04 3550600 052 7036860

Pyle Pro PDWM3365.5 2-Person Wireless Combo Microphone System (573 to 597.8 MHz)

Add to Wishlist

AED899.00

Add to Wishlist
Key Features
  • For Two Presenters or Performers
  • 2 x Lavalier Mics, 2 x Headset Mics
  • 2 x Bodypack Transmitters
  • Dual-Channel Tabletop Receiver
  • Adjustable Volume per Channel
  • Independent Balanced XLR Outputs
  • Includes AA Batteries and Rackmount Kit
  • Operating Range up to 164′

Pyle Pro PDWM3365.5 Overview

The Pyle Pro PDWM3365.5 is a wireless combo microphone system offering a budget-friendly solution for houses of worship, clubs, educational institutions, and conference centers needing to accommodate two presenters, performers, teachers, or participants. By including multiple types of microphones, this system achieves versatility at a low price point.

The PDWM3365.5 comes with a dual-channel tabletop receiver, two bodypack transmitters, two lavalier microphones, and two headset mics. The headsets are optimal for fitness instructors and dancer/singers and the lavaliers are ideal for visual discreetness on speakers and interviewees.

With per-channel volume controls and two independent XLR outputs, the receiver allows simple level adjustments and proper hookup to separate inputs on a mixing console or multitrack recorder. The receiver is powered by an included power adapter, while the transmitters run on AA batteries (also included).

Bodypack Transmitters and Lavalier/Headset Microphones

Each bodypack transmitter features a 3.5mm TS input, adjustable gain, and a lavalier/headset mode switch, optimizing it for use with either of the wired mic types included with the system. Use the clip-on lavalier when you need to keep the mic hidden or switch to the wearable dual-ear headset for active performers and instructors. Both mics enable the subject to keep their hands free.

Dual-Channel Tabletop Receiver

The tabletop receiver features two built-in receiver modules, each with a volume control, AF and RF LEDs, a backlit LCD screen, and a balanced 3-pin XLR output. An unbalanced 1/4″ mixed output is also provided for routing a blend of both channels to a single input on a PA system. The receiver’s antennas are detachable for safe and compact storage.

System Features

  • Operates in the UHF spectrum from 573 to 597.8 MHz, away from Wi-Fi and Bluetooth interference
  • Eight selectable channels
  • Supports a maximum range of 164′
  • Manual transmitter/receiver syncing via up/down buttons
  • Squelch circuit analyzes signal strength to reduce the likelihood of noise burst from RF (radio frequency)
  • Red light on each bodypack transmitter warns that less than one hour of battery life remains
  • Includes four AA batteries to power the bodypack transmitters
  • Includes rackmount hardware for the receiver
SKU: PDWM3365.5 Category: Tag:

Pyle Pro PDWM3365.5 Specs

System
Wireless Transmission Analog UHF
Number of RF Channels 8
Included Transmitters 2 x Bodypack with Microphone
Diversity Non-Diversity
RF Frequency Band 573 to 597.8 MHz
RF Bandwidth 24.8 MHz
RF Channel Scanning Manual
Max Operating Range 164′ / 50 m
Max Systems per Setup 2
Encryption None
Modulation FM
Receiver
Form Factor Tabletop / Rackmount
Mounting Options Tabletop
Rackmount (with Included Hardware)
Rackmount Size 1 RU (Full Rack)
Antenna 2 x 1/4 Wave External, Detachable (Rear-Mount)
Number of Audio Channels 2
Audio I/O 2 x XLR 3-Pin Male Balanced Output
1 x 1/4″ TS Female Unbalanced Output
Frequency Response 100 Hz to 18 kHz ±3 dB (Dependent on Mic)
Network I/O None
Word Clock I/O None
Approximate RF Sensitivity -105 dBm
Adjacent Channel Isolation >70 dB
Spurious Rejection: >70 dB
Power Requirements AC/DC Power Adapter
AC/DC Power Adapter 12 to 15 VDC at 1 A (Included)
AC Input Power 120 to 220 VAC, 50 / 60 Hz
Display & Indicators 1 x LED (Power)
4 x LED (AF Level)
4 x LED (RF Level)
4 x Backlit Graphic LCD (Channel, Frequency)
Operating Temperature -20 to 165°F / -29 to 74°C
Dimensions 8.5 x 2 x 6.7″ / 21.6 x 5.1 x 17 cm
Transmitter 1
Transmitter
Form Factor Bodypack
RF Output Power > 10 mW
Audio I/O 1 x 1/8″ / 3.5 mm TS Female Unbalanced Input
Pad None
Muting Off/On Switch
Auto-Level Control No
Signal Processing None
Frequency Response 100 Hz to 18 kHz ±3 dB (Dependent on Mic)
Sync Method Manual
Antenna 1 x 1/4 Wave External, Fixed
Power Requirements Battery
Battery Type 2 x AA (Included)
USB/Lightning Connectivity None
Display & Indicators 1 x LED (Battery Status)
1 x Graphic LCD (Channel)
Operating Temperature -20 to 165°F / -29 to 74°C
Dimensions 2.5 x 4 x 1″ / 6.3 x 10.2 x 2.5 cm
Microphone
Form Factor Lavalier
Sound Field Mono
Capsule Electret Condenser
Output Connectors 1 x 1/8″ / 3.5 mm TS Male Unbalanced
Operating Temperature -20 to 165°F / -29 to 74°C
Microphone 2
Form Factor Headset
Sound Field Mono
Capsule Electret Condenser
Output Connectors 1 x 1/8″ / 3.5 mm TS Male Unbalanced
Operating Temperature -20 to 165°F / -29 to 74°C

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Pyle Pro PDWM3365.5 2-Person Wireless Combo Microphone System (573 to 597.8 MHz)”

There are no reviews yet.

Related products