EnGenius -EOC-5611P

BASIC INFO

KEY DIFFERENTIATORS:

INTEGRATED DUAL POLARITY ANTENNA DESIGN
Selectable vertical or horizontal antenna polarization
Operates in horizontal polarity to avoid interference from standard vertical-polarized Wi-Fi devices
Allows service provider to utilize multi-polarization for best performance

WATERPROOF CABLE ACCESSORY KIT
Prevents rain and dew get into the device through cables and connector holes
Ensures higher waterproof quality against water and moisture

HIGH 500mW WIRELESS POWER
Ensures robust signal to overcome long distances 
Offers superior WiFi coverage than leading brands 

802.11a/b/g DUAL BAND SUPPORT
Provides supports on either 2.4GHz or 5GHz wireless frequency 
Operates in 5GHz band to avoid interference from 802.11b/g network devices
802.11a offers more wireless channels than 802.11b/g 

DUAL ANTENNA DESIGN
Embedded 14dBi DUAL POLARITY panel antenna (802.11a only) with external RP-SMA connectors (both 802.11a & 802.11b/g) for upgradeable high-gain antenna for wireless power up to 41dB EIRP in 802.11a band
Perfect for both Point-to-Point and Point-to-MultiPoint applications
Upgradeable antenna to increase range and receive sensitivity at 2.4GHz band

MULTIPLE WIRELESS NAMES (AP MODE)
Broadcasts multiple SSID’s in one device
Permits different levels of network access (VLAN Tagging)

POWER-OVER-ETHERNET (24V POE) CAPABLE
Power and data over one single cable for convenient installation
Capable of 300 feet PoE cable length
Power Injector Included

ANTENNA SPECIFICATIONS:
Internal: Directional Panel Antenna; Peak Gain 14dBi 
Frequency Band: 5.1-5.8GHz 
Horizontal -3dB Bandwidth: 35° 
Vertical -3dB Bandwidth: 15° 
Antenna Polarity: Dual-Polarized; Vertical/Horizontal 
Polarity Selection: Software Controlled 
External: RP-SMA Female Type x2 (2.4GHz)* 
*The external antenna is not included in the package. User needs to decide the antenna gain before making purchase.

HARDWARE SPECIFICATIONS:
MCU/RF: Atheros AR2313 + AR5112
Memory: 32MB SDRAM
Flash: 8MB
Physical Interface:
One 10/100 Fast Ethernet RJ-45
Reset Button
Antenna Switch (Internal & External)
RP-SMA Connector x2 (2.4GHz & 5GHz)
LED Indicators:
Power (Status)
LAN (10/100Mbps)
WLAN (Wireless Activity)
Link Quality x3 (Client Bridge mode)
Green: Excellent Quality / Yellow: Good Quality / Red: Poor Quality
Power Requirements:
Active Ethernet: (Power-over-Ethernet) Proprietary PoE Design
Power Adapter: 24V/1A DC
Regulation Certifications: FCC Part 15C/15B/15E, EN301 893, EN 300 328, EN 301 489-1/-17, EN60950, IC
* RSSI indication is only in client bridge mode.

RF SPECIFICATIONS:
Frequency Band:
802.11a: 5.150~5.350GHz, 5.470~5.725GHz, 5.725~5.825GHz
802.11b/g: 2.412~2.472GHz
Modulation Technology: OFDM : BPSK, QPSK, 16-QAM, 64-QAM, DSSS: DBPSK, DQPSK, CCK
Operation Channels:
802.11a: 21 for North America
802.11b/g: 11 for North America, 14 for Japan, 13 for Europe
Receive Sensitivity (Typical):
IEEE 802.11a
-92dBm @ 6Mbps
-73dBm @ 54Mbps
IEEE 802.11g
-92dBm @ 6Mbps
-75dBm @ 54Mbp
IEEE 802.11b
-97dBm @ 1Mbps
-91dBm @ 11Mbps
Available Transmit Power (Average):
IEEE 802.11a
26dBm @ 6~24Mbps
24dBm @ 36Mbps
22dBm @ 48Mbps
20dBm @ 54Mbps
IEEE 802.11g
26dBm @ 6~24Mbps
24dBm @ 36Mbps
23dBm @ 48Mbps
22dBm @ 54Mbps
IEEE 802.11b
27dBm @ 1~11Mbps
Antenna:
Internal: Directional Panel Antenna; Peak Gain 14dBi
Frequency Band: 5.1-5.8GHz
Horizontal -3dB Bandwidth: 35°
Vertical -3dB Bandwidth: 15°
Antenna Polarity: Dual-Polarized; Vertical/Horizontal
Polarity Selection: Software Controlled
External: RP-SMA Female Type x2 (2.4GHz & 5GHz)

SOFTWARE FEATURES:
Topology: Infrastructure
Protocol / Standard: 802.3 (Ethernet) / 802.3u (Fast Ethernet) / 802.11a (5GHz WLAN) / 802.11b/g (2.4GHz WLAN)
Operation Mode: Access Point / Client Bridge / Client Router / WDS
LAN: DHCP Server / DHCP Client
VPN: VPN pass-through
Wireless:
Channel Selection (Setting varies by countries)
Transmission Rate: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 in Mbps
Long Distance Transmission: 1km to 30km (ACK Timeout)
Auto Channel Selection
Traffic Shaping
Transmit Power Table
AP Detection
Narrow Bandwidth 5/10/20MHz Support
Signal Strength LED Indicators (3 colors)   
PPPoE & PPtP (Client Router mode)
Preferred SSID
Mutiple SSID Support (up to 4)(Access Point mode)
802.1q VLAN Tagging Support
Security:
WEP Encryption 64/128/152bits
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1x Authenticator
Layer 2 Isolation
Hide SSID in Beacons
MAC Address Filtering (up to 50)
Wireless STA (Client) Connected List
QoS: WMM

MANAGEMENT:
Configuration: Web-Based Configuration (HTTP)
Firmware Upgrade: Upgrade Firmware via Web Browser / Keep Latest Setting When Firmware Update
Administrator Setting: Administrator Password Change
Reset Setting: Reboot (Press 1 second) / Reset to Factory Default (Press 5 seconds)
System Monitoring: Status, Event Log
SNMP: v1, v2c
MIB: MIB I, MIB II (RFC1213)
Backup & Restore: Settings Through Web
Time Setting: NTP (Auto Setting) / Manual Change

ENVIRONMENT & PHYSICAL:
Temperature Range: Operation -20°C to 70°C (-4°F to 158°F) / Storage -30°C to 80°C (-22°F to 176°F)
Humidity (Non-condensing): 0% ~ 95% Typical
Dimensions: L: 10.24” (260mm) x W: 3.31” (84mm) x H: 2.17” (55mm)
Weight: 0.66lb. (300g)


Package Content:
→ 1 x Dual Radio Multi-Function AP (EOR7550)
→ 1 x PoE injector with Power Adapter
→ 1 x Wall Mounting kit
→ 1 x 1.8m Grounding Cable
→ 1 x CD with User’s Manual
→ 1 x QIG

Note: The 2.4 GHz operation is an optional feature, there is no internal 2.4GHz antenna is included with the EOC5611P. User will need an external 2.4GHz antenna for this product to operate correctly