04 3550600 052 7036860

Pyle Pro PDWM4560.5 Quad-Channel Wireless Combo Microphone System (572.1 to 597.8 MHz)

Add to Wishlist

799.00 د.إ

Add to Wishlist
Key Features
  • For 4 Presenters/Performers/Instructors
  • 4 x Lavalier Mics, 4 x Headset Mics
  • 4 x Bodypack Transmitters
  • Quad-Channel Tabletop Receiver
  • Adjustable Volume per Channel
  • Independent Balanced XLR Outputs
  • Unbalanced 1/4″ Mono Output
  • Includes AA Batteries and Rackmount Kit
  • Operating Range up to 164′

Pyle Pro PDWM4560.5 Overview

The Pyle Pro PDWM4560.5 is a wireless combo microphone system offering a budget-friendly solution for houses of worship, clubs, educational institutions, and conference centers needing to accommodate up to four presenters, performers, instructors, or participants. By including multiple types of microphones, this system achieves great versatility at a low price point.

The PDWM4560.5 comes with a quad-channel tabletop receiver, four bodypack transmitters, four lavalier microphones, and four headset mics. The headsets are optimal for fitness instructors and dancer/singers, while the lavaliers are ideal for visual discreetness, allowing you to swap between the headworn headset mics and the clip-on lavalier mics according to the preference of the subjects and the sound technician.

With per-channel volume controls and four independent XLR outputs, the receiver allows simple level adjustments and proper hookup to separate inputs on a mixing console or multitrack recorder. The receiver is powered by an included power adapter, while the transmitters run on AA batteries (also included).

Headset and Lavalier Microphones

The PDWM4560.5 comes with four headset microphones and four lavalier mics. Use the headset mics for fitness instructors, dancer-singers, presenters, and preachers. The lavalier mics is ideal for situations where visual discreetness is preferred and when the subjects don’t want to wear a mic on their head. No matter which mic you use, the unbalanced 3.5mm TS connection to the bodypack transmitter is the same.

Bodypack Transmitters

Each bodypack transmitter features a 3.5mm TS input, adjustable gain, and a lavalier/headset mode switch, optimizing it for use with either of the wired mic types included with the system. Both mics enable the subject to keep their hands free.

Quad-Channel Tabletop Receiver

The tabletop receiver features four built-in receiver modules, each with a volume control, AF and RF LEDs, and a balanced 3-pin XLR output. An unbalanced 1/4″ mixed output is also provided for routing a blend of all four channels to a single input on a PA system. The receiver’s antennas are detachable for safe and compact storage.

System Features

  • Operates in the UHF spectrum from 572.1 to 597.8 MHz, away from Wi-Fi and Bluetooth interference
  • Supports a maximum range of 164′
  • Squelch circuit analyzes signal strength to reduce the likelihood of noise burst from RF (radio frequency)
  • Red light on each bodypack and handheld transmitter warns that less than one hour of battery life remains
  • Includes eight AA batteries to power the bodypack transmitters
  • Includes rackmount hardware for the receiver
  • Includes 1/4″ audio cable for connecting the receiver to a mixer or PA system
SKU: PDWM4560.5 Category: Tag:

Pyle Pro PDWM4560.5 Specs

System
Wireless Transmission Analog UHF
Number of RF Channels 4
Included Transmitters 4 x Bodypack with Microphone
Diversity Non-Diversity
RF Frequency Band 572.1 to 593.966 MHz
573 to 597.8 MHz
575.3 to 596.2 MHz
RF Bandwidth Up to 24.8 MHz
Max Operating Range 164′ / 50 m
Max Systems per Setup 1
Encryption None
Deviation ±40 kHz
Modulation FM
Receiver
Form Factor Tabletop / Rackmount
Mounting Options Rackmount (with Included Hardware)
Rackmount Size 1RU
Antenna 2 x 1/4 Wave External, Detachable (Rear-Mount)
Number of Audio Channels 4
Audio I/O 4 x XLR 3-Pin Male Balanced Output
1 x 1/4″ TS Female Unbalanced Output
Frequency Response 100 Hz to 18 kHz ±3 dB (Dependent on Mic)
Network I/O None
Word Clock I/O None
Approximate RF Sensitivity -105 dBm
Spurious Rejection: >70 dB
Power Requirements AC/DC Power Adapter
AC/DC Power Adapter 12 to 15 VDC at 1 A (Included)
Display & Indicators 4 x LED (AF Level)
4 x LED (RF Level)
1 x LED (Power)
Operating Temperature -20 to 165°F / -29 to 74°C
Dimensions 15.5 x 2.2 x 9.3″ / 39.4 x 5.6 x 23.6 cm
Transmitter 1
Transmitter
Form Factor Bodypack
RF Output Power 10 mW
Audio I/O 1 x 1/8″ / 3.5 mm TS Female Unbalanced Input
Pad None
Muting Off/On Switch
Auto-Level Control No
Signal Processing None
Frequency Response 100 Hz to 18 kHz ±3 dB (Dependent on Mic)
Sync Method Manual
Antenna 1 x 1/4 Wave External, Fixed
Approximate RF Sensitivity -105 dBm
Power Requirements Battery
Battery Type 2 x AA (Included)
USB/Lightning Connectivity None
Display & Indicators 1 x LED (Battery Status)
Operating Temperature -20 to 165°F / -29 to 74°C
Dimensions 2.6 x 4.1 x 1.2″ / 6.6 x 10.4 x 3 cm
Weight 2.1 oz / 60 g
Microphone
Form Factor Headset
Sound Field Mono
Capsule Electret Condenser
Output Connectors 1 x 1/8″ / 3.5 mm TS Male Unbalanced
Microphone 2
Form Factor Lavalier
Sound Field Mono
Capsule Electret Condenser
Output Connectors 1 x 1/8″ / 3.5 mm TS Male Unbalanced

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Pyle Pro PDWM4560.5 Quad-Channel Wireless Combo Microphone System (572.1 to 597.8 MHz)”

There are no reviews yet.

Related products