C9120AXI-Z Specification
|
Description |
Cisco Catalyst 9120AX Access Point, internal antennas; Wi-Fi 6; 4×4:4 MIMO, Z Domain |
Software |
āĀ Ā Cisco Unified Wireless Network Software Release 8.9.x or later
āĀ Ā Cisco IOS ® XE Software Release 16.11 with AP Device Pack, or later |
Supported wireless LAN controllers |
āĀ Ā Cisco Catalyst 9800 Series Wireless Controllers
āĀ Ā Cisco 3500, 5520, and 8540 Series Wireless Controllers and Cisco Virtual Wireless Controller |
802.11n version 2.0 (and related) capabilities |
āĀ Ā 4×4 MIMO with four spatial streams
āĀ Ā Maximal Ratio Combining (MRC)
āĀ Ā 802.11n and 802.11a/g beamforming
āĀ Ā 20- and 40-MHz channels
āĀ Ā PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
āĀ Ā Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
āĀ Ā 802.11 Dynamic Frequency Selection (DFS)
āĀ Ā Cyclic Shift Diversity (CSD) support |
802.11ac |
āĀ Ā 4×4 downlink MU-MIMO with four spatial streams
āĀ Ā MRC
āĀ Ā 802.11ac beamforming
āĀ Ā 20-, 40-, 80-, and 160-MHz channels
āĀ Ā PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz)
āĀ Ā Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
āĀ Ā 802.11 DFS
āĀ Ā CSD support |
802.11ax |
āĀ Ā 4×4 downlink MU-MIMO with four spatial streams
āĀ Ā Uplink/downlink OFDMA
āĀ Ā TWT
āĀ Ā BSS coloring
āĀ Ā MRC
āĀ Ā 802.11ax beamforming
āĀ Ā 20-, 40-, 80-, and 160-MHz channels
āĀ Ā PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)
āĀ Ā Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
āĀ Ā 802.11 DFS
āĀ Ā CSD support |
Integrated antenna |
Flexible radio (either on 2.4GHz or on 5GHz)
āĀ Ā 2.4 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth
āĀ Ā 5 GHz, peak gain 5 dBi, internal antenna, omnidirectional in azimuth
Dedicated 5GHz radio
āĀ Ā 5 GHz, peak gain 4 dBi, internal antenna, omnidirectional in azimuth |
External antenna (soldĀ separately) |
āĀ Ā Cisco Catalyst 9120E Access Points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
āĀ Ā Cisco Catalyst 9120P Access Points) are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz) with the AIR-ANT2513-P4M-N= antenna
āĀ Ā Cisco offers the industry’s broadest selection ofĀ antennas, delivering optimal coverage for a variety of deployment scenarios
āĀ Ā Supports Self-Identifiable Antennas (SIA) on one RP-TNC port |
Smart Antenna Connector |
āĀ Ā Available on the 9120E and on the 9120P only
āĀ Ā Compact multi RF connector with DART interface
āĀ Ā Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector when used with antennas with RP-TNC connector
āĀ Ā Required when running the flexible radio as either a second 5-GHz serving radio or a Wireless Security Monitoring radio |
Interfaces |
āĀ Ā 1x 100, 1000, 2500 Multigigabit Ethernet (RJ-45) ā IEEE 802.3bz
āĀ Ā Management console port (RJ-45)
āĀ Ā USB 2.0 @ 3.75W (enabled via future software) |
Indicators |
āĀ Ā Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
Dimensions (WĀ xĀ LĀ xĀ H) |
āĀ Ā Access point (without mounting brackets): C9120I: 8.5 x 8.5 x 1.7ā (21.6 x 21.6 x 4.3 cm) |
Input power requirements |
āĀ Ā 802.3at Power over Ethernet Plus (PoE+), 802.3bt Cisco Universal PoE (Cisco UPOE+, Cisco UPOEĀ Ā®)
āĀ Ā Cisco power injector, AIR-PWRINJ6=
āĀ Ā 802.3af PoE
āĀ Ā Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) |
Environmental |
Cisco Catalyst 9120AXI
āĀ Ā Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
āĀ Ā Nonoperating (storage) altitude test: 25ĖC, 15,000 ft.
āĀ Ā Operating temperature: 32° to 122°F (0° to 50°C)
āĀ Ā Operating humidity: 10% to 90% (noncondensing)
āĀ Ā Operating altitude test: 40ĖC, 9843 ft. |
System memory |
āĀ Ā 2048 MB DRAM
āĀ Ā 1024 MB flash |
Available transmit power settings |
2.4 GHz
āĀ Ā 23 dBm (200 mW)
āĀ Ā 20 dBm (100 mW)
āĀ Ā 17 dBm (50 mW)
āĀ Ā 14 dBm (25 mW)
āĀ Ā 11 dBm (12.5 mW)
āĀ Ā 8 dBm (6.25 mW)
āĀ Ā 5 dBm (3.13 mW)
āĀ Ā 2 dBm (1.56 mW)
āĀ Ā -1dBm (0.79mW)
āĀ Ā -4dBm(0.39mW)
5 GHz
āĀ Ā 26 dBm (400 mW)
āĀ Ā 23 dBm (200 mW)
āĀ Ā 20 dBm (100 mW)
āĀ Ā 17 dBm (50 mW)
āĀ Ā 14 dBm (25 mW)
āĀ Ā 11 dBm (12.5 mW)
āĀ Ā 8 dBm (6.25 mW)
āĀ Ā 5 dBm (3.13 mW)
āĀ Ā 2 dBm (1.56 mW)
āĀ Ā -1dBm (0.79mW) |
Frequency band and 20-MHz operating channels |
Z (Z regulatory domain):
ā 2.412 to 2.462 GHz; 11 channels
ā 5.180 to 5.320 GHz; 8 channels
ā 5.500 to 5.700 GHz; 8 channels
(excludes 5.600 to 5.640 GHz)
ā 5.745 to 5.825 GHz; 5 channels |
There are no reviews yet.