04 3550600 052 7036860

Tripp Lite BC600SINE 600VA Standby UPS Tower Battery Backup

Add to Wishlist

Interface Types: IEC 5-15P

Bays/Ports/Slots: 6

U Height: 2U

Wattage/VA: 375W

Voltage: 110-120V

1,499.00 د.إ

Add to Wishlist

Tripp Lite PC Personal BC600SINE 120V 600VA 375W Standby UPS Tower Battery Backup – Brand New

Tripp Lite PC Personal BC600SINE 120V / 120 Volts 600VA / 600 Volt-Amps 375W / 375 Watts Standby UPS / Uninterruptible Power Supply Tower Battery Backup with 6 USB Ports (3 UPS Battery Backup Outlets and 3 Additional Surge-Only Outlets) – Brand New

PC Personal 120V 600VA 375W Standby UPS with Pure Sine Wave Output, Tower, 6 Outlets

  • 600VA tower 120V standby UPS with SINE WAVE output
  • Maintains AC output during power failures
  • 3 UPS battery supported outlets, 3 surge-only outlets
  • USB port, Active PFC power supply compatible, 97% efficient
  • NEMA 5-15P input plug and 6 NEMA 5-15R outlets
  • 3-year limited warranty
  • $150,000 Ultimate Lifetime Insurance

 

Overview
Tripp Lite’s BC600SINE UPS system provides long-lasting battery backup for professional workstations, PCs, networking equipment and other sensitive electronics. Sine wave output in both line and battery power modes provides compatibility with all electronic loads, including PC and Mac systems fitted with Active Power Factor Corrected (PFC) power supplies. Uninterruptible Power Supply switches to battery derived sine wave AC output during power failures and severe voltage fluctuations so that connected equipment can be operated normally and shut down without data loss. Provides 18 minutes battery runtime with a typical desktop computer system (100 watts). Includes 3 battery-supported outlets for computer, monitor and one vital system peripheral, plus 3 additional surge suppression-only outlets for printers and other system accessories not requiring battery support. Built-in USB port enables data-saving unattended shutdown when used with Tripp Lite’s PowerAlert software, available via FREE download from www.tripplite.com/poweralert. USB port also enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Built-in audible alarm and 4 front-panel LEDs indicate line power status, battery power status, overload status and battery low/replace status. 650VA/375W power handling ability supports professional workstations, desktop PCs, point-of-sale equipment, small business phone systems, audio/video equipment and home theater systems. Supports user battery replacement via built-in access panel.

 

Features

  • Tripp Lite’s BC600SINE tower, sine wave UPS system provides long-lasting battery backup for a variety of computer and electronic applications
  • Sine wave output in both line and battery modes provides compatibility with all electronic loads, including PC and Mac systems fitted with Active Power Factor Corrected (PFC) power supplies
  • BC600SINE UPS system switches to battery derived sine wave AC output during power failures and severe voltage fluctuations with enough time to shut down without data loss
  • 650VA / 375 watt UPS capacity with 3.3 minutes runtime at 100% load and 11.1 minutes at 50% load
  • Provides 18 minutes battery runtime with a typical desktop computer system consuming 100 watts
  • Includes 3 battery-supported outlets for computer, monitor and one vital system peripheral, plus 3 additional surge suppression-only outlets for printers and other system accessories not requiring battery support
  • Built-in USB port enables data-saving unattended shutdown when used with Tripp Lite’s PowerAlert software, available via FREE download from www.tripplite.com/poweralert.
  • HID-compliant USB port enables integration with built-in power management and auto-shutdown of Windows and Mac OS X
  • PowerAlert software CD included
  • Built-in audible alarm with cancel switch warns of power failure conditions; once silenced, alarm will re-sound as batteries approach full discharge
  • Alarm can be permanently silenced via PowerAlert interface
  • 4 front panel LEDs indicate line power status, battery power status, overload status and battery low/replace status
  • Supports user hot-swappable battery replacement via built-in access panel
  • Optional PDUB15 bypass PDU enable hot-swappable UPS replacement with no disruption to connected equipment
  • $150,000 Ultimate Lifetime Insurance (U.S., Canada, and Puerto Rico only)

 

Package Includes

  • BC600SINE UPS System
  • USB Cable
  • Owner’s manual
SKU: BC600SINE Category:
TRIPP LITE UPS BATTERY BACKUP
Model Number BC600SINE
OVERVIEW
UPS Type Standby
OUTPUT
Output Volt Amp Capacity (VA) 600
Output Watt Capacity (Watts) 375
Nominal Voltage Details 120v nominal output in battery mode
Frequency Compatibility 60 Hz
Output Voltage Regulation (Battery Mode) +/-5%)
UPS Output Receptacles (Surge Suppression Only) 3 UPS outlets, 3 surge-only outlets
Hot-Swap PDU options PDUB15 (2U / 8 5-15R outlets)
Output AC Waveform (AC Mode) Sine wave
Output AC Waveform (Battery Mode) Pure sine wave
Nominal Output Voltage(s) Supported
  • 110V
  • 115V
  • 120V
Output Receptacles (6) 5-15R
Individually Controllable Load Banks

Select UPS models have their receptacles divided into one or more load banks (labeled LOAD 1, ect.) which may be remotely switched OFF and ON using Tripp Lite UPS software without interrupting power to equipment connected to the other outlets

 No
INPUT
Rated input current (Maximum Load) 10A Max (UPS and surge-only loads combined)
Nominal Input Voltage(s) Supported 120V AC
UPS Input Connection Type
  • 5-15P
  • Right-Angled
UPS Input Cord Length (ft.) 6
Recommended Electrical Service 15A 120V
Input Phase Single-Phase
BATTERY
Full Load Runtime (min.)

The amount of runtime th UPS will offer when you

 3.3 min. (375 watts)
Half Load Runtime (min.)

The amount of runtime th UPS will offer when you

 11.1 min. (190 watts)
DC System Voltage (VDC) 12
Battery Recharge Rate (Included Batteries) Less than 9 hours from 10% to 90%
Internal UPS Replacement Battery Cartridge RBC51
Battery Access Battery access door
Battery Replacement Description Hot-swappable, user replaceable batteries
Expandable Runtime No
USER INTERFACE, ALERTS & CONTROLS
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation
Alarm Cancel Operation
  • Power-fail alarm can be silenced during a power failure using alarm-cancel switch
  • alarm can be permanently disabled via PowerAlert software interface
Audible Alarm Audible alarm indicates power failure and overload conditions
LED Indicators
  • LINE POWER (green)
  • INVERTER MODE (yellow)
  • OVERLOAD (red)
  • REPLACE BATTERY (red)
SURGE / NOISE SUPPRESSION
UPS AC Suppression Joule Rating 252
UPS AC Suppression Response Time Instantaneous
EMI / RFI AC Noise Suppression

Technology found in select UPS systems that protects against EMI (electromagnetic interference) and RFI (radio frequency interference) line noise and protects equipment against associated incremental hardware damage, data corruption and audio/video transmission problems.

 Yes
PHYSICAL
Cooling Method Fan
Installation Form Factors Supported with Included Accessories Tower
Primary Form Factor Tower
Primary UPS Depth (mm) 191
Primary UPS Height (mm) 273
Primary UPS Width (mm) 133
Shipping Dimensions (hwd / in.) 13.90 x 8.10 x 10.30
Shipping Weight (lbs.) 16.90
UPS Housing Material PVC
UPS Power Module Dimensions (hwd, in.) 10.75 x 5.25 x 7.5
UPS Power Module Weight (kg) 6.62
UPS Power Module Weight (lbs.) 14.6
ENVIRONMENTAL
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius.
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius.
Relative Humidity Up to 90%, non-condensing
AC Mode BTU / Hr. (Full Load)

The amount of heat a UPS generates when operating under a full load on mains (AC) power. Measured in British Thermal Units (BTU).

 33
AC Mode Efficiency Rating (100% Load) >97%
COMMUNICATIONS
Communications Interface USB (HID enabled)
PowerAlert Software For local monitoring via the UPS’s built-in USB communications port, download PowerAlert Local software at http://www.tripplite.com/poweralert
Communications Cable USB interface cable included
Network UPS Tools Compatibility NUT compatible. See the full list of Tripp Lite NUT compatible UPS systems at http://www.networkupstools.org/stable-hcl.html?manufacturer=Tripp Lite
LINE / BATTERY TRANSFER
Transfer Time

The time it takes for a UPS to switch from AC on-line mode to DC battery-powered mode. Measured in milliseconds (ms)

 Battery to line mode: 2 milliseconds / Line to battery mode: 5 milliseconds
Low Voltage Transfer to Battery Power (Setpoint) 99V
High Voltage Transfer to Battery Power (Setpoint) 139V
SPECIAL FEATURES
Cold Start (Startup in Battery Mode During a Power Failure) Cold-start operation supported
High Availability UPS Features Hot swappable batteries
Green Energy-Saving Features Greater than 95% efficiency – GREEN UPS
CERTIFICATIONS
UPS Certifications
  • Tested to UL1778 (USA)
  • Tested to CSA (Canada)
  • Tested to NOM (Mexico)
  • Meets FCC Part 15 Category B (EMI)
  • ROHS (Restriction of Hazardous Substances)
WARRANTY
Product Warranty Period (U.S. & Canada) 3-year limited warranty
Connected Equipment Insurance (U.S., Canada & Puerto Rico) $150,000 Ultimate Lifetime Insurance

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Tripp Lite BC600SINE 600VA Standby UPS Tower Battery Backup”

There are no reviews yet.

Related products