The DigitaLinx DL-HD2100 is an 18G HDMI 2.0 extender-over-category cable that transports 18Gbps data rates up to 328 feet. The system uses 2:1 data compression when the signal surpasses 10Gbps, anything under 10Gbps will never be compressed. In addition to extending high bandwidth HDMI signals, the extension system will extend IR, RS232, digital audio, Ethernet, and is ARC compatible. System supports flexible power so entire extender circuit can be powered by either the TX or RX side.
Receiver Kit, Transmitter
Liberty AV DL-HD2100
- Supported Audio and Video
- Video Compliance: HDMI 2.0b, HDCP 2.2, ARC (Audio Return Channel) and CEC (Consumer Electronics Control)
- Input / Output Resolution Support: Up to 4096×2160 @24/25/30/60Hz
- Maximum Pixel Clock: 594MHz
د.إ4,599.00
- Embedded Audio: Up to PCM 8 channel, Dolby Atmos, DTS: X, Dolby TrueHD, DTS-HD Master Audio, Dolby Digital and DTS
- IR Carrier Frequency Range: 33-55kHz at 5 volts
- RS232 Baud Rate: Up to 115200 baud
- HDBaseT Signal Characteristics
- Maximum Distance: 330 feet
- Cable Requirements: Solid core F/UTP Category 6 cable or greater with TIA/EIA-568B crimp pattern
- Bandwidth: 18 Gbps
- Chassis and Environmental
- Dimensions TX: 7.7 in. x 3.7 in. x 0.8 in.
- Dimension RX: 7.7 in. x 3.7 in. x 0.8 in.
- Operating Temperature (Environment): TX/RX +32 to +113 F
- Operating Temperature (Chassis): TX: 88 F / RX: 100 F
- Operating Humidity (Environment): 10% to 90%, Non-condensing
- Product Weight: 2.2 lbs
- Power
- Maximum Power Consumption: 27 watts (TX)- when receiver is powered by transmitter / 27 watts (RX) – when transmitter is powered by receiver
- Power Supply Input Voltage: 100-240V AC at 50-60 Hz
- Power Supply Output Voltage: DC 12V 3A
- ESD Protection: 8kV (air-gap discharge) / 4kV (contact discharge)
- Surge Protection Voltage: 1 kV
- Regulatory: CE, FCC
- Other
- Included Items: (1) Transmitter / (1) Receiver / (1) Quick Install Guide / DC 12V Power Supply with US, UK, EU, and AU adapters / (2) IR Transmitters / (2) IR Receivers / (1) IR-AC IR coupler cable / (4) Mounting Brackets and Mounting Screws
There are no reviews yet.