Ashly SRA Series SRA-4150 Convection-Cooled 4-Channel Power Amplifier


Key Features
  • 150W per Channel at 8 Ohms
  • 4-Channel Operation
  • Convection Cooled, Class-D Amp
  • Extremely Low Noise
  • Protection Circuitry
  • Level Attenuators for Each Channel
  • Selectable Input Sensitivity
  • Euroblock Inputs/Outputs
  • Alert Status LEDs
  • Remote Stand-By Control

د.إ5,299.00

TheĀ SRA Series SRA-4150 Convection-Cooled 4-Channel Power AmplifierĀ fromĀ AshlyĀ is a 4-channel convection-cooled rackmount P.A. or studio power amplifier housed in a rugged 1-RU metal chassis designed to drive 4 and 8 Ohms loads. The amp offers an output of 80 W per channel at 8 Ohms and 140 W per channel at 4 Ohms.

The SRA-4150 incorporates a switch-mode-power supply and Class-D amplifier circuitry, providing a power-efficient solution. The low-noise unit features a switchable HPF filter and selectable gain sensitivity, turn-on delay DIP switches with up to 8 seconds of delay available, and dual or bridged modes of operation.

The SRA-4150 is equipped with an internally switchable 120V/240V power supply, extensive protection circuitry, and standard Euroblock inputs along with screw terminal outputs.

1-RU 10 lb lightweight rackmount 4-channel power amplifier with 80 Watts per channel power output at 8 Ohms
Selectable Dual or Bridge Mono Operation, designed for 4- or 8-Ohm loads
2-stage high-efficiency switched mode power supply with high power-to-weight ratio
Ultra-quiet convection-cooled operation
On-board 80Hz HPF, selectable gain sensitivity
Up to 8 sec. of turn-on delay with selectable dip switch complement
Comprehensive amplifier protection circuitry includes: output over-current, DC output, main supply rail over-voltage, chassis temperature, inrush iimiting, mains fuse
Front panel indicators include overall power, standby, and protect, along with per-channel clip and signal indicators
Euroblock input connectors, screw terminal outputs
SKU: SRA-4150 Category: Tag:
Key Specs
Number of Channels
4
Amplifier Power Rating
8 Ohms:
4x 80 W per Channel
4x 300 W Bridged
4 Ohms:
4x 150 W per Channel
Analog Audio I/O
4x Block 3-Pin Input
4x Screw Terminal Output
Amplifier Power Rating
8 Ohms:
4x 80 W per Channel
4x 300 W Bridged
4 Ohms:
4x 150 W per Channel
Amplifier Class
Class-D
Performance
Protections
On/Off Muting
Frequency Response
20 Hz to 20 kHz ±1 dB
Damping Factor
> 200 at 8 Ohms
Input Sensitivity
+1 dBu or +4 dBu
Input Impedance
20 Kilohms (Balanced)
Max Gain
36 dB
SNR
> 103 dB
THD
8 Ohms:
< 0.5% (Full Range, at Rated Power -10 dB)
Signal Processing
Filters
2x High-Pass:
80 Hz
Connectivity
Analog Audio I/O
4x Block 3-Pin Input
4x Screw Terminal Output
Power
Current Consumption
102 mA (Standby)
660 mA (Idle)
1.95 A (1/8 Power, Typical)
3.8 A (1/3 Power, Max)
Power Consumption
4 Ohms:
150 W (1/8 Power)
Physical
Display & Indicators
1x Blue LED (Power)
1x Yellow LED (Standby)
1x Red LED (Protect)
4x Red LED (Clip)
4x Green LED (Signal)
Cooling
Convection
Dimensions
19.0 x 1.8 x 11.0″ / 483.0 x 45.5 x 279.4Ā mm
Weight
9.5Ā lb / 4.3Ā kg
Packaging Info
Package Weight
13 lb
Box Dimensions (LxWxH)
24.5 x 17.8 x 4.75″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Ashly SRA Series SRA-4150 Convection-Cooled 4-Channel Power Amplifier”

There are no reviews yet.