04 3550600 052 7036860

Vaddio RoboSHOT 20 UHD OneLINK HDMI System (White)

Add to Wishlist

د.إ31,799.00

Add to Wishlist

The RoboSHOT 20 UHD OneLINK HDMI System from Vaddio combines a white RoboSHOT 20 UHD PTZ camera and OneLINK HDMI interface. It is suitable for use in distance learning and corporate environments. The system captures 3840 x 2160 video at 30p from a single 1/2.3″-type Exmor sensor and transmits it up to 328′ over CAT5e/6 cable. The combination enables powering the camera, sending control signals, and transmitting video over a single Ethernet cable.

The PTZ camera features a 20x total zoom range with 74° angle of view at wide, with a 4.8° angle of view at maximum zoom in. The OneLINK features an HDMI video output as well as bidirectional RS-232 and Ethernet ports.

Vaddio RoboSHOT 20 UHD Ultra High Definition PTZ Camera (White)

This white RoboSHOT 20 UHD Ultra High Definition PTZ Camera from Vaddio is suitable for use in distance learning, corporate and house of worship. It captures UHD 4K (3840 x 2160) at 30p from a single 1/2.3″-type Exmor R sensor. Featuring a 12x optical zoom, with a 1.67x digital zoom for a 20x total zoom range, the camera has a 74° angle of view at wide, with a 4.8° angle of view when zoomed in all the way.

The camera simultaneously outputs HDMI, HDBaseT, 3G-SDI, and IP streaming, so there is no concern about selecting an output port. You can control the camera from a networked computer via the Ethernet port, and an included IR remote provides local control. You can tell at a glance the status of the unit thanks to a built-in LED that changes color to indicate the state of the camera.

The camera’s outputs are active at all times, so there is no need to select one output over another. This also allows you to output to more than one display device or recorder at the same time. The built-in IP streaming simplifies streaming your video over a network.
HDBaseT provides power over an Ethernet cable, so you are not limited where you can mount the camera by needing an AC outlet. You can mount this camera wherever you can run an Ethernet cable. Please note that you will need a network that supports HDBaseT to take advantage of this feature.
You can control the camera via the included IR remote commander, the RS-232 port, or the HDBaseT port.
The camera features built-in web based interface for control via your browser.

Status Indicator LED

  • Purple – Boot-up and Standby modes.
  • Blue – Normal operation and is a power on, ready condition.
  • Blinking blue – The camera has received IR from the remote or other IR source.
  • Red – Tally function; shows that the camera is on-air.
  • Blinking red – Fault condition.
  • Yellow – Firmware update is in progress.

Vaddio OneLINK HDMI Extension System for HDBaseT Cameras

The Vaddio OneLINK HDMI Extension System for HDBaseT Cameras is an interface that allows you to power, receive HDMI video from, and control your compatible HDBT camera using a single Ethernet cable up to 328′ long. The interface connects to your network for control, or you can use an RS-232 controller (not included) instead. HDMI video, up to 1080p60, is transmitted from your HDBT compatible camera to the OneLINK interface, from where it is available over a standard HDMI port.

  • Video, power, network, and control on a single Cat5e (or better) cable
  • Supports cable runs up to 328′
  • Works with RoboSHOT UHD HDBaseT cameras
  • Bidirectional control via Ethernet and RS-232
  • Transmits and receives HDMI video up to 1080p60
Key Features
  • 3840 x 2160 UHD Resolution
  • Single 1/2.3″ Exmor Sensor
  • 20x Total Zoom
  • Video, Power, Network, and Control
  • Supports Cable Runs up to 328′
  • Bidirectional Ethernet and RS-232
SKU: 999-9950-100W Category: Tag:
Weight 2.7 kg

Vaddio RoboSHOT 20 UHD Ultra High Definition PTZ Camera (White) Specs

Camera
Sync System Internal
Sensor 1/2.3″-type Exmor R CMOS
Pixels Total: 9.03 MP
Effective: 8.93
Minimum Illumination Color: 3.0 lx (F1.8, 50IRE)
Zoom Optical: 12x
Digital: 1.67x
Combined: 20x
Horizontal Field-of-View Wide: 74°
Tele: 4.8°
Focusing Auto Focus
Manual Focus Mode
One-Push Trigger Mode
Minimum Focus Distance Wide: 0.4″ / 10 mm
Tele: 59.1″ / 1500 mm
White Balance Auto
ATW
Indoor
Outdoor
One-Push
Manual
Aperture/Detail 16 Steps
Gain Auto / Manual (0 to 33 dB)
Backlight Compensation On/Off
Noise Reduction 6 Steps
S/N Ratio Over 50 dB
Output Protocols
HDMI
HDBT
HD-SDI
IP (H.264)

Aspect Ratio HDMI: 16:9 (all resolutions)
IP (H.264) Streaming: 16:9, 3:2, 4:3

HDMI Resolutions/Frame Rates
3840 x 2160: 30/25 fps
1080p: 59.94/50/29.97/25
1080i: 59.94/50
720p: 59.94/50

3G-SDI
1080p: 59.94/50/29.97/25
1080i: 59.94/50
720p: 59.94/50

Streaming: Simultaneous IP (RTSP format with H.264 compression) up to 1080p/30
PTZ
Pan Angle: -160 to 160°
Speed: 0.35°/sec to 120°/sec
Tilt Angle: +90 to -30°
Speed: 0.35°/sec to 120°/sec
Control Vaddio IR remote commander
Web interface
Telnet
RS-232 API (modified VISCA)
Physical and Environmental
Power 12 VDC, 3A power supply
LTPoE
Temperature & Humidity Operating
23 to 140°F / -5 to 60°C
20 to 80% RH (non-condensing)

Storage
-4 to 140°F / -20 to 60°C
20 to 95% RH (non-condensing)
Dimensions 7.9 x 8.0 x 7.7″ / 20.0 x 20.3 x 19.6 cm
Weight 6.0 lb / 2.7 kg
Packaging Info
Package Weight 11.2 lb
Box Dimensions (LxWxH) 13.5 x 13.5 x 11.8″

Vaddio OneLINK HDMI Extension System for HDBaseT Cameras Specs

Physical and Environmental
Cable Run Max: 328′ / 100 m
Power Input: 48 VDC, 1.36 A
To Camera: 12 VDC, 3 A
Environmental Operating/Storage Temperature: 32 to 104°F / 0 to 40°C
Humidity: 20 to 80% RH (non-condensing)
Dimensions 1.73 x 8.39 x 5.98″ / 44 x 213 x 152 mm
Weight 1.55 lb / 0.7 kg
Packaging Info
Package Weight 3.35 lb
Box Dimensions (LxWxH) 12.5 x 9 x 3.3″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Vaddio RoboSHOT 20 UHD OneLINK HDMI System (White)”

There are no reviews yet.

Related products