Cisco AIR-AP1815W-B-K9 Wireless Access Point


Interface Types:Ā Ethernet RJ45

Encryption/SED Supported

Electrical Interface:Ā Ethernet Gigabit – 1Gbps

On-Board Cache:Ā 1GB

د.إ1,199.00

Cisco 1815W Aironet AIR-AP1815W-B-K9 PoE Wireless Access Point – Brand New

Cisco 1815W Aironet AIR-AP1815W-B-K9 PoE Wireless Access Point – Brand New

Cisco Aironet 1815w Access Point
With a sleek design and small form factor, the Cisco Aironet 1815w Access Point brings a full slate of Cisco high-performance functionality to multiple-dwelling-unit deployments.

Product Overview
The CiscoĀ® AironetĀ® 1815w
Ā Access Point offers a compact, wall plateā€“mountable access point, ideal for hospitality, cruise ships, residential halls, or other multiple-dwelling-unit deployments.

Packing 802.11ac Wave 2 wireless standards support and Gigabit Ethernet wired connectivity into a sleek device, the 1815w is built to take full advantage of existing cabling infrastructure while blending into the visual footprint. This combination provides best-in-class performance while reducing total cost of ownership.

Features and Benefits
By adhering to the 802.11ac Wave 2 standard, the 1815w provides a data rate of up to 867 Mbps on its 5-GHz radio. This exceeds the data rates offered by access points that support the 802.11n standard. It also enables a total aggregate dual-radio data rate of up to 1 Gbps. This provides the necessary foundation for enterprise and service provider networks to stay ahead of the performance expectations and needs of their wireless users.

In recent years corporate users have increasingly preferred wireless access as their form of network connectivity, due to its convenience. With this shift, there is an expectation that wireless should not slow down usersā€™ day-to-day activities, but should enable a high-performance experience while allowing users to move about freely. The 1815w delivers industry-leading performance with highly secure and reliable wireless connections that provide a robust, mobile end-user experience.

SKU: AIR-AP1815W-B-K9 Category:
Cisco Aironet 1815W PoE Access Point
Model Number AIR-AP1815W-B-K9
Authentication and security
  • Advanced Encryption Standard (AES) for Wi-Fi Protected Access 2 (WPA2)
  • 802.1X, RADIUS authentication, authorization and accounting (AAA)
  • 802.11r
  • 802.11i
Software
  • Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.5 or later
  • Cisco Mobility Express
Maximum clients Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point
802.11ac
  • 2×2 single-user/multiuser MIMO with two spatial streams
  • Maximal ratio combining (MRC)
  • 20-, 40-, and 80-MHz channels
  • PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz)
  • Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx)
  • 802.11 Dynamic Frequency Selection (DFS)
  • Cyclic shift diversity (CSD) support
Ethernet ports
  • Authentication with 802.1X or MAC filtered
  • Dynamic VLAN or per port
  • Traffic locally switched or tunneled back to wireless LAN controller
Bluetooth (future Availability)
  • Integrated Bluetooth 4.1 (including BLE) radio
  • Maximum transmit power: 4 dBm
  • Antenna gain: 2 dBi
Data rates supported
  • 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
  • 802.11b/g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps
  • 802.11n data rates on 2.4 GHz
  • 802.11ac data rates on 5 GHz
Integrated antennas
  • 2.4 GHz, gain 2 dBi
  • 5 GHz, gain 3 dBi
Interfaces
  • 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE)
  • Management console port (4-pin connector)
  • Three 10/100/1000BASE-T ports (local Ethernet ports), including one PoE out port:
    PoE out provides 802.3af (class 0) when access point is powered by 802.3at, or no output when powered by 802.3af
  • One passive pass-through port RJ-45 (back to bottom)
Indicators Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions (W x L x H) Access point (without mounting bracket): 3.5 x 5.5 x 1.25 in (89 x 140 x 31.5 mm)
Weight Access point without mounting bracket or any other accessories: 10 oz (280 g)
Environmental Operating

  • Temperature: 32Ā° to 104Ā°F (0Ā° to 40Ā°C)
  • Humidity: 10% to 90% (non-condensing)
  • Max. altitude: 9843 ft (3,000 m) @ 40Ā°C

Non-operating (storage and transportation)

  • Temperature: -22Ā° to 158Ā°F (-30Ā° to 70Ā°C)
  • Humidity: 10% to 90% (non-condensing)
  • Max. altitude: 15,000 ft (4,500 m) @ 25Ā°C
System
  • 1 GB DRAM
  • 256 MB flash
  • 710 MHz quad-core

 


ROHS Compliant

Weight:Ā 1.5Ā lb

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Cisco AIR-AP1815W-B-K9 Wireless Access Point”

There are no reviews yet.