ET1Z04EACC00 is the S12704 Enhanced Engine AC Bundle(Including Assembly Chassis*1,MPUA Main Board*1,SFUC Switch Fabric Unit*2,800W AC Power*2,Basic Software*1)
Quick Specs
Table 1 shows the Quick Specs.
Product Code | ET1Z04EACC00 |
Packet Forwarding Rates | 3,120 Mpps; 4,560 Mpps |
Switching Capacity | 4.88 Tbit/s; 16.08 Tbit/s |
MPU Slots | 2 |
SFU Slots | 2 |
Service Card Slots | 4 |
Energy Saving | Energy Efficient Ethernet (802.3az) |
Redundancy Design | MPUs, SFUs, power supplies, and fan modules |
Maximum Power Consumption of the Entire Equipment | ⤠2,200W |
Installation | The switch can be installed in an N66E or N68E cabinet, one cabinet for one chassis. |
Dimensions (W x D x H) | With cable management frames: 442 mm x 585 mm x 441.7 mm (17.4 in. x 23.0 in. x 17.39 in. (10 U))
Without cable management frames: 442 mm x 489 mm x 441.7 mm (17.4 in. x 19.3 in. x 17.39 in. (10 U)) |
Weight | 60 kg (132.3 lb) |
Note:
ā | Two MPUs |
ā” | Four service cards, including:
Ā·Open Service Platform Unit |
⢠| Two SFUs |
⣠| A pair of mounting brackets |
⤠| Four power modules |
ā„ | Two CMUs |
⦠| Front ESD jack |
ā§ | Cable management frames |
Ā·The mounting brackets are used to secure the chassis in a cabinet.
Ā·The ground terminal of an ESD wrist strap can be inserted in the Front ESD jack. The ESD wrist strap can provide ESD protection when the chassis is reliably grounded.
Note:
ā | Two Fan Module |
ā” | Rear ESD jack |
⢠| JG ground terminal |
⣠| Air filter |
⤠| A pair of removable handles |
Ā·The ground terminal of an ESD wrist strap can be inserted in the Rear ESD jack. The ESD wrist strap can provide ESD protection when the chassis is reliably grounded.
Ā·The air filter prevents dust from entering the chassis.
Ā·You can install these removable handles on two sides of the chassis to lift the chassis.
There are no reviews yet.