ESR6650 is a 3G-enabled Wireless-N Router that delivers up to 3X faster speed (150Mbps). It supports 3G data cards from HuaWei, OPTION, Sierra and BandLuxe with standards covering WCDMA (HSDPA), CDMA2000 & TD-SCDMA. It is built-in with USB for easy and flexible plug-and-play interface for 3G cards.
Ā
ESR6650 supports home network with superior throughput and performance and unparalleled wireless range. With easy to use on the WPS function, it helps users to connect to wireless device with just one push button.
Ā
There’s also a built-in 2-port full-duplex 10/100 Fast Switch to connect your wired-Ethernet devices together. The Router function ties it all together and lets your whole network shares a high-speed cable or DSL Internet connection.
Software Features |
Router And Gateway |
|
Topology |
Infrastructure |
Operation Mode |
AP / Router / WDS |
LAN |
–Ā DHCP Server –Ā Static Routing Table |
WAN |
–Ā Ā PPTP –Ā PPPoE –Ā Static IP –Ā DHCP Client –Ā Clone MAC |
Router |
–Ā NAT/ NAPT –Ā Static Routing –Ā Dynamic Route –Ā Virtual server mapping –Ā IP address mapping –Ā Port Forwarding –Ā Port Triggering –Ā Special application –Ā ALG(Application Layer Gateway) support (RTP/RTSP, AOL, FTP, ICMP, WMP/MMS, NetMeeting, SIP) –Ā DNS Relay –Ā DDNS –Ā Time Zone(NTP client) |
Firewall |
–Ā Blocking Ping –Ā DoS(Blocking Ping, Port scan, Sync Flood) –Ā Ā MAC / IP Filtering –Ā ICMP Blocking –Ā SPI (Stateful Packet Inspection) –Ā DMZ (Demilitarized Zone) Host –Ā Policy Based Parental Controls –Ā Ā Port Range / Service Filtering –Ā Ā Internet Domain Restriction –Ā Ā Dynamic URL Filtering (OEM subscription service) |
VPN |
VPN pass-through (PPTP, L2TP, IPSEC) |
Wireless |
–Ā Power saving(Green technology) –Ā Multiple SSID –Ā 64/128 bit WEP Encryption –Ā WPA Personal (WPA-PSK using TKIP or AES) –Ā WPA Enterprise (WPA-EAP using TKIP) –Ā 802.1x Authenticator –Ā Hide SSID in beacons –Ā Wi-Fi Protection Setup (WPS) –Ā WDS –Ā ACL control –Ā Best channel selection –Ā Speed/Bandwidth monitor |
QoS |
–Ā WMM –Ā Application base –Ā Ā Priority Queue –Ā Ā Bandwidth Allocation |
Ā |
Ā |
Management |
|
Configuration |
Web-based configuration (HTTP) |
Firmware Upgrade |
–Ā Via webpage upgrade –Ā Auto recovery once firmware upgrade fail |
Administrator Setting |
Administrator password change |
Reset Setting |
–Ā Reboot –Ā Reset to Factory Default |
System monitoring |
Speed and Bandwidth monitoring |
Scheduling |
–Ā Enable Firewall –Ā Enable power saving |
Easy access |
User can type model name and access the main page. |
Install wizard |
Guide user to set-up Router smoothly |
Technical Specifications |
Hardware Specifications |
|
Memory |
32MB SDRAM |
Flash |
4MB |
Physical Interface |
WAN: 1 * 10/100 Fast Ethernet RJ-45 |
LAN: 2 * 10/100 Fast Ethernet RJ-45 |
|
Rest button |
|
Power Jack |
|
WPS (WiFi Protected Setup) |
|
USB (for 3G data card) |
|
LEDs Status |
Power Status |
WAN (Internet connection) |
|
10/100Mbps LAN1 & LAN2 |
|
WLAN(Wireless connection) |
|
3G networks |
|
Power Requirements |
Power Supply: 200 to 240 VDC ± 10ļ¼ (ETSI) 100 to 120 VDC ± 10ļ¼ (FCC) |
Device: 12V/1.25A |
|
Note: 1. WAN can either be USB port or WAN port. USB is the default WAN. 2. RAM and Flash design should be flexible to cover SOHO and ISP purpose.
|
There are no reviews yet.