04 3550600 052 7036860

dbx DriveRack PA2 Loudspeaker Management Kit with RTA-M Microphone

Add to Wishlist
Key Features
  • Loudspeaker Management
  • Mac, PC, iOS, & Android Mobile Control
  • Crossover for 2- or 3-Way Systems
  • AutoEQ Automatic Room EQ Function
  • Automatic Feedback Suppression
  • dbx Compression & Limiting
  • 8-Band Parametric EQ & Graphic EQ
  • Driver-Alignment Delay
  • RTA Mic with Flat Frequency Response
  • Omnidirectional Pattern

2,899.00 د.إ

Add to Wishlist

This B&H Kit combines the dbx DriveRack PA2 with the dBX RTA-M measurement microphone to form a complete loudspeaker management system. The DriveRack PA2 is a loudspeaker processor that can be controlled via your Mac, PC, or mobile iOS or Android device. When used with the included RTA microphone, its AutoEQ function can be employed to listen to your room and automatically EQ it for optimized speaker performance. The AFS (advanced feedback suppression) feature is designed to eliminate feedback while preserving the sound of your system. In addition to automated functions, the DriveRack has integrated dbx compression and limiting as well as both a graphic and 8-band parametric EQ section. It also features driver alignment delays and a crossover section that supports full-range, 2-way, and 3-way systems. You can control the DriveRack PA2 directly from your Mac or PC via its rear-panel USB port, or connect the PA2 to a wireless router using its Ethernet port for compatibility with iOS or Android devices.

The DBX DriveRack Measurement Microphone (RTA-M) is an electret condenser microphone for use with the Real Time Analyzer function of the DBX DriveRack Control Processors. It runs on 15 volts of phantom power and produces a flat response from its omnidirectional pattern. Perfectly suited for live sound or contract installs.

dbx DriveRack PA2 Complete Loudspeaker Management System

Looking for a complete loudspeaker management system to fine tune your PA setup? Check out the dbx DriveRack PA2, a loudspeaker management system that can be controlled via your Mac, PC, or mobile iOS or Android device. Using an optional microphone connected to its RTA input, its AutoEQ function can be employed to listen to your room and automatically EQ it for optimized speaker performance. The AFS (Advanced Feedback Suppression) feature is designed to eliminate feedback while preserving the sound of your system.

In addition to automated functions, the DriveRack has integrated dbx compression and limiting as well as both a graphic and 8-band parametric EQ section. It also features driver-alignment delays and a crossover section that supports full-range, 2-way, and 3-way systems. You can control the DriveRack PA2 directly by connecting from your Mac or PC via the rear-panel USB port, or connect the PA2 to a wireless router via its Ethernet port for compatibility with iOS or Android devices.

AutoEQ
  • The AutoEQ algorithm is designed to ensure an accurate, fast, and nonintrusive automatic EQ experience.
  • With an optional mic connected to the RTA Mic input listening to your room, the DriveRack PA2 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds. This means room adjustments can now be made quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise.
AFS Feedback Elimination
  • The Advanced Feedback Suppression (AFS) algorithm allows for faster, more precise feedback elimination without adversely affecting your system’s tone.
  • The DriveRack PA2 listens for and anticipates feedback and adjusts speaker output automatically before feedback can start, while never altering your sound.
Wizard Setup Functions
  • Wizards make initial set up easy, while ensuring speaker tunings and other settings are up-to-date.
  • Wizard functions on the DriveRack PA2 to guide you through step-by-step processes to help you get the most from your loudspeaker system. It helps you configure level balancing, AutoEQ, Advanced Feedback Suppression, and provides access to built-in and constantly updating speaker tunings from most major speaker manufacturers.
Input Processing
  • dbx Compression
  • AFS (Advanced Feedback Suppression)
  • Graphic EQ
  • 8-band Parametric EQ (adjusted when using the AutoEQ)
  • Subharmonic synthesis
Output Processing
  • Crossover (supports full range, 2-way, and 3-way systems)
  • 8-band parametric EQs (used for speaker tunings)
  • dbx Limiting
  • Driver alignment delays
dbx RTA-M Reference Microphone

The RTA-M Reference Microphone from dbx is an omnidirectional mic designed for use with dbx DriveRack series real-time analyzers (sold separately) to provide an acoustic picture of a room. It can be used to capture audio and fine-tune your sound system performance to match the response characteristics of the room for live sound and recording applications. In addition, the RTA-M is built with a metal housing, requires phantom power (9 to 52 VDC), and includes a mic clip along with a hardcover case.

  • Flat frequency response
  • Omnidirectional polar pattern
  • Designed for the DriveRack series
  • Accurate “pinking” / real-time analysis of your audio
  • It runs on phantom power (supplied by the DriveRack units) and comes with a clip and case
SKU: DBPA2K (B&H Kit) Category: Tag:
Analog Inputs
Number of Inputs: 2 x Line Inputs, 1 x RTA Mic Input
Connectors: 2 x Female XLR Line Input, 1 x Female XLR RTA Mic Input
Type: Electronically Balanced / RF Filtered
Impedance: >50 Kilohms
Max Input Level (Line Inputs): > +20 dBu
CMRR: >45 dB
RTA Mic Preamp Phantom Power: +15 VDC
Analog Outputs
Number of Outputs: 6 x Line Outputs
Connectors: Male XLR
Type: Electronically Balanced, RF Filtered
Impedance: 120 Ohms
Max Output Level: +20 dBu
Alignment Delay: Up to 10 ms per Output Channel Pair
A/D and D/A Conversion
A/D Performance
A/D Converter: 24-bit with dbx Type IV Conversion System
A/D Dynamic Range: 112 dB A-Weighted, 110 dB Unweighted
Type IV Dynamic Range:
123 dB with Transient Material, A-Weighted, 22 kHz BW
121 dB with Transient Material, Unweighted, 22 kHz BW
115 dB Typical with Program Material, A-weighted, 22 kHz BW

D/A Performance
D/A Converter: 24-Bit
D/A Dynamic Range: 112 dB A-Weighted, 110 dB Unweighted
Internal Processing
32-Bit Floating Point
Sample Rate
48 kHz
Dynamic Range
A-Weighted: 110 dB Unweighted: 107 dB
THD + N
0.003% Typical at +4 dBu, 1 kHz, 0 dB Input Gain
Frequency Response
20 Hz to 20 kHz, (+0 / -0.5 dB)
Crosstalk
Interchannel Crosstalk: < -110 dB, -120 dB Typical (Input to Output: < -100 dB)
Latency
Input to Output: 1.847 ms
Power
Operating Voltage: 100 to 120 VAC 50/60 Hz
Power Consumption: 22 W
Dimensions
1.8 x 5.8 x 19″ / 4.4 x 14.6 x 48.3 cm
Weight
5.3 lb / 2.4 kg
Packaging Info
Package Weight
6.8 lb
Box Dimensions (LxWxH)
22.3 x 11.5 x 3.8″

Dbx RTA-M Reference Microphone Specs

Key Specs
Microphone Type
Handheld
Element Type
1x Electret Condenser
Polar Pattern
Omnidirectional
Frequency Range
20 Hz to 20 kHz
Analog Output
1x XLR 3-Pin Male (on Mic)
Power Sources
Phantom Power
Microphone
Primary Applications
Room/Speaker Calibration
Microphone Type
Handheld
Intended Sound Sources
Room Sound
Sound Field
Mono
Element Type
1x Electret Condenser
Polar Pattern
Omnidirectional
High-Pass Filter
No
Gain Adjustment
No
Performance
Frequency Range
20 Hz to 20 kHz
Sensitivity
-63 dB (1 kHz, Open Circuit Voltage)
Connectivity
Analog Output
1x XLR 3-Pin Male (on Mic)
Power
Power Sources
Phantom Power
Operating Voltage
9 to 52 V
Physical
Color
Black
Dimensions
ø: 0.4 x L: 5.7″ / ø: 10 x L: 145 mm
Packaging Info
Package Weight
1.535 lb
Box Dimensions (LxWxH)
12.1 x 7 x 3.5″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “dbx DriveRack PA2 Loudspeaker Management Kit with RTA-M Microphone”

There are no reviews yet.

Related products