Maxtor MaXLine II 5A300J0 300GB IDE Hard Drive

Capacity: 300GB
Spindle Speed: 5,400RPM
Interface Type: IDE / ATA (3.5″)
Disk Size: 3.5″x1.0″ (LFF Hard Drive)
Sustained Throughput (MBps): 24/42
Average Seek Time (read/write ms): 5.55
Electrical Interface Speed: EIDE / Ultra ATA/133 – 133MBps
On-Board Cache:

Product Overview 
MaXLine II hard disk drive is part of a family of highly durable, 1-inchhigh hard disk drives MANUFACTUREDto meet the highest product quality standards. These hard drives use non-removable, 3 1/2-inch hard disks and are available with ATA interfaces. Maxtor has combined leading edge technologies with the largest ATA drive storage capacity available today to create the highly durable MaXLine II hard disk drive. Innovative features and design make it ideally suited for applications requiring large storage capacity.

Key Features

• ANSI ATA-5/6 compliant PIO Mode 4 interface (Enhanced IDE)
• Supports ATA-6 UltraDMA Mode 5 (100 MBytes/sec) and Maxtor Ultra ATA/133 MBytes/second data transfer rates
• Supports 48-bit addressing
• 2 MB buffer with multi-adaptive cache MANAGER
• 5400 RPM spin speed
• 10 ms seek time
• ZONE density and ID-less recording
• Outstanding shock resistance at 300 Gs
• High durability with 50K contact start/stop cycles
• Advanced multi-burst on-the-fly Error Correction Code (ECC)
• Extended data integrity with ECC protected data and fault tolerant servo synchronization fields
• Supports EPA Energy Star Standards (Green PC Friendly) with ATA powering savings commands
• Auto park and lock actuator mechanism
• Low power consumption
  

  MODELS	5A250J0	5A300J0
  Formatted Capacity	250GB	300GB
  SECTORS per Drive (max LBA)	490,234,752	585,940,320
  Integrated Interface	Maxtor Ultra ATA/133 (ATA-5/ATA-6)
  Recording Method	PRML
  Servo Type	Embedded
  Number of Servo SECTORS	256
  Data ZONES per Surface	16
  Data SECTORS per Track (ID/OD)	581/1126
  Areal Density (Gbits/in  max ID/OD)	61.5/53 (80/160 disk configuration)
  Seek Times (typical read, ms)
  Track-to-Track	<1.0
  Average (normal seek)	≤ 10
  Full Stroke (normal seek)	24
  Average Latency (ms)	5.55
  To/From Interface (Maxtor Ultra ATA/133 up to)	133
  Sustained (ID/OD up to nn.n, where nn.n is the maximum transfer rate possible)	24/42