04 3550600 052 7036860

DataTronix DT-ATSC-QAM-8V2 Off-Air ATSC to QAM Converter – 8 RF Input/8 QAM-B Outputs

Add to Wishlist
  • Accepts up to 8 RF inputs (ATSC-8VSB over-the-air or QAM)
  • Up to 8 Independent QAM-B Outputs that can also carry digital sub channels
  • Allows User to “Cherry Pick” Desired Programs as Needed
  • Graphic User Interface for configuration
  • Sources can be mapped to output QAM TV channels

AED14,499.00

Add to Wishlist

The DataTronix DT-ATSC-QAM-8V2 allows the operator to create a custom QAM distribution system output from ATSC clear QAM sources from a CATV feed, and outputs in QAM. The outputs can be mapped to desired TV channels.

The DT-ATSC-QAM-8V2 processes most major local broadcast networks that have a second or third local channel. These channels can contain important weather-related content, local sports, or secondary programming. Integrators who operate satellite-delivered TV systems will find this unit to be the perfect solution for adding external over-the-air or clear QAM content to their QAM distribution system.

As an added benefit, because the additional programming does not come from the satellite source, in the event of a satellite outage this unit will continue to deliver the additional programming to the property.

  • Features:

    • Accepts up to 8 RF inputs (ATSC-8VSB over-the-air or QAM)
    • Up to 8 Independent QAM-B Outputs that can also carry digital sub channels
    • Allows User to “Cherry Pick” Desired Programs as Needed
    • Graphic User Interface for configuration
    • Sources can be mapped to output QAM TV channels
    • Front Panel LED Indicators
    • Rack mountable 1RU height
SKU: DT-ATSC-QAM-8V2 Category: Tag:

  • Specifications:

    • Input
    • RF Mode (ATSC-8VSB and QAM):
      – Connector: 1x F-Type, Female
      – Input Impedance: 75Ī©
    • Modulation:
      – ATSC-8VSB
      – ITU J.83 Annex B (64-QAM, 256-QAM)
    • Tuning Block Freq Range: 55 to 861MHz (Center)
    • Bandwidth: 6 MHz
    • Numbers of Tuner: 8
    • Input Level: 6 MHz
    • Loop Through:
      – Connector: 1x F-Type, Female, Passive

      Output

    • QAM:
      – Connector: 1x “F” Female
      – Modulation: 256-QAM/64-QAM
      – Standard: J.83 Annex B
    • Frequency Range:
      – 57 to 861 MHz (Under STD Mode)
      – 8 Independent RF Frequencies
    • Channels’ Bandwidth: 6 MHz
    • Output Level: 45 dBmV Typical
    • Output Impedance: 75Ī©
    • Level Adjustment: 0dB – -20dB
    • VCN: Auto (Major & Minor)/Manual (Major & Minor)/Manual (One Part)
    • Carrier Suppression: 55dB
    • RF Output Return Loss: 10dB Typical
    • Signal-to-Noise Ratio (SNR): 42dB Typical
    • MER: 41 dB Minimum, 44dB Typical

      Web Management

    • GigE:
      – Connector: 1x RJ45
    • Standard:
      – 100/1000Base-T Ethernet
      – Full/Half Duplex, Auto-Negotiation
    • HTTP: Embedded

      Emergency Alert System (EAS)(Optional)

    • GigE:
      – Connector: 1x RJ45
    • Standard:
      – 100/1000Base-T Ethernet
      – Full/Half Duplex, Auto-Negotiation
    • UDP/RTP: Supported (user-selectable)
    • Protocol: SCTE-18 Supported

      Alarms/Monitoring

    • Local Monitoring:
      – 8x NIM Status LEDs
      – 1x Power LED
    • Local Control: IP Reset Button
    • GUI Supported: Firefox, Chrome
    • Password Protected GUI: Changeable

      Power

    • Power Supply: 12VDC 5.4Amp
    • Consumption: 23 W Typical
    • Input Voltage Range: 100 – 240 VAC

      Mechanical and Environmental

    • Chassis (WxDxH): 19.01″ x 9.45″ x 1.74″ (483mm x 240mm x 44.2mm)
    • Weight: 7.9lbs
    • Operating Temperature: 32Ā°F – 122Ā°F (0Ā°C – 50Ā°C)
    • Storage and Transportation Temperature: 32Ā°F – 140Ā°F (0Ā°C – 60Ā°C)
    • Language: English

  • Item Includes:

    • 1x DT-ATSC-QAM-8V2
    • 1x Power Cable
    • 1x Installation/Configuration Manual

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “DataTronix DT-ATSC-QAM-8V2 Off-Air ATSC to QAM Converter – 8 RF Input/8 QAM-B Outputs”

There are no reviews yet.

Related products