04 3550600 052 7036860

Ashly ne8250PE 8-Channel Network Enabled Amplifier w/ DSP (8 x 250W @ 4 Ohms)

Add to Wishlist
Key Features
  • Integrated Ethernet Control
  • Normal/Bridge Modes
  • Euroblock Inputs
  • Protection Circuitry
  • Expansion Modules Available

د.إ20,299.00

Add to Wishlist

The ne8250PE from Ashly is a professional-quality 8-channel power amplifier with Ethernet capability designed for installed applications. Housed in a robust 2RU enclosure, this highly-efficient amplifier uses standard Euroblock input and output connectors, allowing it to connect to practically any 4 or 8 Ohm system.

The ne8250PE has an Ethernet port, which offers Ethernet control and monitoring of the amplifier functions using the Proteane software. It also has a normal/bridge switch, allowing you to switch the amplifier into Bridge Mode. Other features include a wide complement of protection circuitry, remote level control, and the ability to expand the unit’s capability via optional expansion modules.

This PE model offers internal DSP processing, which allows each input channel to be configured with pluggable DSP blocks for dynamic control, gain functions, graphic and/or parametric EQ, time delay, and more. A mixer section with assignable routing gives you the option to drive any or all output from any input channel. The amplifier outputs have the same DSP benefits as the inputs, with the addition of automated crossover setup.

Professional Quality
The rugged 2RU enclosure fits in any standard equipment rack
Multichannel
The amplifier provides 8 channels of audio I/O
Ethernet Control
The built-in Ethernet port gives you the ability to control and monitor amplifier functions over a network using the Proteane software
Connectivity
Standard Euroblock input and output connectors provide wide compatibility with 4 and 8 Ohm systems
Bridge Mode
The amplifier can be switched between Normal and Bridge modes if desired
Protection Circuitry
Built-in protection circuitry guards against damage from overheating and overcurrent
LED Displays
Multiple LED displays show the status of signal, power, standby, protect, power switch disable, and comm activity
Remote Features
In addition to software control, the amplifier also has connections for remote standby and remote level control
DSP
The integrated DSP features, along with the Proteane software, allow you to configure each input for dynamics control, gain functions, graphic and/or parametric EQ, high and low pass filters, time delay, metering, and test signal generator. A mixer section lets you assign routing to deliver any input to any and all outputs. The outputs have the same DSP functions as the inputs, as well as an automated crossover setup. Up to 35 presets and sub presets can be set for storage and retrieval of global parameters
Optional Expansion
Multiple expansion modules are available for adding additional functionality, such as DSP, AES/EBU connectivity, mic inputs, or CobraNet networking
SKU: NE8250PE Category: Tag:

Ashly ne8250 Specs

Power Rating
150W/Channel @ 8 Ohms
250W/Channel @ 4 Ohms
500W @ 8 Ohms Bridge Mode
Damping Factor
> 250
Input Level
+21dB
Input Impedance
20 kOhms, Balanced
Gain
-50 to +12dB
Frequency Response
20Hz – 20kHz
Signal-to-Noise Ratio
> 98dB
Total Harmonic Distortion (THD)
< 0.5%
Input Connections
8 x Euroblock Inputs
1 x Ethernet Port
1 x Remote Standby Contact
1 x Preset Recall Connector
1 x Data Connector
1 x Remote Level Control Connector
1 x AC Power Input
Output Connectors
8 x Euroblock Outputs
Controls Front Panel
1 x Power Switch
8 x Channel Attenuator Knobs
Controls Rear Panel
1 x Normal/Bridge Switch
Indicators
1 x Power LED
1 x Standby LED
1 x Protect LED
1 x Power Switch Disable LED
1 x Comm LED
4 x LED Level Meters
4 x LED Temperature Meters
4 x LED Current Meters
Cooling
Front-to-Rear Airflow
Dimensions
19 x 3.5 x 15.5″ (483 x 89 x 394mm)
Weight
21 lbs (9.5kg)
Packaging Info
Package Weight
19 lb
Box Dimensions (LxWxH)
30 x 16 x 4″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Ashly ne8250PE 8-Channel Network Enabled Amplifier w/ DSP (8 x 250W @ 4 Ohms)”

There are no reviews yet.

Related products