Western Digital WD3009FYPX 3TB SATA Hard Drive

Capacity: 3000GB
Spindle Speed: 5,400RPM
Interface Type: SATA
Disk Size: 3.5″x1.0″ (LFF Hard Drive)
Sustained Throughput (MBps): 
Average Seek Time (read/write ms): 
Electrical Interface Speed: SATA 600 – 6.0Gbps
On-Board Cache: 64MB

Western Digital RE4-GP Series WD3009FYPX 3000GB 6Gbps IntelliPower Serial ATA Expansion Drive for WD Sentinel DX4000 / RX4100 – Brand New

As demand for storage continues to expand, the need for more efficient power solutions becomes paramount. WD T3 enterprise SATA hard drives make it possible for large-scale data centers to increase storage capacity without exceeding available power, and in many cases actually reducing power consumption. WD T3 drives help combat the four major challenges large data installations face—total drive slots, maximum capacity, power allotment, and financial constraints—while lowering the total cost of ownership.

Reduced power consumption –The combination of WD’s IntelliSeek™, NoTouch™, and IntelliPower™ technologies brings optimized performance at industry-leading low power consumption; power is reduced as much as 40 percent.

Helps enable eco-friendly servers – Each WD T3 drive consumes an average of 4-5 watts less than competitor drives making it possible for energy-conscious customers to build servers with higher capacities, ensured reliability, and promote energy conservation.

Lower total cost of ownership – Large data-hungry financial institutions and web service providers can save up to $10 per drive per year in electricity costs (U.S). A large data center with 10,000 drives could realize up to $100,000 in savings per year.

24×7 reliability –With 1.2 million hours MTBF, these drives have the highest available reliability rating on a high-capacity drive.

IntelliPower –A fine-tuned balance of spin speed, transfer rate, and caching algorithms designed to deliver both significant power savings and solid performance. Additionally, WD GreenPower™ drives consume less current during start up allowing more drives to spin up simultaneously resulting in faster system readiness.

IntelliSeek –Calculates optimum seek speeds to lower unnecessary power consumption, noise, and vibration.

NoTouch ramp load technology –The recording head never touches the disk media ensuring significantly less wear to the recording head and media as well as better drive protection in transit.

Active Power Management –WD GreenPower drives monitor work load and automatically invoke idle mode whenever possible to further reduce unnecessary power consumption. Drive recovery time from idle mode is less than one second, providing seamless power management between the drive and the host controller.

StableTrac™ – Secures the motor shaft at both ends to reduce system-induced vibration and stabilize platters for accurate tracking, during read and write operations.

RAID-specific time-limited error recovery (TLER) –Pioneered by WD, this feature prevents drive fallout caused by the extended hard drive error-recovery processes common to desktop drives.

Rotary Acceleration Feed Forward (RAFF™) –Optimizes operation and performance when the drives are used in vibration-prone multi-drive systems such as rackmounted servers.

Alt MPN – WDBBDN0030HNC-NASN / WD3009FYPX-09AAMB0

Compatibility

Compatible with WD Sentinel DX4000 6 TB (WDBLGT0060KBK-NESN) and 12 TB (WDBLGT0120KBK-NESN) and WD Sentinel RX4100 12 TB (WDBLVH0120KBK-NESN) drives.