Specifications |
Model Number |
6026T-NTR+ |
Motherboard |
Super X8DTN+ |
Processor/Cache |
CPU |
- Dual 1366-pin LGA Sockets
- Supports up to two IntelĀ® 64-bit XeonĀ® processor(s) of the same type below:
IntelĀ® XeonĀ® Processor X5600/E5600/L5600 Series (Westmere) 40W – 130W
IntelĀ® XeonĀ® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W – 95W
|
QPI |
up to 6.4 GT/s |
System Memory |
Memory Capacity |
- 18x 240-pin DIMM slots
- Supports up to 288GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
- Supports up to 48GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
- Memory Mirroring supported
|
Memory Type |
1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes |
1GB, 2GB, 4GB , 8GB , 16GB |
Memory Voltage |
1.5 V / 1.35V |
Error Detection |
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports IntelĀ® x4 and x8 Single Device Data Correction (SDDC)
|
On-Board Devices |
Chipset |
- IntelĀ® 5520 (Tylersburg) chipset
- ICH10R + IOH-36D
|
SATA |
- Intel ICH10R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
|
IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIMLP)
- Optional: AOC-SIMLP-B(+)
- Optional: AOC-SIMLP-3(+) with 3rd LAN support
|
Network Controllers |
- IntelĀ® 82576 Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- IntelĀ® I/OAT 3 support for fast, scaleable, and reliable networking
- VMDq support for better performance of virtualization
|
Graphics |
ATI ES1000 controller with 32 MB of video memory |
Super I/O |
Winbond 83627HF chip |
Expansion Slots |
PCI-Express |
- 2 (x8) PCI-E slots (1 in x16 slot)
- 1 (x4) PCI-E slot (in x8 slot)
|
PCI-X |
- 1x 64-bit 133MHz PCI-X (3.3V) slots
- 2x 64-bit 133/100MHz PCI-X (3.3V) slots
|
UIO |
1 UIO slot (PCI-E 2.0 x8 slot) |
Input / Output |
Serial ATA |
- Six Serial ATA ports
- Six SATA hard drives supported
|
IDE |
- Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
Floppy |
1 Floppy controller; 1.44 MB |
LAN |
2x RJ45 LAN ports |
USB |
- 2x USB rear ports
- 2x USB on-board
- 2x USB internal headers( 3 ports)
- 7 total USB ports, 2.0 Compliant
|
VGA |
1x VGA Port |
Keyboard / Mouse |
PS/2 keyboard and mouse ports |
Serial Port / Header |
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header (Option)
|
Chassis |
Form Factor |
2U Rackmount |
Dimensions |
Height |
3.5″ (89mm) |
Width |
17.2″ (437mm) |
Depth |
25.5″ (648mm) |
Gross Weight |
55 lbs (24.9kg) |
Available Colors |
Black |
Front Panel |
Buttons |
- Power On/Off button
- System Reset button
|
LEDs |
- Power LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat / Fan Fail LED
- Power fail LED
|
Ports |
2x USB Ports |
Drive Bays |
Hot-swap |
- 8x 3.5″SATA Hot-swap drive trays
- Supports up to 6x SATA hard drives
|
Peripheral Drives |
DVD-ROM |
Slim 8x DVD, 24x CD, DVD-ROM Drive |
Backplane |
SAS / SATA |
1x 2U SAS / SATA backplane |
System Cooling |
Fans |
3x 80mm 6300 RPM fans |
Shroud |
1x Air Shroud |
Power Supply with Power Distributor |
Power Supply |
720W (1+1) Redundant high-efficiency power supply with PMBus |
AC Input |
100-240 V, 50-60 Hz, 4-9 Amp |
DC Output |
- 3 Amp @ +5V standby
- 59 Amp @ +12V
|
With Power Distributor |
- +5V: 30 Amp
- +3.3V: 24 Amp
- -12V: 0.6 Amp
|
System BIOS |
BIOS Type |
32Mb SPI Flash EEPROM with AMIĀ® BIOS |
BIOS Features |
- Plug and Play (PnP)
- PCI 2.2
- ACPI up to 3.0
- USB Keyboard support
|
PC Health Monitoring |
CPU |
- Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT Voltages.
- 5-Phase-switching voltage regulator
|
FAN |
- Total of eight fan headers supporting up to 8 fans
- Eight 4-pin fan headers
- 8x fans with tachometer status monitoring
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
|
Temperature |
- Monitoring for CPU and chassis environment
- Thermal Control for 8x fan connectors
- PECI
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
Operating Environment / Compliance |
RoHS |
RoHS Compliant |
Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
There are no reviews yet.