Juniper M40e M40eBASE-DC Router – 90 Day Warranty

This router is in excellent condition and comes to you used out of a working environment. Bid with confidence as this equipment is sold with a 90 day hardware guarantee. I will strap this unit to a pallet and ship as freight. You are bidding on the following:

1 x Juniper M40eBASE-DC Router

• 2 x SFM-CF-E-16 – Switching Forwarding Module Internet Processor II

• 2 x RE600-2048 – Routing Engine with 600 MHz Pentium III, 2048 MB DRAM, 256 MB flash drive, 30 GB hard disk drive

• 1 x MCS – Miscellaneous Control Subsystem Module

• Juniper M40e-FPC1-EP – Enhanced Plus Flexible PIC Concentrator (for Type 1 PICs; requires 7.2R1 or later sw)

• 1x Juniper PB-12FE-TX-MDI-B 12 Port Fast Ethernet PIC – MDI Breakout Cable Included

• 1x Juniper PB-1GE-SFP-QPP 1-Port Gigabit Ethernet PIC for M320, T320, or M40e router.

• 2x DC power

For more information please

The M40e Multiservice Edge Router is a complete routing system that provides SONET/SDH, ATM, Ethernet, and channelized interfaces for large networks and network applications, such as those supported by Internet service providers (ISPs). Application-specific integrated circuits (ASICs), a definitive part of the router design, enable the router to forward data at the high speeds demanded by current network media.

The router accommodates up to eight Flexible PIC Concentrators (FPCs), which can each be configured with a variety of network media types, altogether providing up to 32 OC12/STM4, 32 Gigabit Ethernet, or eight OC48/STM16 ports per system. The router height of 35 in. (89 cm) enables stacked installation of two M40e systems in a single floor-to-ceiling rack, for increased port density per unit of floor space.

The router’s maximum aggregate throughput is 3.2 gigabits per second (Gbps) full duplex per FPC. Inserting a combination of PICs with an aggregate higher than the maximum throughput is supported, but constitutes oversubscription of the FPC.

The router architecture cleanly separates control operations from packet forwarding operations, which helps to eliminate processing and traffic bottlenecks. Control operations in the router are performed by the Routing Engine, which runs JUNOS Software to handle routing protocols, traffic engineering, policy, policing, monitoring, and configuration management. Forwarding operations in the router are performed by the Packet Forwarding Engine, which consists of hardware, including ASICs, designed by Juniper Networks.