View cart “Aruba Instant IAP-274-RW 802.11ac, 3×3:3, Wireless Access Point” has been added to your cart.

AIR-AP2802E-E-K9 – Cisco Aironet 2802E Access Point

802.11ac Wave 2 AP w/CleanAir, 4×4:3, External Antenna, 2xGbE, E Regulatory Domain

د.إ11,599.00

AIR-AP2802E-E-K9 Overview

AIR-AP2802E-E-K9 is one of the Cisco Aironet 2800 Series Access Points. This 2800 series, delivering new 802.11ac Wave 2 standard, is ideal for large enterprise organizations that rely on Wi-Fi to engage with customers. The Series is a hands-off product that’s intelligent enough to make decisions based on end-device activities and usage. AIR-AP2802E-E-K9 provides external antenna and E regulatory domain.

Quick Specs

Table 1

Product Code	AIR-AP2802E-E-K9
Frequency band and 20-MHz operating channels	E (E regulatory domain): – 2.412 to 2.472 GHz; 13 channels – 5.180 to 5.320 GHz; 8 channels – 5.500 to 5.700 GHz; 8 channels (excludes 5.600 to 5.640 GHz)
Antenna	External Antenna
Features	– 4×4 MU-MIMO with three spatial streams – MRC – 802.11ac Beamforming – 20-, 40-, 80, 160-MHz channels – PHY data rates up to 5.2 Gbps – Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) – 802.11 DFS – CSD support
Interfaces	– 2 x 100/1000BASE-T autosensing (RJ-45) – Management console port (RJ-45) – USB 2.0 (enabled via future software)
System memory	– 1024 MB DRAM – 256 MB flash
Dimensions (W x L x H)	8.66 x 8.77 x 2.50 in.
Net Weight	4.6 lb (2.09 kg)

Product Details

Figure 1 shows the face of AIR-AP2802E Model.

Notes:

①	Dual-band antenna connector A with antenna	④	Dual-band antenna connector C with antenna
②	Location of the Smart antenna connector port on the right side of the AP	⑤	Status LED
③	Dual-band antenna connector D with antenna	⑥	Dual-band antenna connector B with antenna

Figure 2 shows the Smart Antenna Connector and DART cable on the AIR-AP2802E model.

The 2802E model has a Smart antenna connector, which is connected directly to the flexible radio. Without a supported external antenna connected to the Smart Antenna connector, the flexible radio can stay only in 2.4 GHz mode. If an external antenna is connected, the flexible radio can be used in the full Flexible Radio Assignment mode, allowing dual 5 GHz and Wireless Security Monitoring modes.

To connect to any supported RP-TNC connector-type external antenna to the Smart antenna connector, use the DART cable connector AIR-CAB002-DART-R=, which is to be ordered separately.

Smart Antenna Connector and Cable

Compare to Similar Items

Table 2 shows the comparison between two AP.

Models	AIR-AP2802E-E-K9	AIR-AP2802E-F-K9
Frequency band and 20-MHz operating channels	E (E regulatory domain): – 2.412 to 2.472 GHz; 13 channels – 5.180 to 5.320 GHz; 8 channels – 5.500 to 5.700 GHz; 8 channels (excludes 5.600 to 5.640 GHz)	F (F regulatory domain): – 2.412 to 2.472 GHz; 13 channels – 5.745 to 5.805 GHz; 4 channels
Antenna	External Antenna	External Antenna
Features	– 4×4 MU-MIMO with three spatial streams – MRC – 802.11ac Beamforming – 20-, 40-, 80, 160-MHz channels – PHY data rates up to 5.2 Gbps – Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) – 802.11 DFS – CSD support	– 4×4 MU-MIMO with three spatial streams – MRC – 802.11ac Beamforming – 20-, 40-, 80, 160-MHz channels – PHY data rates up to 5.2 Gbps – Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) – 802.11 DFS – CSD support

Category: Wireless Access Points AP Tag: AIR-AP2802E-E-K9

AIR-AP2802E-E-K9 Specification

Cisco AIR-AP2802E-E-K9 Specifications
Product Model	AIR-AP2802E-E-K9
Brand	Cisco
Wireless Standard	802.11ac Wave 2
CleanAir	Yes
Antenna Configuration	4×4:3
External Antenna	Yes
Ethernet Ports	2x Gigabit Ethernet (GbE)
Regulatory Domain	E

Based on 0 reviews

0.0 overall

Be the first to review “AIR-AP2802E-E-K9 – Cisco Aironet 2802E Access Point” Cancel reply

There are no reviews yet.

AIR-AP2802E-E-K9 – Cisco Aironet 2802E Access Point