04 3550600
052 7036860
Network Switches & Routers
Cisco Catalyst 6807-XL – switch – rack-mountable – with Cisco Supervisor Engine 2T (C6800-SUP6T), fan tray C6807-XL-S6T-BUN
Availability:
10 in stock
AED153,299.00
10 in stock
Cisco Systems Chassis+Fan Tray+ SUP6T+2x P/S IP Service
Overview
The Cisco Catalyst 6807-XL Modular Switch is ideally suited for enterprise core and aggregation environments and offers industry-leading Gigabit Ethernet, 10 Gigabit Ethernet, and 40 Gigabit Ethernet port densities while providing high levels of network resilience. The platform is also ready to support 100 Gigabit Ethernet.
The Cisco Catalyst 6807-XL Modular Switch is built on the Cisco Catalyst 6500 DNA. At FCS the switch will support all the features supported on the Cisco Catalyst 6500-E series switch.
High interface capacity
This switch scales to high-density Gigabit Ethernet, 10 Gigabit Ethernet, and 40 Gigabit Ethernet and configurations and it is capable of supporting 100 Gigabit Ethernet.
Standby fabric hot sync
Decreases the supervisor engine switchover time of supervisor engine 2T based systems to between 50 and 200 ms, depending on the modules being used.
Redundant control channel
Increases resiliency to protect against backplane control channel failures.
Redundant supervisor engine option
Increases availability by supporting a redundant supervisor engine.
Redundant power supply option
Provides N+1 power supply redundancy for increased availability.
Fan tray
It supports the hot-swappable fan tray. The variable speed fans in the fan tray can handle individual fan failures (N+1 redundancy) and still provide sufficient cooling to the chassis.
Side-to-side airflow
Consistent with existing Cisco Catalyst 6500 series chassis to allow easy upgrades.
AC power supply
Supports up to 4 AC power supplies, which can be added incrementally as the system requirements grow. Power supplies support both 110 volt and 220 volt inputs.
Network equipment building standards layer 3 (NEBS L3) compliant
Specifications
General
| Device Type | Switch – with Cisco Supervisor Engine 2T (C6800-SUP6T), fan tray |
| Enclosure Type | Rack-mountable 10U |
| Ports | 8 x 1 Gigabit / 10 Gigabit SFP+ + 2 x 40 Gigabit QSFP |
| Performance | Per-slot switching capacity: 880 Gbps IPv4 routing: 780 Mpps IPv6 routing: 390 Mpps Layer 2 bridging: 780 Mpps |
| Capacity | IPv4 routes (Multicast): 128000 IPv6 routes (Multicast): 128000 NetFlow entries: 512000 Virtual interfaces (VLANs): 4000 MAC addresses: 128000 ACL entries: 64000 Logical interfaces: 128000 |
| Jumbo Frame Support | 9216 bytes |
| Routing Protocol | IGMPv3, MLDv2, MPLS |
| Remote Management Protocol | SNMP, RMON |
| Features | Modular design, NAT support, VPN support, MPLS support, IGMP snooping, traffic shaping, IPv6 support, Non-Stop Forwarding (NSF), Stateful switchover (SSO), Weighted Random Early Detection (WRED), Access Control List (ACL) support, Quality of Service (QoS), MPLS VPN, Jumbo Frames support, Unicast Reverse Path Forwarding (URPF), Deficit Weighted Round Robin (DWRR), NetFlow, Virtual Routing and Forwarding (VRF), redundant hot swappable fans, Class of Service (CoS), IPFIX, Flexible NetFlow (FNF), Generic Routing Encapsulation (GRE), DiffServ Code Point (DSCP) support, MACsec support, In-Service Software Upgrade (ISSU), Virtual Private LAN Service (VPLS), Label Distribution Protocol (LDP), Instant Access (IA), Virtual Switching System (VSS), Sampled NetFlow, TrustSec support |
| Compliant Standards | IEEE 802.1x, IEEE 802.1ae |
| RAM | 4 GB DDR3 SDRAM |
| Flash Memory | 1 GB |
Expansion / Connectivity
| Interfaces | 1 x management RJ-45 1 x console (mini-USB) Type B 1 x serial RJ-45 1 x management SFP 8 x 10GBase-T SFP+ 2 x 40Gbit LAN QSFP |
| Expansion Slots | 7 (total) / 6 (free) x expansion slot |
| Installed Modules Qty (Max) | 1 (installed) / 7 (max) |
Power
| Power Device | Internal power supply – hot-plug |
| Installed Qty | 2 (installed) / 4 (max) |
| Power Redundancy | Yes |
| Power Redundancy Scheme | N+1 |
| Power Provided | 3000 Watt |
| Voltage Required | AC 120/230 V (50/60 Hz) |
Miscellaneous
| Compliant Standards | CISPR 22 Class A, EN55024, EN55022 Class A, EN50082-1, EN 61000-6-1, UL 60950-1 Second Edition, AS/NZS 3548 Class A, AS/NZS 60950, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, GR-1089-CORE, VCCI Class A, ETS 300 386 |
Software / System Requirements
| Software Included | Cisco IOS IP Services |
Dimensions & Weight
| Width | 17.4 in |
| Depth | 18.1 in |
| Height | 17.4 in |
Manufacturer Warranty
| Service & Support | Limited warranty – advance hardware replacement – 1 year – response time: 10 days |
Environmental Parameters
| Min Operating Temperature | 32 °F |
| Max Operating Temperature | 104 °F |
| Humidity Range Operating | 5 – 90% (non-condensing) |
| Min Storage Temperature | -4 °F |
| Max Storage Temperature | 149 °F |
| Humidity Range Storage | 5 – 95% (non-condensing) |
| General | |
|---|---|
| Capacity | IPv4 routes (Multicast): 128000 ¦ IPv6 routes (Multicast): 128000 ¦ NetFlow entries: 512000 ¦ Virtual interfaces (VLANs): 4000 ¦ MAC addresses: 128000 ¦ ACL entries: 64000 ¦ Logical interfaces: 128000 |
| Compliant Standards | IEEE 802.1x, IEEE 802.1ae |
| Device Type | Switch – with Cisco Supervisor Engine 2T (C6800-SUP6T), fan tray |
| Enclosure Type | Rack-mountable 10U |
| Features | Modular design, NAT support, VPN support, MPLS support, IGMP snooping, traffic shaping, IPv6 support, Non-Stop Forwarding (NSF), Stateful switchover (SSO), Weighted Random Early Detection (WRED), Access Control List (ACL) support, Quality of Service (QoS), MPLS VPN, Jumbo Frames support, Unicast Reverse Path Forwarding (URPF), Deficit Weighted Round Robin (DWRR), NetFlow, Virtual Routing and Forwarding (VRF), redundant hot swappable fans, Class of Service (CoS), IPFIX, Flexible NetFlow (FNF), Generic Routing Encapsulation (GRE), DiffServ Code Point (DSCP) support, MACsec support, In-Service Software Upgrade (ISSU), Virtual Private LAN Service (VPLS), Label Distribution Protocol (LDP), Instant Access (IA), Virtual Switching System (VSS), Sampled NetFlow, TrustSec support |
| Flash Memory | 1 GB |
| Jumbo Frame Support | 9216 bytes |
| Performance | Per-slot switching capacity: 880 Gbps ¦ IPv4 routing: 780 Mpps ¦ IPv6 routing: 390 Mpps ¦ Layer 2 bridging: 780 Mpps |
| Ports | 8 x 1 Gigabit / 10 Gigabit SFP+ + 2 x 40 Gigabit QSFP |
| RAM | 4 GB DDR3 SDRAM |
| Remote Management Protocol | SNMP, RMON |
| Routing Protocol | IGMPv3, MLDv2, MPLS |
| Dimensions & Weight | |
|---|---|
| Depth | 18.1 in |
| Height | 17.4 in |
| Width | 17.4 in |
| Environmental Parameters | |
|---|---|
| Humidity Range Operating | 5 – 90% (non-condensing) |
| Humidity Range Storage | 5 – 95% (non-condensing) |
| Max Operating Temperature | 104 °F |
| Max Storage Temperature | 149 °F |
| Min Operating Temperature | 32 °F |
| Min Storage Temperature | -4 °F |
| Expansion / Connectivity | |
|---|---|
| Expansion Slots | 7 (total) / 6 (free) x expansion slot |
| Installed Modules Qty (Max) | 1 (installed) / 7 (max) |
| Interfaces | 1 x management RJ-45 ¦ 1 x console (mini-USB) Type B ¦ 1 x serial RJ-45 ¦ 1 x management SFP ¦ 8 x 10GBase-T SFP+ ¦ 2 x 40Gbit LAN QSFP |
| Manufacturer Warranty | |
|---|---|
| Service & Support | Limited warranty – advance hardware replacement – 1 year – response time: 10 days |
| Miscellaneous | |
|---|---|
| Compliant Standards | CISPR 22 Class A, EN55024, EN55022 Class A, EN50082-1, EN 61000-6-1, UL 60950-1 Second Edition, AS/NZS 3548 Class A, AS/NZS 60950, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, GR-1089-CORE, VCCI Class A, ETS 300 386 |
| Power | |
|---|---|
| Installed Qty | 2 (installed) / 4 (max) |
| Power Device | Internal power supply – hot-plug |
| Power Provided | 3000 Watt |
| Power Redundancy | Yes |
| Power Redundancy Scheme | N+1 |
| Voltage Required | AC 120/230 V (50/60 Hz) |
| Software / System Requirements | |
|---|---|
| Software Included | Cisco IOS IP Services |
There are no reviews yet.