D-Link Network DWL-8600AP Unified Wireless Poe Access Point Simultaneous 11n Dual Band

D-Link Network DWL-8600AP Unified Wireless Poe Access Point Simultaneous 11n Dual Band

Availablity: 10 in stock

د.إ1,729.00

Want create site? Find Free WordPress Themes and plugins.

The DWL-8600AP is D-Link’s next generation Unified Access Point supporting the IEEE 802.11n standard. Versatile and powerful, this device can be flexibly deployed as a stand-alone “fit” wireless Access Point or as a “thin” managed Access Point (AP) manageable from a wireless switch such as D-Link’s DWS-3160/DWS-4026 or DWC-1000 Wireless Controller.

Blazing wireless speeds

802.11n offers up to six times increased throughput when compared with existing 802.11a/g networks. By employing the DWL-8600AP today, you can prepare your business for the future generation of wireless devices and mobile applications. The DWL-8600AP is also fully backwards compatible with 802.1a/b/g clients.


Green technology for advanced power saving

The DWL-8600AP features scheduled and unscheduled Automatic Power Save Delivery (APSD). Unscheduled APSD (U-APSD) is a power management method that is more efficient than older 802.11 Power Save Polling. The primary benefit of U-APSD is that it allows for the voice client to synchronize the transmission and reception of voice frames with the AP, thereby allowing the client to go into power saving mode when not sending or receiving packets.

Intelligent “Fit” Access Point

The DWL-8600AP has everything on-board that enables network administrators to set up a secure wireless network and to connect to any Ethernet switch or router. Advanced wireless functions that the DWL-8600AP supports include: WEP data encryption, WPA/WPA2 security, client MAC address filtering, AP load balancing, QoS/WMM (Wireless Multimedia), and Rogue AP Detection.


“Thin” AP centrally managed

Alternatively, the DWL-8600AP can operate in conjunction with a D-Link DWS-4026 unified wired/wireless switch. In this mode, multiple DWL-8600APs can connect directly or indirectly to the switch to provide unparalleled security and wireless mobility for wireless clients. Each DWL-8600AP will be continually tuned by the switch to provide optimal RF channels and transmission power for all mobile clients, giving them the best wireless signals in both 2.4GHz and 5.0GHz bands and uninterrupted wireless connectivity.

In this mode, the switch automatically configures every connected “thin” DWL-8600AP, so no configuration is necessary during installation. If a DWL-8600AP needs to be replaced, the replacement DWL-8600AP automatically inherits the same configuration, making the replacement process simple.

Flexible Quadband Wireless LAN connectivity

The DWL-8600AP delivers concurrent wireless performance in both frequency bands simultaneously. With Quadband connectivity, two wireless networks are effectively created, both running at full bandwidth, offering a significant increase in total network capacity. At the same time, the DWL-8600AP remains fully backward compatible with the 802.11b standard in the 2.4GHz frequency.


Optimal Wireless Performance

The architecture of most current wireless LAN controllers requires wireless traffic to return to the controller for centralized processing, providing unnecessary traffic delay. The DWL-8600AP –when operating with a DWS-4026 switch – offers administrators extra options.

 
Total security & Quality of Service (QoS)

The DWL-8600AP continuously scans both frequency bands and their associated channels to detect rogues while simultaneously providing wireless connectivity to mobile clients. If a rogue is detected, it reports the result to the DWS-4026 wireless switch that manages it. From a management console, administrators can identify the rogue AP and take appropriate action.

The DWL-8600AP supports 64/128/152-bit WEP data encryption, WPA/WPA2 security and multiple SSID per RF frequency band. These functions along with wireless user MAC Address Filtering and SSID Broadcast Disable can be used to set up security and limit outsiders’ access to the internal network. The DWL-8600AP supports 802.1Q VLAN Tagging and WMM (Wi-Fi Multimedia) for important wireless transmissions such as VoIP and streaming media applications, delivering critical user-based services, such as prioritized delivery of voice traffic.

  • Type
    • Unified access point
  • Wireless standards
    • Simultaneous
    • 2.4 GHz 802.11b/g/n
    • 5 GHz 802.11a/n
  • Maximum wireless speedMIMO
    • 300 Mbps
  • Antenna type
    • 4 detachable omni-directional antennas
  • Antenna gain
    • 4 dBi for 2.4 GHz
    • 6 dBi for 5 GHz
  • Power-over-Ethernet
    • 802.3af
  • Wired interfaceConsole port
    • 1 x Gigabit Ethernet
  • Indoor/outdoor
    • Indoor
  • Type of housingPlenum rated (UL-2043)
    • Metal
  • Wireless modes
    • Access Point (AP)
    • WDS bridge
    • WDS with AP
  • Maximum number of SSIDsAuto channel selection
    • 16 per radio
  • WMM-PS/802.11e (U-APSD)
  • Wi-Fi scheduler
  • AP traffic load balance
  • L2 roaming
  • WEP 64/128 bit
  • WPA/WPA2-Personal/Enterprise
  • TKIP/AES encryption
  • WPA_WPA2_PSK over WDS
  • WLAN partition
  • SSID broadcast disable
  • Rogue AP detection
  • Station isolation
  • MAC address filtering
  • 802.1X authentication
  • Wireless controller/unified switch managed features
    • Rogue AP mitigation
    • L2/L3 fast roaming
    • WIDS/WIPS
    • Auto-channel, auto-RF management
    • AP load balance
    • Captive portal
    • View neighbour AP information
  • Supported D-Link Wireless Controllers/Unified SwitchesWEB
    • DWC-1000
    • DWS-3024/DWS-3024L
    • DWS-3160
    • DWS-4026
  • SNMP (v1, v2c, v3)
  • CLI
  • Telnet
  • SSH
  • Syslog
  • Central management (through AP Manager II and/or D-View Wireless Control Module)
  • Configuration group sync through AP Array (up to 8 APs)Hardware
    • Solid die cast metal housing design for indoor deployment
    • 1 Gigabit Ethernet port with built-in 802.3af Power over Ethernet (PoE)
    • Four detachable antennae
    • Locking brackets included

    High Performance Connectivity

    • 802.11n WLAN standard
    • Quadband technology: up to 300 Mbps wireless data transfer rates in each frequency band simultaneously*
    • RF Channels and output power auto-adjustment
    • Wi-Fi Multimedia (WMM) certified
    • Supports Wireless Distribution System (WDS) (stand-alone mode)

    *Maximum wireless signal rates 300 Mbps and 54 Mbps are based on IEEE 802.11n and 802.11a/g specifications, respectively. Actual data throughput may vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead can lower actual data throughput rate.

    Security

    • 64/128/152-bit WEP data encryption
    • WPA Personal/WPA Enterprise
    • WPA2 Personal/WPA2 Enterprise
    • 802.1X User Authentication
    • Rogue AP detection
    • 802.1Q VLAN tagging
    • Multiple SSIDs (16 per frequency band)
    • MAC address filtering

    Quality of Service (QoS)

    • Wi-Fi Multimedia (WMM) certified
    • SVP (SpectraLink Voice Priority)

    Management

    • Through DWS-4026 Unified Switch or stand-alone
    • AP Clustering for simple management and configuration
Did you find apk for android? You can find new Free Android Games and apps.
SKU: DWL-8600AP Category: Tags: , ,
Weight 2 kg
Want create site? Find Free WordPress Themes and plugins.
Did you find apk for android? You can find new Free Android Games and apps.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “D-Link Network DWL-8600AP Unified Wireless Poe Access Point Simultaneous 11n Dual Band”

There are no reviews yet.