04 3550600 052 7036860

Intel AXXRSBBU7 RAID Smart Battery

Add to Wishlist

1,099.00 د.إ

Add to Wishlist

Intel AXXRSBBU7 RAID Smart Battery Backup Unit BBU – Brand New

Intel AXXRSBBU7 RAID Smart BBU Battery Backup Unit – Brand New

The IntelĀ® RAID Smart Battery AXXRSBBU7 (BBU) is an optional accessory for selected RAID controllers. The BBU preserves the contents of the RAID DIMM if the power drops below specifications. It ensures that following a power failure or other fatal event, all data on the RAID cache DIMM is flushed to the hard disk drives.

The IntelĀ® RAID Smart Battery AXXRSBBU7 contains the following components:

  • Board-to-board connector: The IntelĀ® RAID Smart Battery AXXRSBBU7 can connect to the base RAID controller through this connector, as a daughter card to the base RAID controller. Āƒ
  • 20-pin remote battery connector: The IntelĀ® RAID Smart Battery AXXRSBBU7 can remotely connect to the Remote Extender Board (REB) component through this connector. Āƒ
  • Remote Extender Board (REB): The REB component is used to connect to the base controller through the board-to-board connector, as a daughter card to the base controller, so as to provide a 20-pin inline connector for remote battery installation support. Āƒ
  • Remote battery connecting cable: A 20-inch 20-pin connector cable is provided to connect the REB card to the battery. Āƒ
  • The Smart Battery Module which includes the following components:
    • Smart Battery circuit board: This ensures that the battery is maintained at optimal performance and charge levels. This circuit is based on the Texas Instruments bq2060A SBS v1.1-compliant gas gauge IC. Āƒ
    • Battery pack: The battery pack is mounted on the circuit board. It includes a separate internal circuit logic board and Li-Ion (Lithium Ion) batteries. The logic board provides sensing and management logic to support battery charge, discharge, and monitoring. Āƒ
    • 5-pin battery pack connecting cable: The connector is used for communicating between the Smart Refresh circuit board and the battery pack.

    Āƒ

  • Monitoring / notification software: Monitoring is accomplished through the IntelĀ® RAID BIOS Console 2, IntelĀ® RAID Web Console 2, or IntelĀ® RAID Command Line Utility 2 utilities. The software notifies the user of failures or corrective actions.
SKU: AXXRSBBU7 Category: Tag:
Weight 0.266 kg
SPECIFICATIONS
Model Number AXXRSBBU7
Date retention Up to 72 hours
Chemestry Lithium-Ion (Li-Ion)
Dimensions 3.160 inches x 2.122 inches (battery extends over PCB)
Weight 51 grams
Operating temperature 10 to 44.5Ā° C dry bulb temperature (the maximum dry bulb temperature is derated by 3.3Ā° C per 1000 m above 500 m)
Operating humidity 20% – 80% non-condensing
Storage temperature Depends on the storage time:

  • Greater than 90 days at 0 to 30Ā° C
  • 30 to 90 days at 0 to 40Ā° C
  • Less than 30 days at 0 to 50Ā°C
Storage humidity 20% to 80% non-condensing
Battery capacity 1350 mAH
Voltages Nominal OCV: 3.7 V
Fast charge rate 500 mAH
Battery voltage conditioning Less than 3.0 V
Battery charge time Typical: Approximate 4 hours
Date retention times 72 hours for 512 MB, using five 64M x 16 parts DDR
MTBF (electrical components)
  • 3,257,965 hours at 40Ā°C
Battery shelf life one year
Battery operational life 500 recharges cycles
NOTE INTEL RECOMMENDS REPLACING THE BATTERY YEARLY

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Intel AXXRSBBU7 RAID Smart Battery”

There are no reviews yet.

Related products