Cisco Router High-Speed WAN Interface card 2 port channelized T1/E1, and PRI HWIC

Availability:

30 in stock


AED8,499.00

30 in stock

Cisco Router High-Speed WAN Interface card 2 port channelized T1/E1, and PRI HWIC

 

The CiscoĀ Channelized T1/E1 and ISDN PRI High-Speed WAN Modules combine multiple T1/E1 WAN connectivity-Channelized T1/E1 and ISDN Primary Rate Interface (PRI), in the same card. Applications include fractional or full T1/E1 WAN connectivity, ISDN PRI for primary WAN link or WAN backup, and dial access aggregation. With flexible WAN connectivity options, together with integrated routing, security, voice, and wireless capabilities, the Cisco Integrated Services Routers can meet every need of enterprise-class branch offices today and in the future. Three versions are available, 1- and 2-port cards in a single-wide high-speed WAN interface card (HWIC), and a 8-port cards in a single-wide network module. The different versions help enable customers to deploy different port densities according to the needs of individual offices.

The modules can be used in T1 or E1 networks, selectable by software configuration. The integrated channel service unit/data service unit (CSU/DSU) function allows customers to consolidate customer premises equipment (CPE). TheĀ modules support balanced and unbalanced E1 connectivity and conform to the G.703 and G.704 standards for unframed and framed E1 modes. The Channelized T1/E1 and ISDN PRI modules work with the digital modem module in the Cisco 2800, 2900, 3800, and 3900 Series Integrated Services Routers to provide V.90- and V.92-compliant digital dial access aggregation.

The 1- and 2-port Channelized T1/E1 and ISDN PRI HWICs are updated versions of the E1/T1 ISDN PRI network modules, with the same functions and performance in a compact form factor of HWIC. You can save the network module slots for other LAN/WAN connectivity, and your deployment flexibility is greatly enhanced.

• 1, 2, or 8 ports of RJ-48

• Cisco IOSĀ Software configurable for T1 or E1 operation

• Integrated CSU/DSU per port

• Fractional T1/E1 (n x DS-0) or full T1/E1

• Balanced or unbalanced E1 termination in the same module

• E1 unframed and framed modes (G.703 or G.704)

• Interoperable with Cisco digital modem modules PVDM2-12DM, PVDM2-24DM, and PVDM2-36DM (HWIC-1CE1T1-PRI and HWIC-2CE1T1-PRI modules only)

• Support for Multilink Point-to-Point Protocol (PPP) and Multilink Frame Relay (FRF.16)

• PRI for data

Ā 

Cisco 1 Port Channelized T1/E1 and ISDN PRI High Speed WAN Interface Card (HWIC-1CE1T1-PRI)

Manufacturer Cisco
Part Number HWIC-1CE1T1-PRI
Device Type

Expansion module

Form factor Plug-in module
Interfaces/Ports 1 x RJ-48C Channelized E1/T1/ISDN-PRI
Data Transfer Rate 1.54 Mbps T1

2.05 Mbps E1

Management Features
Diagnostic Loopback Support E1 loopback modes:

Controller local loopback

Interface local loopback

T1 loopback modes

Interface local loopback

Interface remote loopback

Controller local loopback

Controller remote loopback

CSU loopback modes for T1 CSU

Data terminal equipment (DTE) loopback

Network loopback

Payload loopback

Alarm Detection Yellow Alarm-Receive/Send from/to network

Blue Alarm-Receive alarm indication signal (AIS) from network

Red Alarm-Loss of network signal

Relevant MIB Support T1 MIB (RFC1406-MIB)

Cisco Integrated DSU/CSU MIB (CISCO-ICSUDSU-MIB)

Remote Management Cisco CNS 2100 Series Intelligence Engine (IE2100)

CiscoWorks

Signaling Debugging ISDN Q.921 and Q.931 decode

All other previously existing applicable Cisco IOS Software debugs

Hardware Specifications

Dimensions (H x W x D) HWIC-2CE1T1-PRI: 0.75 x 3.08 X 4.74 in. (1.91 x 7.82 x 12.04 cm)
Weight HWIC-2CE1T1-PRI: 0.19 lb (0.09 kg)
Operating Temperature 32 to 104°F (0 to 40°C)
Nonoperating Temperature -40 to 158° F (-40 to 70°C)
Relative Humidity 5-95% noncondensing
Ports 1, 2, or 8 T1/E1 ports on RJ-48C connectors
Line Bit Rate (per Port) E1: (2.048 Mbps)

T1: (1.544 Mbps)

Line Coding E1: High-density bipolar three (HDB3)

T1: Alternate mark inversion (AMI) and binary 8-zero substitution (B8ZS)

Framing Formats E1: CRC4

T1: Super Frame (SF) and Extended Super Frame (ESF)

Output Levels E1: short-haul/long-haul

T1 (line build-out [LBO]): 0, -7.5, or -15 dB

Regulatory Compliance and Safety
Telecom compliance FCC Part 68, TIA-968A, Industry Canada CS-03, TBR 4, TBR 12, TBR 13, AS/ACIF S038, AS/ACIF S016, JATA Gray Book, HKTA 2027, HKTA 2015, IS6100, IDA TS ISDN PRA, MIC NO.2004-15
Telecommunication Interface Industry Standards ITU-T G.703, G.704, G.706, G.823, and ANSI T1.403
Safety UL60950, C22.2 No.60950, EN60950, AS/NZS3260 and TS001, IEC60950
Network Equipment Building Standards (NEBS) GR-63, GR-78, and GR-1089-CORE Type 1/3
EMC Emissions and Immunity 47 CFR Part 15: 2005

CISPR22: 2005

EN300386: V1.3.3: 2005

EN55022: 1994 [+ amd 1 & 2]

EN55022: 1998

EN61000-3-2: 2000 [Inc amd 1 & 2]

EN61000-3-3: 1995 [+ amd 1: 2001]

ICES-003 Issue 4: 2004

KN 22: 2005

VCCI: V-3/2006.04

CISPR24: 1997 [+ amd 1 & 2]

EN300386: V1.3.3: 2005

EN50082-1: 1992

EN50082-1: 1997

EN55024: 1998 [+ amd 1 & 2]

EN61000-6-1: 2001

 

SKU: HWIC-2CE1T1-PRI Category: Tags: , ,
Weight 0.09 kg

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Cisco Router High-Speed WAN Interface card 2 port channelized T1/E1, and PRI HWIC”

There are no reviews yet.