EnGenius11b/g/n 300Mbps Extender with 2Tx2R Upgradeable Antenna

Availability:

10 in stock


د.إ179.00

10 in stock

The Wireless N Range Extender is the easiest way to extend wireless coverage in your home or small office without running cables. Just put it in between your main access point or wireless router and the dead spot in your area that you want to cover with the wireless signal. It is designed to ā€œrepeatā€ signals into the far, hard-to-reach areas of your home or office. Eliminating the need to run cables allows you to build a wireless network in a most cost effective way.Ā 

Wide Compatibility
The Wireless-N Range Expander works with most Wireless access points and wireless routers, and is compatible with Wireless-B, Wireless-G and Wireless-N devices so you’ll get the benefits of increased coverage even with a mixed network.

Easy Configuration
Installation is a snap with Push button Setup. Just plug it in and press the button. The Expander is designed to find your wireless network and configure itself automatically. There is also an easy to use installation wizard for more complicated setups.

**The updated firmware rev 2.0.2 is also available in the tab of Resources for easier installation for ERB9250.**

BASIC INFO

User Type Consumer
Technology 10/100 ā€¢ Wireless N
Model Number ERB9250

Wireless 802.11n Technology
ā€¢ The most advanced wireless networking technology for the best range and speedĀ 
Range Expander
ā€¢ Extends the range of Wi-Fi networks to areas that the signal cannot reachĀ 
Client Bridge Mode
ā€¢ One 10/100 port allows connection of an Ethernet equipped device to a wireless networkĀ 
Configurable through push-button setup, your networked PCā€™s Web browser, or the included Setup Wizard
Works with Wireless-B, Wireless-G and Wireless-N
Secure Push-Button Setup
ā€¢ Wi-Fi Protected Access (WPA2/WPA) and WEP-64/128
Removeable and Upgradeable Antennas

Specifications:

RF Specification

Frequency BandĀ 2.400ā€“2.484 GHz

Modulation TechnologyĀ OFDM: BPSK, QPSK, 16-QAM, 64-QAM

DBPSK, DQPSK, CCK

Operation ChannelsĀ 11 for North America, 14 for Japan, 13 for Europe

Wireless Settings

Wireless ModeĀ 11b/ 11g /11n

Channel SelectionĀ (Setting varies by Country)

Channel BandwidthĀ (Auto, 20Mhz, 40Mhz)

Receive SensitivityĀ (Typical)

IEEE802.11n(2RX)

MCS0/8 @ -91dBm ā€¢ MCS7/15@ -74dBm

IEEE802.11g (2RX)

6Mbps@ -92dBm ā€¢ 54Mbps@ -75dBm

IEEE802.11b (1RX)

1Mbps@ -93dBm ā€¢ 11Mbps@ -91dBm

Available Transmit Power

IEEE802.11n

MCS 0~15@ typical 16 dBm

IEEE802.11g

6~54 Mbps@ typical 16 dBm

IEEE802.11b

1, 11Mbps@ typical 19 dBm

Antenna *2 Peak Gain = 2 dBi

Software Features

UtilityĀ Easy Setup Wizard

RouterĀ User Interface

Access MethodĀ Web Based (HTTP 1.0/1.1)

Browser CompatibilityĀ Microsoft Internet Explorer 5.5/6/7 ā€¢ Safari ver1.2 ā€¢Ā Firefox 2.0 or later

Operation ModeĀ CB (2.5 NAT) Client Bridge

Repeater

Output Power ControlĀ 10% / 25% / 50% / 75% / 100%

WiFiĀ WMM

SecurityĀ WEP (64/128 bit)

WPA-PSK Personal, WPA2-PSK

Personal, WPA/WPA2-PSK (Personal), WPA-EAP Enterprise,

WPA2-Enterprise, WPS/WPA2-EAP (Enterprise)/TKIP/AES

Environment & Physical

TemperatureĀ Range
Operating: 0Ā°C to 45Ā°C (32Ā°F to 113Ā°F)

Storage: -10Ā°C to 70Ā°C (14Ā°F to 158Ā°F)

Humidity (non-condensing) 15% ā€“ 95% typical

SKU: ERB9250 Category: Tags: , ,

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “EnGenius11b/g/n 300Mbps Extender with 2Tx2R Upgradeable Antenna”

There are no reviews yet.