Western Digital RE4 WD2503ABYX 250GB 7.2K Enterprise 3.5″ SATA Hard Drive |
Capacity: 250GB
Spindle Speed: 7,200RPM
Interface Type: SATA
Disk Size: 3.5″x1.0″ (LFF Hard Drive)
Sustained Throughput (MBps): 128
Average Seek Time (read/write ms):
Electrical Interface Speed: SATA 300 – 3.0Gbps
On-Board Cache: 64MB
WD RE4 Enterprise SATA Hard Drives |
Dual processor |
RAFF™ |
IntelliSeek™ |
Multi-axis shock sensor |
RAID-specific, time-limited error recovery (TLER) |
NoTouch™ ramp load technology |
Thermal extended burn-in test |
Third generation dynamic fly height |
24×7 reliability
|
Specifications | |
Model number | WD2503ABYX |
Interface | SATA 3 Gb/s |
Formatted capacity | 251 GB |
User sectors per drive | 490,350,672 |
Native command queuing | Yes |
SATA latching connector | Yes |
Form factor | 3.5-inch |
Performance | |
Max Data transfer rate | 3 Gb/s |
Cache (MB) | 64 |
Rotational speed (RPM | 7200 |
Average drive ready time (sec) | 14 |
Configuration/Organization | |
Heads/disks | 1/1 |
Bytes per sector (STD) | 512 |
Reliability/Data Integrity | |
Load/unload cycles | 600,000 |
Non-recoverable read errors per bits read | <1 in 1015 |
Limited warranty (years) | 5 |
Power Management | |
12VDC (A, max) | 2.25 |
Average required wats Read/Write | 6.4 |
Average required wats Idle | 4.5 |
Average required wats Standby | 0.8 |
Average required wats Sleep | 0.8 |
Environmental Specifications | |
Operating Temperature (°C) | 5 to 55 |
Non-operating Temperature (°C) | -40 to 70/td> |
Shock (Gs) Operating (2 ms, read/write) | 30 |
Shock (Gs) Operating (2 ms, read) | 65 |
Shock (Gs) Non-operating (2 ms) | 350 |
Average acoustics (dBA) Idle mode | 27- |
Average acoustics (dBA) Performance seek mode | 30 |
Average acoustics (dBA) Quiet seek mode | 29 |
Physical Dimensions | |
Height (in./mm, max) | 1.028/26.1 |
Length (in./mm, max) | 5.787/147 |
Width (in./mm, ± .01 in.) | 4/101.6 |
There are no reviews yet.