04 3550600 052 7036860

Toa Electronics VM-3240E 240W Extension Amplifier (3 RU)

Add to Wishlist
Key Features
  • For Use with VM-3000 Voice Alarm System
  • 85 dB S/N Ratio
  • Up to Six Paging Zones

د.إ16,699.00

Add to Wishlist

The VM-3240E from Toa Electronics is a 240W extension amplifier for use with the VM-3000 Voice Alarm System. It can be mounted in a 3 RU EIA-Standard equipment rack. The extension amplifier receives audio and control signals from the VM-3240VA through the VM buss. One local analog audio input is available. Up to six paging zones may be assigned to each amplifier. The VM-3240E is fully compliant with NFPA72 requirements when used with VM-3240VA AMQ and is listed to UL2572, ULC-S576, and UL864 for Mass Notification and Fire Voice applications.

SKU: VM-3240E AMQ Category: Tag:
Frequency Response
50 Hz – 20 kHz, ±3 dB (1/3 rated output)
800 Hz – 2.8 kHz (UL2572)
400 Hz – 4 kHz (CAN/ULC-S576)
Distortion
0.7% or less (at rated output, 1 kHz)
S/N Ratio
85 dB or more
Inputs
External Amplifier Input: 70 V line, removable terminal block (14 pins)
Local Input: -50 dB (MIC) / -10 dB (LINE) (changeable), 600 Ohms, electronically balanced, removable terminal block (14 pins)
Outputs
Speaker Output 1 – 2: Max 240 W per output
Speaker Output 3 – 6: Max 100 W per output
Speaker Output 1 – 6: Total within rated output, removable terminal block (14 pins)
Recommended Minimum Load: 245 Ohms (20 W) at 70 V for speaker line failure detection
Direct Output: Direct output from internal or external amplifier, removable terminal block (16 pins)
VM-Link Connectors
Input: RJ45 female, for VM-3240VA
Output: RJ45 female for VM-3240E
Link Cable: Category 5 shielded twisted-pair straight cable (Cat5-STP)
Control
General Control
Input 1 – 8: No-voltage make contact input, open voltage: 24 VDC
Short-Circuit Current: 2 mA or less, removable terminal block (14 pins)
Output 1 – 8: Isolated open collector output, withstand voltage: 30 VDC
Operating Current: 10 mA or less, removable terminal block (14 pins)

Emergency Control
Input 1 – 5: No-voltage make contact input, open voltage: 24 VDC
Short-Circuit Current: 2 mA or less, RJ45 female connector
Input 6: Isolated voltage input, Inactive: -24 V, ±20%
Active: +24 V, ±20%, RJ45 female connector
Status Output: Relay contact output, withstand voltage: 40 VDC
Operating Current: 2 – 300 mA, RJ45 female connector
Power Input/Output
Power Input: From VX-2000DS only (operating range: 20 – 40 VDC)
PS Output: 28 VDC / 18 A
M4 screw terminal, distance between barriers: 11 mm
Power Source
120 VAC, 60 Hz
Power Consumption
690 VA (at rated output), 260 W (UL60065), 63 W (no signal)
Rated Output Power
240 W, 21 Ohms (UL60065)
200 W, 25 Ohms (UL2572)
200 W, 25 Ohms (CAN/ULC-S576 with separate UPS)
100 W, 50 Ohms (CAN/ULC-S576)
Total amplifier output (1 – 6 and Direct Output)
DC Output
22 VDC special application, maximum current 0.3 A (for RM-200M only)
Link
DS Link: To local VX-2000DS, RJ45 female connector
Link Cable: Category 5 shielded twisted-pair straight cable (CAT5-STP)
Operating temperature
32 to 120°F (0 to 49°C)
Operating Humidity
5-95% RH (no condensation)
Finish
Panel: Aluminum, hair-line, black
Case: Surface-treated steel plate, black paint
Compliance
UL2572 and UL1480UUMW
Dimensions
18.98 x 5.22 x 16.02″ (48.2 x 13.3 x 40.7 cm)
Weight
36.38 lb (16.5 kg)

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Toa Electronics VM-3240E 240W Extension Amplifier (3 RU)”

There are no reviews yet.