APC Symmetra PX All-In-One 16kW Scalable to 48kW, 400V

Availability:

10 in stock


د.إ79,999.00

10 in stock

Scalable power, runtime & distribution in a high-density, single-frame design. This high-efficiency 3-phase UPS scales as your data center grows up to 48kW/48kVA. Suitable for small & medium data center applications.

Includes: Network Management Card, Start-Up Service

  • UPS
  • External
  • 16000 VA power capacity
  • 10.4 min battery run time (up to)
  • 16 kW power provided
  • AC 230/380/400/415 V
  • 1 year warranty

SY16K48H-PD Features

Swappable batteries 
Allows quick addition of runtime capacity or replacement of existing battery modules. Installed modules are automatically recognized by the system.
Battery replacement without tools 
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Dual mains input 
Increases availability by allowing the UPS to be connected to two separate power sources.
Automatic self-test 
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery modules connected in parallel 
Delivers higher availability through redundant batteries.
Manageable external batteries 
Reduces preventative maintenance service needs by monitoring the health and status of the external batteries and their expected runtime.
Temperature-compensated battery charging 
Prolongs battery life by regulating the charge voltage according to battery temperature.
Intelligent battery management 
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Symmetra PX Features & Benefits

Availability
Configurable for N+1 internal redundancy
Provides high availability through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.
Redundant Intelligence Modules
Provides higher availability to the UPS connected loads by giving redundant communication paths to critical UPS functions.
Power Modules connected in parallel
Enhances availability by allowing immediate, seamless recovery from isolated module failures.
Swappable power modules
Allows quick addition of power capacity or replacement of existing power modules. Installed modules are automatically recognized by the system.
Modular design
Provides fast serviceability and reduced maintenance requirements via self-diagnosing, field-replaceable modules.
Network manageable
Provides remote power management of the UPS over the network.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Agility
Scalable power capacity
Reduces UPS over-sizing costs today by allowing quick power upgrades, within the same footprint, later.
Programmable frequency
Ensures compatibility with different input frequencies.
SmartSlot
Customize UPS capabilities with management cards.
Total Cost of Ownership
Fully-rated power kVA equals kW
Reduces cost by eliminating the need for an oversized UPS for Power Factor Corrected (PFC) loads.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
5×8 Start-up service included
Required for full coverage of factory warranty
Manageability
Integrates with StruxureWare Data Center Expert
An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure environments from anywhere on the network
LED status indicators
Quickly understand unit and power status with visual indicators.
Audible alarms
Provides notification of changing utility power and UPS power conditions

General

Bypass Connection
5 wire (3PH + N + G)
Bypass Voltage Tolerance
+/-10% settable from +/-4/6/8 and 10%
Max Bypass Input Current
80A
Bypass Protection Device
80A

Output

Output Power Capacity
16 kW / 16 kVA
Max Configurable Power
48 kW / 48 kVA
Nominal Output Voltage
230V, 400V 3PH
Output Voltage Note
Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage
Efficiency at Full Load
95.0%
Output Voltage Distortion
Less than 2%
Output Frequency (sync to mains)
50/60 Hz +/- 3 Hz user adjustable +/- 0.1
Other Output Voltages
380, 400, 415
Crest Factor
Unlimited
Topology
Double Conversion Online
Waveform Type
Sine wave
Output Voltage Tolerance
+/-1% static and +/- 5% at 100% load step
Output Voltage THD
< 2% for 0 to 100% linear load and < 6% for full non linear load
Overload Operation
10 minutes @ 125% and 60 seconds @ 150%
Efficiency at Half Load
95.0%
Required Output Current Protection
100A
Bypass
Built-in Static Bypass

Input

Nominal Input Voltage
400V 3PH
Input Frequency
40 – 70 Hz
Input Connections
Hard Wire 5-wire (3PH + N + G)  
Input voltage range for main operations
340 – 477V
Other Input Voltages
380, 400, 415
Maximum Input Current
33A
Input Breaker Capacity
100  A
Maximum Short Circuit Withstand (Icw)
30.0 kA
Input Total Harmonic Distortion
Less than 5% for full load
Type of Input Protection Required
gL fuse

Batteries & Runtime

Battery Type
VRLA
Included Battery Modules
2
Available Battery Module Slots
2
Typical recharge time
3 hour(s)
RBC™ Quantity
4
Nominal Battery Voltage
+/-192 V (split battery referenced to neutral)
End of Discharge Battery Voltage
+/-154 V
DC Overcurrent Protection
504A
Maximum Available Short Circuit Current
1 kA
Efficiency in Battery Operation
94.00%
End of Discharge Maximum Battery Current
55
Overload Operation
10 minutes @ 125% and 60 seconds @ 150%
SKU: SY16K48H-PD Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “APC Symmetra PX All-In-One 16kW Scalable to 48kW, 400V”

There are no reviews yet.