Conner CFA 540MB 4.5K SCSI II 50pin SE SCSI Hard Drive CFA540S

The drives provide the following features: – 256 KB segmentable cache buffer with adaptive cache MANAGEMENT – Tagged Command Queuing with Seek Re-ordering and Write/Read Coalescing – Down-loadable Code through SCSI Interface – SCSI-2 Compatibility – 88 bit Reed-Solomon EDAC with on the fly error correction – Microprocessor-controlled diagnostic routines execute at start-up – Automatic Spindle Synchronization – Active Termination with removable Resistor Packs – Active Negation output drivers for greater interface reliability – High performance rotary voice coil actuator with embedded servo system – No thermal recalibration required to maintain performance levels – High Shock resistance – Automatic actuator latch against the inner stop upon power down with dedicated landing zone – Sealed HDA – 1,7 run length limited code – Programmable Block Size (512 or 1024 bytes)

Capacity:1GB
Spindle Speed: 4,500RPM (Not Used Anymore)
Interface Type: SCSI 50pin
Disk Size: 3.5″x1.0″ (LFF Hard Drive)
Sustained Throughput (MBps): 5
Average Seek Time (read/write ms): 10.5
Electrical Interface Speed: SCSI II – 5MBps 8-bit

Formatted Capacity (MB=1,000,000):	540 MB
Cylinders:
SECTORS:
Heads:
Disks:
Buffer Size:
Average Seek:	10.5 ms
Single Track	3 ms
Rotation Speed/Avg. Latency	4500 rpm / 6.66 ms
Transfer Rate to/from. media	27-46 MB/sec
Transfer Rate to/from buffer	5 MB/sec
TPI (Tracks Per Inch)	3258
BPI (Bits Per Inch)	62,500
Size	1.0″ High x 4.0″ Wide x 5.75″ Depth
Weight	1.3 lbs.