SMC EliteConnect Wireless Power Injector – 2 port UTP

The SMCPWR-INJ3 is an IEEE802.3af compliant PoE (Power over Ethernet) 1-port injector that combines power and data signals. By using the SMCPWR-INJ3, an external power adapter will no longer be required. Utilizing a standard Category 5 Ethernet RJ-45 cable, the power and data can be combined (injected) into the Ethernet RJ45 Cat.5 output cable and fed into the PoE enabled devices such as SMC2552W-G2, SMC2555W-AG2, or SMCWHSG14-G access points/hotspot gateway or SMCAMP-1000G 1-watt amplifier to provide both power and data signals. It will reduce your network installation costs and increase the flexibility, especially in locations where electrical power sources are difficult to get.

 

FEATURES

IEEE802.11b compliant:IEEE802.11b compliance allows for seamless interoperation among multiple vendors

Flexible access point and bridging functionalities:Connects two separated LANs (usually located in different buildings) without needing expensive cabling or leased lines

Flexible management features:Flexible network management through CLI, Web, Telnet, TFTP,SNMP make it simple and easy to monitor, troubleshoot, and view event logging

Detachable antennas :Optional use of 2.4GHz High Gain Antenna for extended range and coverage

Enterprise level of authentication and encryption security:Enterprise class security features including the new WPA, up to128-bit WEP encryption, 802.1x authentication and dynamic key management, wireless client isolation, disabled SSID broadcast

Power over Ethernet support (optional):Reduces installation cost by using standard Cat. 5 cable to  provide power to the Access Point.

 

TECHNICAL SPECIFICATIONS

STANDARDS

• IEEE802.11b, IEEE802.1x,

• IEEE802.3, IEEE802.3u, IEEE802.3af

INTERFACE

• 1x 10BASE-T/100BASE-TX  (RJ-45) Port

• 1x RS-232c Serial Port

• IEEE802.11b Wireless LAN

MEDIA ACCESS PROTOCOL

• CSMA/CA

OPERATIONAL MODE

• Infrastructure Mode

• Access Point/WDS Bridge (used in pure

SMC2582W-B bridging environment)

• Bridge Master/Slave (used when

SMC2586W-G, SMC2582W-B, and

SMC2682W are in the bridging environment)

TRANSFER DATA RATES

• 11, 5.5, 2, 1 Mbps with auto-Fallback

MODULATION TYPE

• IEEE802.11b: DSSS

Modulation Data Rate

DBPSK 1 Mbps

DQPSK 2 Mbps

CCK 5.5, 11 Mbps

CHANNELS/FREQUENCY RANGE

• 2.4 GHz frequency band

• 11 channels, 2.400 ~ 2.4720 GHz

(US, Canada)

• 13 channels, 2.400 ~ 2.4835 GHz (ETSI)

• 14 channels, 2.400 ~ 2.4970 GHz (Japan)

TRANSMIT OUTPUT POWER (E.I.R.P.)

Transmit Power Control IEEE802.11b

High 16-18 dBm

Medium High 13-15 dBm

Medium 10-12 dBm

Medium Low 7-9 dBm

Low 4-6 dBm

RECEIVE SENSITIVITY

Transfer Rate IEEE802.11b

1 Mbps -91 dBm

2 Mbps -88 dBm

5.5 Mbps -85 dBm

11 Mbps -83 dBm

ANTENNA TYPE

• One removable, replaceable 2 dBi Antenna

• R-SMA (male) connector for external

Antenna

OPERATING RANGE

• 802.11b: up to 457m/ 1.500 ft

• Ranges vary based upon numerous

environmental factors so individual

performance may be significantly different.

SECURITY

• 64-/128-bit WEP encryption

• TKIP encryption

• Wi-Fi Protected Access (WPA)

• IEEE802.1x, EAP-MD5, EAP-TLS,

EAP-TTLS, PEAP, LEAP

• Disable SSID Broadcast

• MAC address filtering

• Wireless Client Isolation

CONFIGURATION AND MANAGEMENT

• Web-browser, Telnet, TFTP, SNMP

• Syslog, Event Logging

• DHCP Server

MAXIMUM CLIENTS

• 64

LED

• Power, LAN, WLAN, Alive

TEMPERATURE

• Operating: 0°C ~ 55°C / 32°F ~ 131°F

• Storage: -20°C ~ 70°C / -4°F ~ 158°F

HUMIDITY (NON-CONDENSING)

• 5% ~ 95% in storage

DIMENSION  (WITHOUT ANTENNAS)

• 172 x 140 x 32 mm / 6.75 x 5.5 x 1.25 in

WEIGHT

• 363 g/ 0.80 lbs

COMPLIANCE

• Wi-Fi compliant

• FCC Part 15 Class B

• IC (Canada)

• ETSI, EN300328-1/ EN300328-2/

EN60950/EN301489-1/-17 (Europe)

WARRANTY

• Limited Lifetime

SMCPWR-INJ3 (optional)

INPUT POWER REQUIREMENTS

• AC Input Voltage: 90 – 264VAC, 47-63 Hz

• AC Input Current: 2A at 100VAC, 1A at

240VAC (-48VDC)

OUTPUT VOLTAGE

• Aggregate Power: 50W (48VDC)

PoE OUTPUT SPECIFICATION

• PIN Assignments and Polarity:

(+) 4/5, (-) 7/8

LEDs

• AC Power, Power Active, Over Current

Protection, Connectors Shielded RJ-45

TEMPERATURE

• Operating: 0°C ~ 40°C / 32°F ~ 104°F

• Storage: -25°C ~ 85°C / -13°F ~ 185°F

HUMIDITY (NON-CONDENSING)

• Max. 90% in storage

DIMENSION

• 101 x 140 x 38 mm/ 4 x 5.5 x 1.5 in

WEIGHT

• 626 g / 1.38 lbs

COMPLIANCE

• FCC Part 15 Class B

• CE

• UL1950

• CSA A22.2 No. 950

• EN60950

• CB