Cisco WS-C3650-48TD-L Catalyst 48-Port Ethernet Switch


Interface Types:Ā Ethernet RJ45, SFP

Electrical Interface:Ā Ethernet Gigabit – 1Gbps

On-Board Cache:Ā 4GB

Bays/Ports/Slots:Ā 48

U Height:Ā 1U

Wattage/VA:Ā 250W

Voltage:Ā 110-240V Multi

Color:Ā Black

AED24,999.00

Cisco WS-C3650-48TD-L Catalyst 3650 Series 48-Port plus 2 x 10Gb SFP+ Ethernet Switch with LAN Base feature set – Brand New

Cisco WS-C3650-48TD-L Catalyst 3650 Series 48-Port Standalone Ethernet Switch with 2 x 10 Gigabit SFP Ports & LAN Base Feature Set – Brand New

Cisco Catalyst 3650 Series Switches

The CiscoĀ® CatalystĀ® 3650 Series is the next generation of enterprise-class standalone and stackable access-layer switches that provide the foundation for full convergence between wired and wireless on a single platform. The 3650 Series is built on the advanced Cisco StackWiseĀ®-160, and takes advantage of the new Cisco Unified Accessā„¢ Data Plane (UADP) application-specific integrated circuit (ASIC). This switch can enable uniform wired-wireless policy enforcement, application visibility, flexibility, application optimization, and superior resiliency. The 3650 Series switches support full IEEE 802.3at Power over Ethernet Plus (PoE+), Cisco Universal Power over Ethernet (Cisco UPOEĀ®) on the Cisco Catalyst 3650 Series multigigabit switches, and offer modular and field-replaceable redundant fans and power supplies. The 3650 Series switches also come in a 12-inch lower depth form factor so that you can deploy them in tight wiring closets in remote branches and offices where depth of the switch is a concern. In addition, the 3650 multigigabit switches support current and next-generation wireless speeds and standards (including 802.11ac Wave 2) on existing cabling infrastructure. The 3650 Series switches help increase wireless productivity and reduce TCO.

Cisco IOS Software Feature Set Differences
Functions LAN Base IP Base IP Services
Layer 2+ Enterprise access Layer 2

Wide range of Layer 2 access features fo renterprise deployments support Cisco StackPower

Complete Access Layer 2

Supports all Cisco Catalyst 2000 and Cisco Catalyst 3000 Layer 2 features, including hot standby protocols

Complete Access Layer 2

Supports all Cisco Catalyst 2000 and Cisco Catalyst 3000 Layer 2 features, including hot standby protocols

Layer 3 Static IP routing support

Support for SVI

Enterprise access Layer 3

RIP, EIGRP stub, OSPF for routed access, PBR, IPv4 & IPv6 EIGRP stub routing, WCCP, IPV6 uRPF, IPV6 PBR, VRRPv3, Policy Classification Engine, HSRP v6

Complete access Layer 3

OSPF, EIGRP, BGP, IS-IS

VRF-lite

Multicast IGMP IPV4 & IPV6 PIM routing IPV4 & IPV6 PIM routing
Mobility Supports Cisco Unified Wireless Networking mobility architecture Supports Cisco Converged Access mobility architecture with CAPWAP termination at the access Supports Cisco Converged Access mobility architecture with CAPWAP termination at the access
Manageability Basic manageability

Support for a wide range of MIBs, IPSLA Responder, and RSPAN, PnP, Autoconf, Interface Templates, Secure CDP

Enterprise access Layer 3, Flexible NetFlow for wired and wireless traffic

EEM, GOLD-Lite, and Smart Install Director

Enterprise access Layer 3, Flexible NetFlow for wired and wireless traffic

EEM, GOLD-Lite, and Smart Install Director

Security Enterprise access security

DHCP Snooping, IPSG, DAI, PACLs, Cisco Identity 4.0, NAC and 802.1x features

Complete access security

Router and VLAN ACLs, private VLANs, complete identity and security; Cisco TrustSecĀ® SXP and IEEE 802.1AE capable in hardware, Device Sensor

Complete access security

Router and VLAN ACLs, private VLANs, complete identity and security; Cisco TrustSecĀ® SXP and IEEE 802.1AE capable in hardware, Device Sensor

QoS Enterprise access security

Ingress policing, Trust Boundary, AutoQoS, and DSCP mapping

Complete access QoS

Support for all Cisco Catalyst 2000 and Cisco Catalyst 3000 QoS features, including per-VLAN policies

Complete access QoS

Support for all Cisco Catalyst 2000 and Cisco Catalyst 3000 QoS features, including per-VLAN policies

Interoperability Prime 2.1 Identity Services Engine (ISE 1.2/1.3), Mobility Services Engine (MSE 8.0), Improved WebUI Identity Services Engine (ISE 1.2/1.3), Mobility Services Engine (MSE 8.0), Improved WebUIInterface Types:Ā Ethernet RJ45, SFP

Electrical Interface:Ā Ethernet Gigabit – 1Gbps

On-Board Cache:Ā 4GB

Bays/Ports/Slots:Ā 48

U Height:Ā 1U

Wattage/VA:Ā 250W

Voltage:Ā 110-240V Multi

Color:Ā Black

SKU: WS-C3650-48TD L Category:
  • Standalone
  • Optional Stacking 48 10/100/1000 Ethernet and 2x10G SFP+ Uplink ports
  • 250WAC power supply
  • 1 RU
  • LAN Base feature set

 


 


ROHS Compliant

Weight:Ā 17Ā lb

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Cisco WS-C3650-48TD-L Catalyst 48-Port Ethernet Switch”

There are no reviews yet.