APC Smart-UPS VT 10KVA 208V With 2 Batteries Expandable To 4, Int Maint Bypass, Parallel Capable

APC Smart UPS VT SUVTP10KH2B4S 10KVA UPS, With 2 Batteries Expandable To 4, Int Maint Bypass, Parallel Capable

Availablity: 10 in stock


Want create site? Find Free WordPress Themes and plugins.

APC Smart UPS VT SUVTP10KH2B4S 10KVA UPS, With 2 Batteries Expandable To 4, Int Maintenance Bypass, Parallel Capable

Parallel-capacity capable 
Increases total power capacity by using multiple uninterruptible power supplies simultaneously.
Parallel-redundant capable 
Power the connected equipment with multiple uninterruptible power supplies to increase system redundancy

Smart-UPS VT Features & Benefits

Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.
Scalable runtime
Allows additional run time to be quickly added as needed.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Battery modules connected in parallel
Delivers higher availability through redundant batteries.
Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Shippable with modules installed
Enables pre-installation UPS staging and testing and faster installation.
Modular design
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
Network manageable
Provides remote power management of the UPS over the network.
InfraStruXure Manager Compatible
Enables centralized management via the APC InfraStruXure Manager.
LCD display
Alpha-Numeric Display which displays system parameters and alarms.
Audible alarms
Provides notification of changing utility power and UPS power conditions
Programmable frequency
Ensures compatibility with different input frequencies.
LED status indicators
Quickly understand unit and power status with visual indicators.
Customize UPS capabilities with management cards.
Total Cost of Ownership
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Manual maintenance bypass
Reduces installation costs by eliminating the need for an external mechanical bypass.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Cold-start capable

Provides temporary battery power when the utility power is out.

Did you find apk for android? You can find new Free Android Games and apps.
SKU: SUVTP10KH2B4S Category: Tags: , , , , ,
Weight550 kg
Want create site? Find Free WordPress Themes and plugins.


Output Power Capacity
8000 Watts / 10 kVA
Max Configurable Power
8000 Watts / 10 kVA
Nominal Output Voltage
400V 3PH
Output Voltage Note
Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
Efficiency at Full Load
Output Voltage Distortion
Less than 5% at full load
Output Frequency (sync to mains)
47 – 53 Hz for 50 Hz nominal
Other Output Voltages
380, 415
Crest Factor
3 : 1
Double Conversion Online
Waveform Type
Sine wave
Output Connections
(1) Hard Wire 4-wire (3PH + G) 
(1) Hard Wire 5-wire (3PH + N + G) 
(1) Screw Terminals 
Built-in Maintenance Bypass, Built-in Static Bypass


Nominal Input Voltage
400V 3PH
Input Frequency
47 – 70 Hz (auto sensing)
Input Connections
Hard Wire 5-wire (3PH + N + G) 
Input voltage range for main operations
304 – 477V
Other Input Voltages
380, 415
Maximum Input Current
Input Breaker Capacity
20  A

Batteries & Runtime

Battery Type
Included Battery Modules
Available Battery Module Slots
Typical recharge time
5 hour(s)
RBC™ Quantity
Nominal Battery Voltage
+/-192 V (split battery referenced to neutral)
End of Discharge Battery Voltage
+/-154 V
Runtime Graph
CurvePart Number(s)
+ (1)SYBT4
+ (2)SYBT4


Hover over the line on the graph above to view the runtime at any desired load
Estimated runtimes based on battery vendor data, at typical environmental conditions, with no electrical input and balanced PF = 0.8 output.

Communications & Management

Interface Port(s)
DB-9 RS-232, Smart-Slot
Pre-Installed SmartSlot™ Cards
Control panel
Multi-function LCD status and control console
Audible Alarm
Audible and visible alarms : configurable delays
Emergency Power Off (EPO)


Maximum Height
1499.00 mm
Maximum Width
559.00 mm
Maximum Depth
813.00 mm
Net Weight
415.00 KG
Shipping Weight
445.91 KG
Shipping Height
1643.00 mm
Shipping Width
650.00 mm
Shipping Depth
1062.00 mm
Units per Pallet


Operating Environment
0 – 40 °C
Operating Relative Humidity
0 – 95%
Operating Elevation
0-999.9 meters
Storage Temperature
-50 – 40 °C
Storage Relative Humidity
0 – 95%
Storage Elevation
0-15000 meters
Audible noise at 1 meter from surface of unit
64.00 dBA
Online Thermal Dissipation
1774.00 BTU/hr
Protection Class
IP 20


Regulatory Approvals
C-tick, CE, EN 50091-2, EN/IEC 62040-3, IEC 61000-3-2, IEC 61000-3-3, ISO 14001, ISO 9001, VFI-SS-111
Standard Warranty
1 year repair or replace, Start-Up Service
Did you find apk for android? You can find new Free Android Games and apps.

Based on 0 reviews

0.0 overall

Be the first to review “APC Smart UPS VT SUVTP10KH2B4S 10KVA UPS, With 2 Batteries Expandable To 4, Int Maint Bypass, Parallel Capable”

There are no reviews yet.