HPE 818367-B21 4TB SAS Hard Disk Drive Kit 651314-001 Gen8 / Gen9

HPE 818367-B21 / 818367-S21 / 819079-001 / 818368-B21 / 820409-002 / 820194-002 / 818364-002 / 846523-004 / MB4000JFEPB / MB4000JFEMN / MB4000JFDSN / MB4000JVYZQ 4TB 3.5-Inch LFF 12Gbps 7.2K RPM HS 512n Midline SC SAS Hard Drive Kit 651314-001 – Brand New

HPE 818367-B21 / 818367-S21 / 819079-001 / 818368-B21 / 820409-002 / 820194-002 / 818364-002 / 846523-004 / MB4000JFEPB / MB4000JFEMN / MB4000JFDSN / MB4000JVYZQ 4TB / 4000GB 3.5” LFF / Large Form Factor 12.0 Gb/s 7200 RPM HS / Hot-Swap 512n / 512 Native Midline SC / SmartDrive Carrier SAS / Serial Attached SCSI HDD / Hard Drive Kit 651314-001 for Gen 8 and Gen 9 Systems – Brand New

NOTE: This drive is supported by Generation 8 / Gen 8 / Gen8 / G8 and Generation 9 / Gen 9 / Gen9 / G9 servers

Alt Model Numbers: 818364-002 / 818367-S21 / 818368-B21 / 819079-001 / 820409-002 / 820194-002 / 846523-004 / MB4000JFEPB / MB4000JFDSN / MB4000JFEMN / MB4000JVYZQ

HPE Hard Disk Drives
HPE Hard Disk Drives (HDDs) delivers proven performance at industry leading capacities backed by high quality and reliability, preferred choice for many workloads ranging from small businesses to large enterprise.

HPE hard disk drives are optimized to deliver maximum performance on HPE server platforms, and are proven for applications that demand reliable performance in 24×7 operational environments. HPE HDDs offer customers great value per gigabyte without sacrificing performance. In addition, an industry-leading testing and qualification program ensures that our drives are rugged enough for any need.

HPE HDDs are available for three types of workloads —Entry, Midline and Enterprise, two interfaces—SAS and SATA, and in a variety of capacities—up to 10 TB and growing.

What’s New

• HPE 10TB 12G SAS 7.2K rpm LFF (3.5in) 512e SC Midline 1yr Warranty Hard Drive
• HPE 10TB 12G SAS 7.2K rpm LFF (3.5in) 512e Midline 1yr Warranty Hard Drive
• HPE 8TB 12G SAS 7.2K rpm LFF (3.5in) 512e SC Midline 1yr Warranty Hard Drive
• HPE 6TB 12G SAS 7.2K rpm LFF (3.5in) SC Midline 1yr Warranty Hard Drive

Application
SAS Midline drives are intended for servers and storage solutions where high capacities are required. These drives have moderately-priced reliability and performance for non-mission critical, low workload applications, such as disk backup, archival, and reference applications.

Transfer rate
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.

NOTE: To support HPE hard drives exceeding 2.2 TB, HPE Smart Array Firmware version 5.0 or later is required for the following controllers:

• HPE Smart Array P212 Controller
• HPE Smart Array P410 Controller
• HPE Smart Array P411 Controller
• HPE Smart Array P711m Controller
• HPE Smart Array P812 Controller

To use hard drives exceeding 2.2 TB, you must create a boot volume using offline ACU version 8.75 or later. HPE Smart Array controllers do not support boot volumes exceeding 2.2 TB.

This Drive is Compatible with HP Proliant Gen8 , Gen9 Server that accept 3.5″ SAS drives. Including but not limited to:
DL160 Gen8,DL320e Gen8, DL360e Gen8, DL360p Gen8, DL380e Gen8, DL380p Gen8, DL385p Gen8, ML310e Gen8, ML350e Gen8, ML350p Gen8, SL4540 Gen8, SL4545 Gen8, ML30 Gen9