04 3550600 052 7036860

AVPro Edge MXNet 1G Wall Plate Encoder Device

Add to Wishlist
Key Features
  • 1G Maximum Data Rate
  • Bandwidth Management via MXNet MENTOR
  • Supports Cat 5e or Better
  • Fits in Standard Dual-Gang Mud Rings

AED5,799.00

Add to Wishlist

This AVPro Edge MXNet 1G Wall Plate Encoder Device is an AV over IP encoder device that fits into any standard dual-gang mud ring. Connect this MXNet wall plate to any HDMI source and it will encode the audio/video signal into a multicast data format that can be routed to any Decoder endpoint within the project/installation. This device connects directly via category cable (CAT 5e or better) to any MXNet switch. The AC-MXNET-1G-EWP is a part of the MXNet family of AV-over-IP products from AVPro Edge.

The AC-MXNET-1G-EWP will encode a full 4K 4:4:4 60 Hz HDMI video signal along with audio, control, power, and HDR metadata. These signals are passed to single or multiple decoder endpoints via multicast routing through an MXNet or multicast compatible L3 managed network switch. It does all this with next to zero latency. MXNet Encoders encode audio/video/control signals into IP packets using an optimized JPEG2000 codec at a flexible data rate (200 Mb/s for 1080p content, 300 Mb/s for 4K30 content, 850 Mb/s at peak).

JPEG 2000
JPEG 2000 is the obvious and essential video encoding choice when picture quality is critical. JPEG 2000 supports progressive decoding and delivers both lossy and lossless compression within a code stream. JPEG 2000 supports genlock, so that the frames of a video source are synced to all decoders, resulting in tear-free video walls. JPEG 2000 enables the handling of color-space information, 10-bit color, and it supports interactivity in networked applications.
Full External Light Control
Our integrators pride themselves on their work, so don’t let a small blue, green, red, or yellow light ruin your perfectly engineered viewing room. When you install an encoder in a discreet location, you have the option to turn off all the lights on the device—including network link lights—as well as the Data Window OLED light. This allows you to install the encoder, and once you know everything is working, eliminate any light outputted from the device. This way, the end-user will never even know it’s there.
Control Signal Routing
Both RS-232 and IR signals can be direct routed through the AC-MXNET-1G-E encoder. When you route these signals through a network switch, you can specify either single or multiple decoders to receive these control signals.
USB and KVM Support
Each encoder unit has a USB-B host connection. This allows you to connect and route any connected USB signals to a decoder device. Use the MXNet mentor software to specify the host encoder and the upstream USB device connected to the selected decoder.
SKU: AC-MXNET-1G-EWP Category: Tag:

AVPro Edge MXNET-1G Specs

Video Inputs
1x HDMI (2.0)
1x DE-15/DB-15 (VGA)
Audio Inputs
1x 1/8″ / 3.5 mm TRS
Audio Outputs
No
Other I/O
1x RJ45 LAN
1x 1/8″ / 3.5 mm RS-232 Input/Output
Expansion Slots
No
Input Audio Format
Analog
Embedded Audio
HDMI
Standards
HDR Support
,
Power
Power I/O
1x RJ45 Input
PoE Support
PoE 802.3af
Environmental
Operating Temperature
23 to 125°F / -5 to 51°C
Storage Temperature
-4 to 140°F / -20 to 60°C
Operating Humidity
5 to 90% ()
General
Dimensions
3.4 x 2.6 x 1.9″ / 87 x 67 x 47 mm
Weight
18.7 oz / 530 g

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “AVPro Edge MXNet 1G Wall Plate Encoder Device”

There are no reviews yet.

Related products