Cisco Catalyst WS-C2960S-24PS-L Stackable Ethernet Switch

DESCRIPTION

The Cisco Catalyst 2960S Series Switches are the leading layer 2 edge, providing improved ease of use, highly secure business operations, improved sustainability, and a borderless network experience. The Cisco Catalyst 2960S Series Switches include Cisco FlexStack switch stacking capability with 1 and 10 Gigabit connectivity. The Cisco Catalyst 2960S Series are fixed-configuration access switches designed for enterprise, midmarket, and branch OFFICE networks to provide lower total cost of ownership.

PRODUCT FEATURES

• Efficient switch operation
  Cisco Catalyst 2960S Series Switches, designed and engineered by Cisco, provide optimum power SAVING, low power operations for industry best-in-class power management, and power consumption capabilities. The Cisco Catalyst 2960S ports are capable of reduced power modes so that ports not in use can move into a lower power utilization state.
• Intelligent Power over Ethernet management
  The Cisco Catalyst 2960S PoE models support the PoE+ devices including Cisco IP phones and Cisco Aironet WLAN access points providing up to 30W of power per port, as well as any IEEE 802.3af-compliant end device.
• Enhanced quality of service
  The Cisco Catalyst 2960S Series Switches offers intelligent services that keep everything flowing smoothly. Industry-leading mechanisms for marking, classification, and scheduling deliver superior performance for data, voice, and video traffic, all at wire speed.

PRODUCT DETAILS
Device Type	Switch – 24 ports – MANAGED
Enclosure Type	Rack-mountable 1U
Interfaces	Gigabit Ethernet
Ports	24 x 10/100/1000 (PoE) + 4 x SFP
Power Over Ethernet (PoE)	PoE
Performance	Switching capacity : 176 Gbps Forwarding performance (64-byte packet size) : 41.7 Mpps
MAC Address Table Size	8K entries
Remote MANAGEMENT Protocol	SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3at
Power	AC 120/230 V ( 50/60 Hz )
Dimensions (WxDxH)	44.5 cm x 38.6 cm x 4.5 cm
Weight	5.77 kg
Manufacturer Warranty	Limited lifetime warranty

WS-C2960S-24PS-L Specifications
General Information
Device Type	Switch – 24 ports – Managed
Enclosure Type	Rack-mountable – 1U
Ports	24 x 10/100/1000 + 4 x SFP
Power Over Ethernet (PoE)	PoE
Performance	Switching capacity : 176 Gbps ¦ Forwarding performance (64-byte packet size) : 41.7 Mpps
MAC Address Table Size	8K entries
Remote MANAGEMENTProtocol	SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH
Encryption Algorithm	SSL
Authentication Method	Secure Shell (SSH), RADIUS, TACACS+
Features	Layer 2 switching, auto-sensing per device, dynamic IP address assignment , power over Ethernet (PoE), auto-negotiation, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port AGGREGATION Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), PoE+, Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification, Remote Switch Port Analyzer (RSPAN)
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3at
RAM	128 MB
Flash Memory	64 MB Flash
Status Indicators	Port status, link ACTIVITY, port transmission speed, port duplex mode, power, system
Expansion / Connectivity
Interfaces	24 x 10Base-T/100Base-TX/1000Base-T – RJ-45 – PoE ¦ USB : 1 x 4 PIN USB Type A ¦ 1 x console – mini-USB Type B – MANAGEMENT ¦ 1 x console – RJ-45 – management ¦ 1 x 10Base-T/100Base-TX – RJ-45 – management ¦ 4 x SFP (mini-GBIC)
Expansion Slot(s)	1 (total) / 1 (free) x Stacking Module
Power
Power Device	Power supply – internal
Voltage Required	AC 120/230 V ( 50/60 Hz )
Power Consumption Operational	55 Watt
Miscellaneous
Width	44.5 cm
Depth	38.6 cm
Height	4.5 cm
Weight	5.77 kg
Rack Mounting Kit	Optional
MTBF	245,604 hour(s)
Compliant Standards	TUV GS, CISPR 22 Class A, GOST, BSMI CNS 13438 Class A, CISPR 24, NOM, VCCI Class A ITE, EN55024, CB, EMC, MIC, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, RoHS, CSA C22.2 No. 60950-1, FCC Part 15 B Class A
Software / System Requirements
Software Included	Cisco IOS LAN Base
Service & Support	Limited lifetime warranty
Service & Support Details	Limited warranty – replacement – lifetime – response time: next business day ¦ Limited warranty – power supply and fans – 5 years ¦ New releases update
Environmental Parameters
Min Operating Temperature	-5 °C
Max Operating Temperature	40 °C
Humidity Range Operating	10 – 95% (non-condensing)
Min Storage Temperature	-25 °C
Max Storage Temperature	70 °C
Humidity Range Storage	10 – 95% (non-condensing)