCP segmentation. The host processing offloads accelerators frees CPU for application processing.
Silicom’s Gigabit Ethernet PCI-Express Server adapters are the ideal solution for implementing multiple network segments, mission-critical high-powered networking applications and environments within high performance servers.
Copper Gigabit Ethernet (1000Base-T) Adapters:
• Independently copper Gigabit Ethernet channels support six, four, two and one Gigabit Ethernet (1000Base-T), Fast Ethernet (100Base-Tx) and Ethernet (10Base-T).
• Triple speed 1000Mbps (1000Base-T), 100 Mbps (100Base-Tx) and 10 Mbps (100Base-T) operation.
• Nway auto negotiation automatic sensing and switching between 1Gbps full duplex and 100 / 10 Mbps operations Simplex or Full Duplex.
• RJ-45 female connectors.
Common Key features:
• Host Interface:
• Host Interface standard support:
• PCI-Express Base Specification Revision 1.0a.
• High performance, reliability, and low power use in advanced Intel integrated MAC + PHY / SERDES chip Controllers.
• Ultra deep, packet buffer per channel lowers CPU utilization, avoids PCI-Express congestion
• Hardware acceleration that can offload tasks from the host processor. The Controllers can offload TCP/UDP/IP checksum calculations and TCP segmentation.
• Server class reliability, availability and performance features:
• Link Aggregation and Load Balancing
Switch dependent: 802.3ad (LACP), Generic Trunking ( GEC / FEC)
• Switch and NIC Independent.
• Failover
• Priority queuing – 802.1p layer 2 priority encoding.
• Virtual LANs –802.1q VLAN tagging.
• Jumbo Frame (16KB).
• 802.x flow control.
• Statistics for SNMP MIB II, Ethernet like MIB, and Ethernet MIB (802.3z, Clause 30)
• LEDs indicators for link/Activity/Speed status.
| IEEE Standard / Network topology: | Gigabit Ethernet, 1000Base-T Fast Ethernet, 100Base-TX Ethernet, 10Base-T |
| Full duplex / Simplex | Support both Simplex & Full duplex operation in all operating speeds |
| Auto negotiation: | Auto-negotiation between Full duplex and simplex operations and between 10Mb/s 100Mb/s speeds and duplex 1000Mb/s. |
| Data Transfer Rate: | 1000 Mbit/s, 100 Mbit/s and 10 Mbits/sec in simplex mode per port. 2000Mbit/s 200 and 20 Mbit/s in full duplex mode per port. |
| Cables and Operating distance: | 10Base-T Category 3, 4, or 5 maximum 50m * 100Base-Tx Category 5 maximum 50m * 1000Base-T Category 5E maximum 50m * *Theoretical Distance – Defined as half a distance as stated by the IEEE 802.3 standard |
Operating Systems Support (all adapters):
| Operating system support: | Windows.NET Windows 2000 Windows NT Windows98 / WindowsXP Netware Linux FreeBSD Unix: SCO Open Server UnixWare / OpenUnix 8 Solaris |
PXG4U
PXG4U: General Technical Specifications
| Interface Standard: |
PCI v2.2 32/64 bit, 33/66Mhz PCI-X v1.0 32/64-bit, 66/100/133MHz |
| Board Size: | PCI Short add in card 168mm x 107mm (6.6”x4.2”) detailed information: Appendix A.2 |
| PCI Card Type: | Universal 64 bit Card |
| PCI Connector: | Universal 64 bit |
| PCI Voltage: | +5V (Min 4.75V, Max, 5.25V) and +3.3V (Min 3.0V, Max. 3.6V) |
| Holder: | Metal Bracket |
| Weight: | 140 gram (4.94 oz) |
| Power Consumption: | 0.4A at 5V and 2A at 3.3V: Typical, all ports operate at 1000Mbit/s. 0.4A at 5V and 1A at 3.3V: Typical, all ports operate at 100Mbit/s. 0.4A at 5V and 1A at 3.3V: Typical, all ports operate at 10Mbit/s. 0.3A at 5V and 0.9A at 3.3V: Typical, No Link – operate at 10Mbit/s |
| Operating Temperature: | 0°C-50°C (32°F-122°F) |
| Storage Temperature: | -20°C-65°C (-4°F-149°F) |
| EMC Certifications: | FCC Part 15, Subpart B Class B Conducted Emissions Radiated Emissions CE EN 55022: 1998 Class B Conducted Emissions Radiated Emissions CE EN 55024: 1998 Immunity for ITE Amendment A1: 2001 CE EN 61000-3-2 2000 Harmonic Current Emissions CE EN 61000 3-3 Voltage Fluctuations and Flicker CE IEC 6100-4-2: 1995 ESD Air Discharge 8kV. Contact Discharge 4kV. CE IEC 6100-4-3:1995 Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz CE IEC 6100-4-4:1995 EFT/B: Immunity to electrical fast transients 1kV Power Leads, 0.5Kv Signals Leads CE IEC 6100-4-5:1995 Immunity to conductive surges COM Mode; 2kV, Dif. Mode 1kV CE IEC 6100-4-6:1996 Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M. By 1kHz CE IEC 6100-4-11:1994 Voltage Dips and Short Interruptions V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per CISPR 22; 1997 Amendment A1: 2000 Amendment A2: 2002 VCCI: 2004, Class B |
| MTBF*: | 114 (Years) *According to Telcordia SR-332 Issue 1 Environmental condition – GB (Ground, Fixed, Controlled). Ambient temperature – 25?°C. Temperature rise of 10?C above the system ambient temperature was assumed for the cards components. |
PXG4U: LED / Connector Specifications
| LEDs: | (3) LEDs per port Link Activity: Turns on any link speed, blinks on activity (green). 100Mbits/s: Turns on 100 Mbit/s link (green). 1000Mbit/s: Turns on 1000 Mbit/s link (green). |
| LEDs location | LEDs are located on the PCB, visible via holes in the metal bracket holder |
| Connectors: | (4) Shielded RJ-45 |
Order Information:
| P/N | Description | Note |
| PXG4U-RoHS | Quad Port Copper Gigabit Ethernet PCI-X Server Adapter | RoHS compliant |
| PXG4U | Quad Port Copper Gigabit Ethernet PCI-X Server Adapter |
There are no reviews yet.