Juniper Single-Port E3 Physical Interface Module JX-1E3-S


Interface Types:Ā Ethernet RJ45

Encryption/SED Supported

Bays/Ports/Slots:Ā 1

AED24,999.00

Juniper Single-Port E3 Physical Interface Module JX-1E3-S – Brand New

The Juniper E3 PIMs provide the physical connection to E3 network media types, receiving incoming packets from the network and transmitting outgoing packets to the network. The Juniper E3 PIMs are equipped with a dedicated network processor that forwards incoming data packets to the Routing Engine, and receives outgoing data packets from the Routing Engine. During this process, the PIM performs framing and line-speed signaling. When installed in the ScreenOS-based Secure Services Gateway 500 Series firewall/VPN appliance, the dedicated network processor will forward traffic to the SSG 500 Series CPU where traffic decisions are made based upon the security policy.

The JX-1E3-S PIM is compatible with:

J4350, J6300 and J6350 Services Routers
Secure Services Gateway 500 Series firewall appliance.

The Juniper DS3 and E3 PIMs provides the following benefits:

  • High speed DS3 or E3 interfaces can support WAN access needs of large regional or corporate sites.
  • The integrated DSU eliminates the need to deploy a separate external device saving valuable space and simplifying management.

Features

  • Fully integrated DSU
  • Onboard Network Processor
  • Subrate & Scrambling options with support for major DSU vendors
  • Independent Clock
  • Loopback, Bert, and FEAC diagnostics

Compatibility:

The JX-1E3-S PIM is compatible with:

J4350, J6300 and J6350 Services Routers
Secure Services Gateway 500 Series firewall appliance.

SKU: JX-1E3-S Category:
Specification JX-1E3-S
JUNOS Software Release The E3 PIM is supported in JUNOS 7.3 or greater on the J-series Services Routers
ScreenOS Software Release The E3 PIM is supported in ScreenOS 6.0 on the SSG 500 Series
Dimensions (H x W x D) 0.63 in. x 5.45 in. x 6.5 in.
1.6 cm. x 13.8 cm. x 16.5 cm.
Network Interface Specifications  
Ā Ā Ā HDLC Features Shared flag
Idle flag/fill (0x7e or all-ones)
Counters: runts, giants, fcs error, abort error, align error
MTU: Normal (4500 bytes) or Jumbo (max 9192 bytes)
Ā Ā Ā Interface connector DSX3 interface with dual female 75-ohm BNC coaxial connectors (separate RX/TX)
Ā Ā Ā System timing Internal, Loop
Environmental  
Ā Ā Ā Operating Temperature 0 to 40C
Ā Ā Ā Non-Operating Temperature -40 to 70

 


 


Weight:Ā 14Ā lb

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Juniper Single-Port E3 Physical Interface Module JX-1E3-S”

There are no reviews yet.