IE-2000-4TS-G-B is the IE2000 series IE 4 10/100, 2 GE, and LAN Base switch. The Cisco IE 2000 Series are designed for low cost, low ports, and small sizes. They offer:
1. Four, eight, or 16 10/100Base-T Ethernet ports (Small Form-Factor Pluggable [SFP] downlinks on selected models); fixed configurations with a compact form factor
2. Two gigabit combo ports: SFP (100 Mbps and 1 Gbps) or RJ45 uplink
3. Dual-input DC power supply, alarm relays, DIN rail mount
4. Industrial Power over Ethernet (PoE) solution
5. Conformal coating available
6. Swappable SD flash card and mini-USB connector
7. Industrial environmental compliance and certifications
8. Industrial partner applications: Ethernet/IP and PROFINET
Quick Spec
Table 1 shows the quick spec.
Part Number |
IE-2000-4TS-G-B |
Total Ports |
6 |
RJ45 Ports |
4 FE |
SFP Ports |
2 GE |
Manufacturing license |
LAN Base |
Dimensions (H x W x D)
including DIN rail |
5.1ā H x 2.95ā W x 4.51ā D in
(130mm H x 74.9mm W x 115mm D) |
Weight |
IE-2000 6 ports chassis: 2.45 lb (1.11 kg) |
Note:
ā |
4 FE RJ45 Ports |
ā” |
2 GE SFP Ports |
⢠|
SD Flash |
⣠|
2 Dry-contact alarm inputs, and 1 alarm relay output |
⤠|
Dual DC inputs |
ā„ |
Console port RJ45 and Mini USB |
IE-2000-4TS-G-B Specification
Physical Specification
Total Ports
6
RJ45 Ports
4 FE
SFP Ports
2 GE
Manufacturing license
LAN Base
Hardware
āĀ Ā 256 MB DRAM with ECC memory
āĀ Ā IEEE 1588v2 FPGA
āĀ Ā 64 MB on-board flash memory
āĀ Ā 1GB removable SD flash memory card (optional)
āĀ Ā Mini-USB connector
Alarm
āĀ Ā Alarm I/O: Two alarm inputs to detect dry contact open or close; one alarm output relay
Power consumption
āĀ Ā 4-port downlink models: 9.5-15 W
Connectors and cabling
āĀ Ā 10/100/1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
Dimensions
(H x W x D)
including DIN rail
āĀ Ā IE-2000 6 ports (copper downlinks) chassis: 5.1āH x 2.95āW x 4.51āD in (130mm H x 74.9mm W x 115mm D)
Weight
āĀ Ā IE-2000 6 ports chassis: 2.45 lb (1.11 kg)
IE2000 Software Features
LAN Lite license
Baseline features
Layer 2 switching
IEEE 802.1, 802.3, 802.3at, 802.3af standard (see Table 8), VTPv2, NTP, UDLD, CDP, LLDP, Unicast MAC filter, Resilient Ethernet Protocol (REP), Media Redundancy Protocol (MRP) Ring (IEC 62439-2)
Security
SCP, SSH, SNMPv3, TACACS+, RADIUS Server/Client, MAC Address Notification, BPDU Guard, SPAN session
Multicast
IGMPv1, v2, v3 Snooping, IGMP filtering, IGMP Querier
Management
Fast Boot, Express Setup, Web Device Manager, CNA, Cisco Prime, LMS, MIB, SmartPort, SNMP, syslog
Industrial Ethernet
EtherNet/IP, Profinet v2
LAN Base license
Additional features
Layer 2 switching
VTPv3, EtherChannel, Voice VLAN, Flexlink
Security
IPv4 Port-Security, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard, 802.1x, Guest VLAN. MAC Authentication Bypass, 802.1x Multi-Domain Authentication, Storm Control, Trust Boundary, Access-List (ACL)
Quality of service
IPv4 Ingress Policing, Rate-Limit, Egress Queuing/Shaping, AutoQoS, PROFINET QoS
Management
Port-Based DHCP, Storm Control – Unicast, Multicast, Broadcast, SPAN Sessions, RSPAN, DHCP Server, Customized TCAM/SDM Size Configuration, Embedded Event Manager (EEM)
Industrial Ethernet
IEEE 1588 PTPv2
IPv4 routing
IPv4 static routing
IPv6 routing
IPv6 host support, HTTP over IPv6, SNMP over IPv6
Enhanced LAN Base
Additional features
Industrial management
Layer 2 switching with 1:1 static Network Address Translation (NAT)
IP Lite license
Additional features
IPv4 routing
RIP, OSPF, EIGRP, VRF Lite, PIM for L3 multicast routing including sparse (SM) and dense (DM) mode.
IPv6 Routing
IPv6 Static routing, OSPFv3
Security
FIPS 140-2
Embedded Event Manager
EEM feature enabled with IP Lite license
DNA Essentials
Additional features
Cisco DNA Center
Discovery, topology, inventory, software image management
Visibility
DNA assurance, Device 360
Day-zero network bring-up automation
Cisco Network Plug-and-Play application
There are no reviews yet.