04 3550600 052 7036860

Kramer VP-770 8-Input Presentation Switcher/Switcher with Speaker Output

Add to Wishlist
  • Component, two Composite, two VGA Inputs
  • DisplayPort and two HDMI Inputs
  • Simultaneous HDMI, VGA, DGKat, HDMI Out
  • Digital & Analogue Audio Inputs/Outputs
  • Supports HDPC with EDID Management
  • Luma Keying and Picture Zooming
  • Customizable Dual Image Layouts
  • Built-in ProcAmp & Time Base Corrector
  • 3D Comb and Noise Reduction Filters
  • De-Interlacing with Pull-Down Handling

AED11,699.00

Add to Wishlist

The Kramer VP-770 is a 1RU form-factor, 8-input presentation switcher and scaler that is designed to allow you to integrate a variety of different audio and video sources into your A/V system. It features two HDMI, two VGA, a DisplayPort, a component, and two composite video inputs along with discreet audio inputs for each video source as well as a mic input. It will scale as well as convert the frame rates of the incoming video sources to conform to a common standard for output to up to four displays. It features two HDMI outputs, a VGA output, and a DGKat Ethernet connector allowing you to send an HDMI signal over an Ethernet cable to a compatible Kramer receiver balun for applications where were long cable runs are required. In addition, it features digital S/PDIF and analogue audio out as well as an amplified, 10W stereo speaker connector.

With HDPC compliance and EDID management, the VP-770 will accept video in most HDTV and resolutions and frame rates as well as NTSC and PAL standard definition analogue video. Devices that can be connected to the a switcher/scaler include computers, DVD and Blu-ray players, document cameras, media players, camcorders, video production switchers, or even legacy analogue devices such as VCRs. The HDMI and VGA outputs can be used to drive display devices including multimedia projectors, TVs, commercial displays, and computer monitors.

EDID Management
The EDID (Extended Device ID) data for a selected master input can mapped to one of the outputs to help ensure proper “handshake”
HDCP Compliant
HDMI sources with HDCP (High Definition Content Protection) encryption will only pass to the HDMI output on the VP-770
Fade-Thru-Black (FTB) Switching
When switching, the image fades to black giving the new source a chance to establish sync, the new image then fades in for a seamless transition
Multiple Simultaneous Video Outputs
Both VGA ports, the HDMI port, and the DGKat HDMI balun port are active simultaneously, allowing you to connect up to four display devices without using a distribution amplifier or splitter
Dual Window Display
Presets for picture-in-picture (PIP), picture-and-picture, and split screen presentation modes, as well as customized window layouts. Both the main and PIP window can be magnified up to 1600%
Luma Keying via PIP Window
Allows you key out a portion of the main image based on luminance value allowing you to insert backgrounds and overlays
ProcAmp and Image Filters
  • ProcAmp allows you to individually adjust color, sharpness, contrast, brightness, and gamma for each input
  • Time-base corrector (TBC) helps stabilize jittery, unstable video sources
  • Noise reduction with temporal, block, mosquito, and comb filtering
  • 3D comb filter provides improved color separation for composite video inputs
IR, Ethernet, and RS-232 Controls
You can control the VP-770 directly using the on-screen display (OSD) accessed via buttons on the front panel, from a computer using the RS-232 serial interface, or over a network using IP protocol
Audio Delay
Manually adjustable audio delay allows you to bring audio and video into sync
Multiple Aspect Ratio Selections
Select from follow input, follow output, best fit, letterbox, and overscan
De-interlacing
Supports 3:2 and 2:2 pull-down and features 24sf handling
Other Notable Features
1RU, rackmountable design
Non-volatile memory retains user setting even after disconnecting power
Vertical keystoning
Selectable power saving modes
Firmware updates via RS-232
SKU: VP-770 Category: Tag:
Input Connectors
2x HDMI
1x DisplayPort (version 1.1a)
2x VGA on 15-pin D-sub connector
1x Component video on 3 RCA connectors
2x Composite video on RCA connector
5x Unbalanced stereo audio on 3.5 mm mini jack connector – one per each HDMI, VGA, and DisplayPort input
2x Unbalanced stereo audio on two RCA connectors – one per each composite input
1x S/PDIF digital audio on RCA connector – for component video input
1x Unbalanced mic input on 3.5 mm mini jack connector
Output Connectors
1x HDMI
1x VGA on 15-pin D-sub connector
1x DGKat on RJ-45 connector
1x S/PDIF digital audio on RCA connector
1x Unbalanced stereo audio on 3-pin terminal block
1x 10 W amplified stereo audio on speaker jack connectors
Output Resolutions
Computer
640 x 480: 60, 75 Hz
800 x 600: 50, 75 Hz
1024 x 768: 50, 60, 75 Hz
1280 x 768: 50, 60 Hz
1280 x 800: 60 Hz
1280 x 1024: 50, 60, 75 Hz
1360 x 768: 60 Hz
1366 x 768: 50, 60 Hz
1400 x 1050: 50, 60 Hz
1600 x 900: 60, 50 Hz
1600×1200: 60 Hz
1680 x 1050: 60 Hz
1920 x 1200: 60 HzVideo
480i: 60
480p: 60
576i: 50
576p: 50
720p: 50, 59.94, 60
1080p: 23.976, 24, 25, 29.97, 30, 50, 59.94, 60
2K (2048 x 1080): 60, 50 Hz
Controls
On-screen display (OSD) – via front panel buttons
IR remote control
1x RS-232 port on 9-pin D-sub connector
1x Ethernet port on RJ-45 connector
Power Requirements
100 – 240 VAC / 56 VA max.
Rack Height
1 RU
Dimensions
19 x 9.3 x 1.8″ / 482 x 236 x 44 mm
Weight
5.5 lb / 2.5 kg
Packaging Info
Package Weight
7.55 lb
Box Dimensions (LxWxH)
21.6 x 13.3 x 4.4″

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Kramer VP-770 8-Input Presentation Switcher/Switcher with Speaker Output”

There are no reviews yet.

Related products