04 3550600
052 7036860
info@techsouq.com
Network Switches & Routers
Huawei CE12808S Bundle A (Assembly Chassis,2*MPUA-S,4*SFUB-S,2*PHD-3000WA,3*CE-L48XS-EC,OS)
| Model: | Huawei CE12808S Bundle A (Assembly Chassis,2*MPUA-S,4*SFUB-S,2*PHD-3000WA,3*CE-L48XS-EC,OS) |
| Detail: |
Huawei CE12808S Bundle A (Assembly Chassis,2*MPUA-S,4*SFUB-S,2*PHD-3000WA,3*CE-L48XS-EC,OS)
|
AED194,699.00
CE12808SA-BA is CE12808S Bundle A (Assembly Chassis, 2*MPUA-S, 4*SFUB-S, 2*PHD-3000WA, 3*CE-L48XS-EC,OS).
Quick Specs
Table 1 shows the Quick Specs.
| Product Code | CE12808SA-BA |
| Switching Capacity (Tbit/s) |
89/ 516 |
| Forwarding Rate (Mpps) |
34,560 |
| Service Slots | 8 |
| Switching Fabric Module Slots |
4 |
| LPU slots | 8 (slot IDs: 01 to 08) |
| MPU slots | 2 (slot IDs: 09 to 10) |
| CMU slots | None (monitoring function integrated on the MPU) |
| SFU slots | 4 (slot IDs: 11 to 14) |
| Power slots | 8 (slot IDs: PM1 to PM8) |
| Fan slots | 6 (slot IDs: FAN1 to FAN6) |
Note:
| ā | CE12800 series switchesĀ chassis header, showing the following:
|
| ā” | Two MPUs |
| ā¢ | LPU |
| ā£ | SFU |
| ā¤ | Front ESD jack |
| ā„ | Power modules |
| ā¦ | Cable management frame |
| ā§ | Two power switches |
*Ā In the CE12808S series switches, MPUs, SFUs, and LPUs are all horizontally installed in the chassis.
* CE12808SA-BA is CE12808S Bundle A (Assembly Chassis, 2*MPUA-S, 4*SFUB-S, 2*PHD-3000WA, 3*CE-L48XS-EC,OS), the other modules or cards must be purchased separately.
Note:
| ā | Rear ESD jack |
| ā” | Handle |
| ā¢ | Fan modules |
| ā£ | Two ground points for a dual-hole ground lug, with a yellow grounding label attached |
| ā¤ | Ā Power distribution unit |
*Ā In the CE12808S series switches, MPUs, SFUs, and LPUs are all horizontally installed in the chassis.
* CE12808SA-BA is CE12808S Bundle A (Assembly Chassis, 2*MPUA-S, 4*SFUB-S, 2*PHD-3000WA, 3*CE-L48XS-EC,OS), the other modules or cards must be purchased separately.
CE12808SA-BA Specifications |
|
| Switching Capacity (Tbit/s) |
89/ 516 |
| Forwarding Rate (Mpps) |
34,560 |
| Service Slots | 8 |
| Switching Fabric Module Slots |
4 |
| Fabric Architecture | Clos architecture, cell switching, VoQ, and distributed large buffer |
| Airflow Design | Strict front-to-back |
| Device Virtualization | Virtual System (VS) |
| Cluster Switch System (CSS)2 | |
| Super Virtual Fabric (SVF)3 | |
| Network Virtualization | M-LAG |
| TRILL | |
| VxLAN routing and bridging | |
| EVPN | |
| QinQ in VXLAN | |
| VM Awareness | Agile Controller |
| Network Convergence | FCoE |
| DCBX, PFC, and ETS | |
| Data Center Interconnect | BGP-EVPN |
| Ethernet Virtual Network (EVN) for inter-DC Layer 2 network interconnections | |
| Programmability | OpenFlow |
| ENP programming | |
| OPS programming | |
| Puppet, Ansible, and OVSDB plug-ins released on open source websites | |
| Linux container for open source and customization programming | |
| Traffic Analysis | NetStream |
| Hardware-based sFlow | |
| VLAN | Adding access, trunk, and hybrid interfaces to VLANs |
| Default VLAN | |
| QinQ | |
| MUX VLAN | |
| GVRP | |
| MAC Address | Dynamic learning and aging of MAC addresses |
| Static, dynamic, and blackhole MAC address entries | |
| Packet filtering based on source MAC addresses | |
| MAC address limiting based on ports and VLANs | |
| IP Routing | IPv4 routing protocols, such as RIP, OSPF, IS-IS, and BGP |
| IPv6 routing protocols, such as RIPng, OSPFv3, ISISv6, and BGP4+ | |
| IP packet fragmentation and reassembling | |
| IPv6 | IPv6 over VXLAN |
| IPv6 over IPv4 | |
| IPv6 Neighbor Discovery (ND) | |
| Path MTU Discovery (PMTU) | |
| TCP6, ping IPv6, tracert IPv6, socket IPv6, UDP6, and Raw IP6 | |
| Multicast | IGMP, PIM-SM, PIM-DM, MSDP, and MBGP |
| IGMP snooping | |
| IGMP proxy | |
| Fast leave of multicast member interfaces | |
| Multicast traffic suppression | |
| Multicast VLAN | |
| MPLS | Basic MPLS functions |
| MPLS VPN/VPLS/VPLS over GRE | |
| Reliability | Link Aggregation Control Protocol (LACP) |
| STP, RSTP, VBST, and MSTP | |
| BPDU protection, root protection, and loop protection | |
| Smart Link and multi-instance | |
| Device Link Detection Protocol (DLDP) | |
| Ethernet Ring Protection Switching (ERPS, G.8032) | |
| Hardware-based Bi-directional Forwarding Detection (BFD) | |
| VRRP, VRRP load balancing, and BFD for VRRP | |
| BFD for BGP/IS-IS/OSPF/Static route | |
| In-Service Software Upgrade (ISSU) | |
| Segment Routing (SR) | |
| QoS | Traffic classification based on Layer 2, Layer 3, Layer 4, and priority information |
| Actions include ACL, CAR, and re-marking | |
| Queue scheduling modes such as PQ, WFQ, and PQ + WRR | |
| Congestion avoidance mechanisms, including WRED and tail drop | |
| Traffic shaping | |
| O&M | IEEE 1588v2 |
| Packet Conservation Algorithm for Internet (iPCA) | |
| Dynamic Load Balancing (DLB) | |
| Dynamic Packet Prioritization (DPP) | |
| Network-wide path detection | |
| Microsecond-level buffer detection | |
| Configuration and Maintenance |
Console, Telnet, and SSH terminals |
| Network management protocols, such as SNMPv1/v2c/v3 | |
| File upload and download through FTP and TFTP | |
| BootROM upgrade and remote upgrade | |
| Hot patches | |
| User operation logs | |
| Zero-Touch Provisioning (ZTP) | |
| Security and Management |
802.1x authentication |
| RADIUS and HWTACACS authentication for login users | |
| Command line authority control based on user levels, preventing unauthorized users from using commands | |
| Defense against MAC address attacks, broadcast storms, and heavy-traffic attacks | |
| Ping and traceroute | |
| Remote Network Monitoring (RMON) | |
| Dimensions (W x D x H, mm) |
442 x 620 x 708.4 (16U) |
| Chassis Weight (empty) | < 100 kg (220 lb) |
| Operating Voltage | AC: 90V to 290V DC: -38.4V to -72V HVDC: 240V |
| Max. Power Supply | 12,000W |
There are no reviews yet.