S6720-32C-PWH-SI-AC – Huawei S6702 Series Switches


Model: S6720-32C-PWH-SI-AC – Huawei S6702 Series Switches
Detail:
S6720-32C-PWH-SI Bundle(24 Ethernet 100M/1/2.5/5/10G ports,4 10 Gig SFP+,PoE++,with 1 interface slot,1*AC power

AED40,099.00

Huawei S6720-SI series switches are next-generation multi-gigabit 10GE fixed switches. They are ideal for high-speed wireless device access, 10GE data center server access, and campus network access/aggregation.

Quick Specs

Table 1 shows the Quick Specs.

Product Code

S6720-32C-PWH-SIĀ -AC

Switching Capacity 2.56 Tbit/s
Forwarding Performance 240 Mpps
Fixed ports 24x100M/1G/2.5G/5G/10GBase-T

Ethernet ports, 4x10GE SFP+

Extended slots One extended slot,support 2*40GE QSFP+,4*10GE SFP+
Dimensions (W x D x H, mm) 442 xĀ 420 xĀ 44.4
Height 1 U
Typical power consumption • 650W DC/580W AC without card and PD: 106.9W

• 1150W AC /1000W AC without card and PD: 121.6W

Maximum power consumption (W) • 650W DC/580W AC (without card and PD): 125.6W

• 1150W AC/1000W AC(without card and PD): 125.6W

Note:

ā‘ 

Twenty-four PoE++ 100M/1000M/2.5GE/5GE/10GE BASE-T ports (MultiGE port)

ā‘£

One USB port

ā‘”

Four 10GE SFP+ ports

⑤

One ETH management port

ā‘¢

One console port

ā‘„

One PNP button

Note:

ā‘ 

Ground screw

ā‘£

Fan slot

ā‘”

ESN label

⑤

Power module slot 2

ā‘¢

Rear card slot

ā‘„

Power module slot 1

S6720-32C-PWH-SI-ACĀ Specification

Switching Capacity 2.56 Tbit/s
Forwarding Performance 240 Mpps
Fixed ports 24x100M/1G/2.5G/5G/10GBase-T

Ethernet ports, 4x10GE SFP+

Extended slots One extended slot, support 2*40GE QSFP+,4*10GE SFP+
MAC address table 32K

MAC address learning and aging

Static, dynamic, and blackhole MAC address entries

Packet filtering based on source MAC addresses

VLAN features 4K VLANs

Guest VLAN and voice VLAN

VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports

VLAN mapping

Super VLAN

Basic QinQ and selective QinQ

IPv4 routing Static routing, RIPv1, RIPv2, ECMP, URPF, OSPF, IS-IS, and BGP

VRRP

Policy-based routing

Routing policies

IPv6 routing Static routing

RIPng

OSPFv3

BGP4+

ISISv6

IPv6 features Neighbor Discovery (ND) and ND snooping

IPv6 Ping

VRRP6

DHCPv6 snooping, DHCPv6 server, and DHCPv6 relay

MLDv1 and MLDv2

PIM-DM for IPv6

PIM-SM for IPv6

6 Over 4 tunnels

Multicast IGMP V1/V2/V3 snooping

Fast leave

IGMP snooping proxy

MLD snooping

Port-based multicast traffic suppression

Inter-VLAN multicast replication

Controllable multicast

IGMP v1/v2/v3

PIM-SM and PIM-DM

Multicast Source Discovery Protocol (MSDP)

Multicast routing policies

QoS/ACL Traffic classification based on ACLs

Traffic classification based on outer 802.1p fields, inner VLAN IDs, outer VLAN IDs, source MAC addresses, and Ethernet types

Access control after traffic classification

Traffic policing based on traffic classifiers

Re-marking based on traffic classifiers

Class-based packet queuing

Associating traffic classifiers with traffic behaviors

Rate limiting on inbound and outbound ports

Traffic shaping based on ports and queues

Tail drop

Priority Queuing (PQ)

Deficit Round Robin (DRR)

PQ + DRR scheduling

Weighted Round Robin (WRR)

PQ + WRR scheduling

Reliability STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s)

BPDU protection, root protection, and loop protection

RRPP ring topology and RRPP multi-instance

Smart Link tree topology and Smart Link multi-instance, providing millisecond-level protection

switchover

Smart Ethernet Protection (SEP)

G.8032 Ethernet Ring Protection Switching (ERPS)

BFD for OSPF, IS-IS, VRRP, and PIM protocols

Enhanced trunk (E-trunk)

Security features Defense against DoS, ARP, and ICMP attacks

Binding of the IP address, MAC address, port number, and VLAN ID of a user

Port isolation, port security, and sticky MAC

MAC-Forced Forwarding (MACFF)

Limit on the number of learned MAC addresses

IEEE 802.1X authentication, MAC address authentication, Portal authentication, and hybrid

authentication

Authentication methods, including AAA, RADIUS, and HWTACACS

CPU defense

MACSec

Super Virtual Fabric (SVF) SVF Parent and Client
Management and maintenance

Ā 

iStack (using service ports as stack ports)

Virtual Cable Test (VCT)

Ethernet OAM (IEEE 802.3ah and 802.1ag)

SNMPv1/v2c/v3

RMON

Web-based network management system and relevant features

System logs and multi-level alarms

GVRP

MUX VLAN

sFlow

Hypertext Transfer Protocol Secure (HTTPS)

SSH1.5/SSH2

Operating environment

Ā 

Working temperature: 0–1800 m, 0–45°C; 1800–5000 m, the highest operating temperature reduces

by 1°C every time the altitude increases by 220 m.

Relative humidity: 5%–95% (noncondensing)

Input voltage AC:

• Rated voltage range: 100 V to 240 V AC, 50/60 Hz

• Maximum voltage range: 90 V to 264 V AC, 47/63Hz

DC:

• Rated voltage range: –48 V to –60 V DC

• Maximum voltage range: –36 V to –72 V DC

Dimensions (W x D x H, mm) 442 xĀ 420 xĀ 44.4
Height 1 U
Typical power consumption • 650W DC/580W AC without card and PD: 106.9W

• 1150W AC /1000W AC without card and PD: 121.6W

Maximum power consumption (W) • 650W DC/580W AC (without card and PD): 125.6W

• 1150W AC/1000W AC(without card and PD): 125.6W

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “S6720-32C-PWH-SI-AC – Huawei S6702 Series Switches”

There are no reviews yet.