EnGenius- ENH202..NEW!!

BASIC INFO

The following list summarizes the key features of the ENH202:

– High-output power up to 29 dBm delivers superior range and coverage

– Fully interoperable with IEEE 802.11b/IEEE 802.11g/IEEE 802.11n-compliant devices

– High-speed data rates up to 300 Mbps make the ENH202 ideally suited for handling heavy data payloads such outdoor security camera, video streaming, etc.

– WPA2/WPA/ WEP/ IEEE 802.1x support and MAC address filtering ensure secure network connections

– RSSI indicator makes it easy to select the best signal for Access Point connections

– Power-over-Ethernet capabilities allow for flexible installation locations and cost savings

– Four SSIDs let clients access different networks through a single Access Point, and assign different policies and functions for each SSID

– Multi-function operation (CB/AP/WDS/APRouter) modes provide flexible deployment

– The AP-Router mode with PPPoE/PPTP, DHCP server function support in special network deployment in which the CPE also serves as Internet gateway

– QoS (WMM) support enhances performance and user experiences

Key Differentiators

High-Power Long Range cover

Maximum 800mW Power output ensures robust signal overcoming long distances barrier

Provides superior Wi-Fi coverage over competitors

High performance six time as fast as wireless G. The Maximum wireless connection rate is up to 300 Mbps. Backward compatible to wireless b/g network.

Integrated Dual Polarity Antenna Design with 10dBi gain

Selectable vertical or horizontal antenna polarity to avoid interference and Maximize performance

Design for Outdoor Deployment

IP55 waterproof housing against rain, moisture

Cable accessory kit prevents rain and dew from getting into the device from a cable connection

Permits different levels of network access

Broadcast multiple SSID when it is in AP mode

VLAN tagging allows different access levels

SPECIFICATIONS:
Hardware Specifications
MCU: Atheros AR7240
Memory: 32 MB
Flash: 8 MB
Physical Interface: 10/100 Fast Ethernet port x 2
One Reset button
LED’s Status:
Power (Status)
LAN1/LAN2 (10/100Mbps)
WLAN (Wireless is up)
3 x Link Quality (Client Bridge mode)
Power requirements:
Active Ethernet: (Power over Ethernet) Proprietary PoE design
Power Adapter: 24VAC / 0.6A

RF SPECIFICATIONS:
Wireless standard
IEEE802.11 b/g/n
Frequency Band: 2.412 ~ 2.472GH (b/g/n)
Modulation Technologies: IEEE 802.11b: DBQSK, DQPSK, CCK
IEEE 802.11g: BQSK, QPSK, 16-QAM, 64-QAM
IEEE 802.11n: BQSK, QPSK, 16-QAM, 64-QAM
Operating Channels:
11 channels

Antenna: Internal Antenna x 2
Antenna gain: 10 dBi
Frequency Band Range: 2.4 GHz ~ 2.5 GHz
Horizontal Beam width: 70°
Vertical Beam width: 21°
Antenna Polarity: Dual-Polarized: Vertical/Horinzontal
This product does not include an external antenna connector.

SOFTWARE FEATURES:
Topology: Infrastructure
Protocol: IEEE802.3, 802.3U, 802.11 b/g/n (2.4 GHz)
Operation mode: Client Bridge/Access Point/WDS bridge/Client Router
Service: DHCP server/client
VPN: VPN Pass-through
Networking: PPPoE, PPTP
Narrow bandwidth (selectable 5MHz/10MHz/20MHz/40MHz )

MANAGEMENT:
Firmware upgrade: Reset & Backup, Ping & Trace Route
MIB: MIB I, MIB II(RFC1213), Private MIB
SNMP: SNMP v1, v2c
Security:
WEP Encryption-64/128/152 bit
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1x Authenticator
Hide SSID in beacons
MAC address filtering, up to 50 field
Wireless STA (Client) connected list
QoS: WMM (Wi-Fi Multimedia)

ENVIRONMENT & PHYSICAL:
Temperature Range
Operating: -20°C to 70°C (-4°F to 158°F)
Storage: -30°C to 80°C (-22°F to 176°F)
Humidity (non-condensing): 0%～90% typical
Dimensions: Length: 10.24” (260mm) x Width: 3.31” (84mm) x Height: 2.17” (55mm)
Weight: 0.9 Ib
Certifications: FCC, CE, IC